Reviews Brake Rotor Alignment Tool

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression plates by flipping the switch on the handle.
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability.
  • Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency.
  • Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates.
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

Farbetter Mechanical Bike Disc Brake Kit, Including Front and Rear Caliper, Brakes Cables, Brake Levers, 160mm Rotor, with Cable End Tips Caps, Rotating S-Hook Clips, Disc Rotor Adjuster (Black)

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Brake Cable Kit, 1x Disc Rotor Adjuster, 4x Cable End Tips, 2x Rotating S-Hook Clips and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Ideal Replacement: Choose the best for each component, and you can upgrade it in one step with only one purchase. With fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets- Cable End Tips prevents wire core from bifurcating, resulting in uneven force on the wire core off-line.
  • Disc Rotor Adjuster help you to adjust the gap between rotor and caliper easily..
  • Widely Compatible: Suitable for most mountain bike of mechanical disc brake system. Please check the size of your bike and whether it is suitable to install mechanical disc brakes to avoid buying it by mistake..
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear,1Pair

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Mountain Bike Disk Brake Set G3/ HS1 Bicycle Disc Brake Kit Front and Rear 160mm Caliper Rotor with Bolts and Cable (HS1 A Disc Brake Set)

  • F160R140mm--front clipers,means choosing the 160mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 140mm rotor.
  • F180R160mm--front clipers,means choosing the 180mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 160mm rotor.
  • It is general for mountain bikes and electric bicycle?Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 44mm..
  • Disc brake Rotor, disc brake caliper and to make the disc brake pads can not be stained with oil, change the disc brake caliper or to make the disc brake pad before the rotors to avoid oil on the disc brake disc will affect the brake effect, you can use alcohol to clean the disc brake rotors..
Check Stock

ACETOP Bike Disc Brake Kit, Front & Rear Bicycle Aluminum Alloy Brake Caliper, 2 Pcs 160mm 6-Bolt Stainless Steel Disc Rotors for Mountain Bike, Road Bike, Folding Bike, BMX

  • High-quality Materials: Aluminum alloy bike disc brake calipers, anti-corrosion, anti-rust, high-temperature resistance. The brake surface polished on both sides, and brake is sensitive and quiet. The disc brake base design is resistant to breaking..
  • Appropriate Size: All aluminum alloy bike disc brake kit have 75 mm and 51 mm mounting bolt spacing, and each weighs 174g. The disc Rotor has an inner diameter of 44 mm, an outer diameter of 160 mm, and a thickness of 2 mm, each weighing 95g..
  • Stainless Steel Rotor: Stainless steel ultra-light rotor, which also has excellent braking force and modulation ability. The entire rotor has many ventilation holes to help dissipate heat..
  • Simple Operation: Equipped with 4mm hexagon screwdriver(Size: 60 mm x 22.5 mm.
  • Only for 12 Disc Rotor Titanium Bolts) ,which can be installed and disassembled the front & rear bike brake disc, and it is also very convenient for maintenance..
  • Widely Compatible: Our 6-Bolt rotor calipers exquisite workmanship, it is an ideal upgrade part for your bike, and suitable for most mountain bike and road bike mechanical disc brake systems, and can be used with the majority 6 Bolt compatible hub..
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

Star-Art Front and Back Disc Brake Kit - Aluminum Alloy Calipers, 2 Pcs Stainless Steel 160 mm Rotors & Cable & Brake Lever & 12 Bolts, Freewheel Threaded Hubs Hole Distance of 48mm

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

ZUKKA Bike Disc Brake Kit with 1 Pair Mountain Front and Rear Caliper Sets &160mm Rotors & Bicycle Brake Levers and Cable & 16 Bolts

  • Bike Disc Brake Kit Include: 2 x 160mm Rotor, 1 pair front rear brake caliper.
  • The center 6 bolt pattern diameter on the rotor is 44mm..
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm..
  • Cable actuated post mount mechanical disc brake calipers provide the excellent stopping power and are easy to service..
  • Dual piston brake pad actuation improves braking performance, while also preventing rotor deformation..
Check Stock

Shimano RT-MT800-S Disc Rotor - 160mm Center-Lock Silver/Black

  • The Shimano Deore XT RT-MT800 centerlock disc brake rotor features an advanced heat sync design..
  • Rotor construction uses Shimano FREEZA technology to boost heat dissipation and reduce fade.
  • Easy disc brake rotor installation with spline mount and lock ring.
  • Compatible with metal and resin brake pads.
Check Stock

Shimano RT-MT800-SS Disc Rotor - 140mm Center-Lock Silver/Black

  • The Shimano Deore XT RT-MT800 centerlock disc brake rotor features an advanced heat sync design..
  • Rotor construction uses Shimano FREEZA technology to boost heat dissipation and reduce fade.
  • Easy disc brake rotor installation with spline mount and lock ring.
  • Compatible with metal and resin brake pads.
Check Stock