Reviews Diamond Grit Blade

Ii.2 Red Gear Grommets

  • 5-3/4" Taurus II.2 and 3.0 Replacement Diamond Coated Ring Saw Blade GRIT 80.
  • This 5-3/4" blade is the same size as the Standard blade.
  • Great for agressive cuts and blade is Omni-directional.
  • Seamless, stainless steel diamond coated replacement blade.
Check Stock

Milwaukee 48-00-1450 Sawzall Blade 9\ Diamond Grit

  • Includes(1) 6" Diamond Grit THE TORCHSAWZALL Blade.
Check Stock

BISupply Universal Jig Saw Blades Set of 5-46 Grit 4in Diamond Edge Jigsaw Blade Use as Tile Granite Ceramic Cutter

  • [For Your Masonry Needs]: BISupply 4-Inch 46 Grit T Shank Diamond Jigsaw Blade Porcelain Cutter 5-Pack is perfect for tile installers’ toolkits.
  • [Made to Last]: Hand jigsaw tool bar tile cutter is diamond-edged to help you cut tough masonry materials.
  • 46 grit of the jigsaw blade porcelain tile....
  • [Easy to Use]: Install the 1-inch (2.5cm) diamond tip jigsaw blade shaft into your jigsaw (tool not included).
  • At 4 inches (10.2cm), backsplash tile....
  • [Cut A Variety of Materials]: For straight, smooth cuts through granite, marble, porcelain, or ceramic tiles use t shank jigsaw blades.
  • [Perfect for Your Jigsaw]: Diamond tipped jigsaw blade removes materials with optimal control and designed for faster blade change.
Check Stock

EZARC Diamond Oscillating Blade Flush Cutting Oscillating Multi Tool Saw Blades for Grout Removal Mortar and Soft Tile Cut DO34F 3-Pack

  • 【Diamond Cutting Edge】This premium long lasting flush cutting diamond oscillating saw blade has 5 times longer life than carbide grit blades in....
  • 【Precise & Clean Cut】 Diamond