Reviews Die Casting Valve Shaft

POLASTORM Aluminum 3 Blades Outboard Propeller for Yamaha Engines 20-30HP F Series 9 7/8X11 1/4 Pitch

  • Application: Prop fits YAMAHA 20-30HP with 10 spline tooth shaft, 20/25/30HP,F25HP. Prop comes with pressed in rubber bush as pictures showing. Please refer to below engines application chart..
  • HIGH STRENGTH:The innovation of aerospace casting technology to marine aluminium propellers is now a reality, boasting hybrid casting of strontium, aluminium and titanium that are far stronger and durable than ever before. Performing 280MPA tensile and 220MPA yield strength which much stronger than traditional die-casting and squeeze casting props..
  • EXTREME ANTI-CORROSION: Props are robotic powder-coated using AkzoNobel patented anti-corrosive coating powder. More important that it is environmentally safe..
  • EXCELLENT PERFORMANCE: Props are designed based on OEM blade geometry, with appropriate cupping and camber added. Excellent bow lift, acceleration and top speed as well reducing slip,increasing bite..
  • QUALITY GURANTEE: Don't be limited by policy. We offer 12 months free replacement guarantee for blades fracture and bush slipping. (Except normal wear, accidental damage, modification, improper installation.).
Check Stock

iShoot Foldable Telephoto Lens Bracket, All-Metal Long-Focus Lens Support, Lens Holder with 20cm Quick Release Plate for Arca-Swiss Fit Tripod Ball Head, Compatible with Canon Nikon Sony Cameras

  • 1. All parts of the foldable telephoto lens bracket are die-casting of aluminum alloy, surface polished, high temperature automotive painted, lightweight and rugged, weight about 520g.
  • Both sides with precision scales, skeleton structure in whole, designed with spirit level.
  • 2. Quick release plate of the long-focus lens support is die-casting of double aluminum plates of 7.5mm thick, 200mm long and 38mm wide, with RRS / ARCA-SWISS Standard interface.
  • back side with two 3/8 " screw holes, two 3/8" to 1/4" adapter screws provided.
  • 3. Knob between the two plates is for locking lens, about 50mm in diameter, built-in 1/4" screw.
  • Pallet is die-casting of double aluminum plates of 8mm thick, built-in self-locking device.
  • 4. Aluminum tube?s height can be adjusted to adapt to different volumes of the camera body.
  • built-in a metal shaft, one end is 1/4" screw, and the other end is butterfly-type knob.
  • 5. Quick release plate is RRS / ARCA-SWISS standard fit, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI / MARSACE ball head and clamp of AS standard, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK etc..
Check Stock

Yongxingjin Metal Tire Valve Stem Caps Suit for Toyota TRD All Models car Accessories Stylish car Wheels air caps with Logo 2021122814

  • The valve cover is made of aluminum alloy, which is corrosion-resistant and durable..
  • One time die casting, surface exquisite electroplating, avoid metal oxidation, rust, effectively improve wear resistance, texture and gloss..
  • With the Rubber Seals inside，the cap can replace the original bad valve cap of the tyre and also show the beauty characteristic of the tyre. your tire valves, extend their serving life. of the tyre and also show the beauty characteristic of the tyre..
  • Protecting the valve core , corrosion due to direct contact with clay, water and snow..
  • Package included 4 valve caps. Any assistance,pls feel free to contact us..
Check Stock

Dante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

Dante FP.GV.FB Flat Black Floor Plate for Dante Globe Valve - 1/2\ Threaded Mating Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

Valve stem Cover 4 Pieces Black Metal tire Cover with Logo Badge Applicable to Mercedes-Benz Valve Cap New C-Class A-Class E-Class C200L E300L GLC GLA GLK GLE Accessories

  • [Aluminum] High-grade anodized aluminum tire valve cover.
  • 4 pieces/pack. Customized tire valve stem caps, suitable for all valve stems, conform to....
  • [Process] One-time die-casting, exquisite plating on the surface, to avoid metal oxidation, rust, and effectively improve wear resistance, texture and....
  • [Functions] FIRST:Protecting the valve core , corrosion due to direct contact with clay, water and snow. SECOND:Preventing the flat tire and ensure....
  • [Easy to install] It can be easily installed and disassembled without any tools, everyone can tighten the tire valve stem in a few seconds..
  • [100% Satisfaction Guarantee] High-quality materials to ensure driving safety! If you have any questions, please feel free to contact us..
Check Stock

for TRD Valve stem Caps Universal Valve stem Cover Suitable for TRD Racing Development Sequoia Tundra Tacoma 4Runner PRO Series Accessories 4 Pieces

  • [Safe ]Our tire Valve Stem Caps has rubber rings.Preventing the flat tire and ensure stable tire pressure, ensure safe driving..
  • [Process] One time die casting, surface exquisite electroplating, avoid metal oxidation, rust, effectively improve wear resistance, texture and gloss..
  • [Safe] All dust caps for wheels has rubber rings, no air leaking on long, tough drives..
  • [Easy Installrion] Easy to Install or Remove without Any Tools, Everyone Can Screw Car Wheel Caps on Tire Valve Stem In Seconds!.
  • Every product we sell goes through a rigorous test before we sell it to ensure quality.If you are not satisfied with our product for any reason, just contact us..
Check Stock

Tire Valve Metal Stem Caps Compatible with Car Wheel Suit for Lexus RX350 UX200 NX300 IS300 ES350 GS350 GX460 LX570 RC300 LC500 Silver Metal Air Valve Caps 4PCS Accessories

  • ☞MATERIAL: The valve cap is made of Zinc Alloy, which is corrosion resistant, durable. Package included 4pcs..
  • ☞One time die casting, surface exquisite electroplating, avoid metal oxidation, rust, effectively improve wear resistance, texture and gloss..
  • ☞ Easy install and replace,with the Rubber Seals inside，the cap can replace the original bad valve cap of the tyre and also show the beauty characteristic of the tyre. your tire valves..
  • ☞Protecting the valve core , corrosion due to direct contact with clay, water and snow..
  • ☞ 100% satisfaction,all items would be strictly checked before packing,if any problems when u received,pls feel free to contact us..
Check Stock

Quicksilver 8M0129072 Floating Prop Block

  • Chicago Die Casting 5-1/2 Pillow Bearing Block 9-500-5 1/2.
Check Stock

Banax Kaigen 1000 Electric Reel with Warranty

  • PROPULSION LINE MANGENMENT SYSTEM:The most obvious component of the Propulsion Line Management System is the new Propulsion spool lip design. Through tens of thousands of casting tests and computer simulations it has been determined that this new spool lip design provides longer casting distances than a standard spool lip design while preventing backlashes and wind knots from forming..
  • Super Steady Oscillation :Sougayilang DYL spinning graphite body enhanced stainless steel shaft, CNC aluminum spool and interchangeable right or left handle, deliver a reliable reel for years of big game fishing. 4.7:1 Gear Ratio is designed for fighting against monster catching, enable confidence to land the biggest saltwater fish out there..
  • Wide Range Drag Adjustment: Strong oversized shaft, compact self-balanced system rotors provide rock steady retrieve when landing big ones. Strong Aluminum Spool is able to hold heavy duty monofilament or braid lines for long distance casting. Tuna, shark, yellow tails, striper bass, king fish, mackerel, all big ones are within expectation to challenge..
  • DURABLE:Provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This means the ....
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with Honda, Ryobi, Simpson, Craftsman Homelite and More

  • ...t. The standard bolt pattern fits most 7/8'' vertical shaft gas-powered pressure washers. Packet includes a chemical hose with filter, mounting bolts, shaft key, and instruction booklet to get your pressure washer back in life within 10 minutes. (*Fit 7/8'' vertical shaft engines ONLY).
  • A high-quality thermal relief valve is matters: It protects the pump from overheating while in bypass mode, releases hot water and intakes cooler water to keep the pump to work at a safe temperature and extend the life of the pump. The thermal relief valve come with protective cap to provide the high-pressure water from spattering directly and protect your safety..
  • Professional technical support: If you have any problems in pump installation or any usage problems in after sale, we will provide you professional technical support. If you need pre-sale model matching consultation or replacement services, please feel free to contact us by email at any time..
Check Stock

MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit Brass,Silver,Red,Blue

  • PERFECT TOOL for replacing damaged valve cores with R1234yf refrigerant in the system without losing the systems charge.
  • ATTACHES TO R1234yf SERVICE PORTS to quickly and easily remove and replace valve cores without the loss of refrigerant.
  • BALL VALVE DESIGN with stainless steel ball provides smooth movement and durability.
  • KIT COVERS 17 mm and 14 mm high and low side service ports.
  • INCLUDES standard valve core shaft, GM large bore valve core shaft, Eaton R134a/R1234yf high side valve core shaft, low side 14 mm connector, high....
Check Stock

Iwatani Smokeless Korean Barbecue Grill YAKIMARU CB-SLG-1

  • body size: 303 (width) 278 (depth) 149 (height) mm / Weight: about 2.0kg / plate size (diameter): 233mm.
  • Material :( body): steel (powder coating) / (plate) aluminum die-casting (fluorine processing) / (burner) heat-resistant aluminum die-casting / (knob appliance plugs) ABS resin.
  • Continuous burning time: about 217 minutes ( when the temperature 20 ~ 25 , the measured value of the unexpired portion of the cassette gas one at high heat continuous combustion) / ignition system: piezoelectric ignition system / safety device: Pressure-sensitive safety equipment / container removable method: magnet system.
Check Stock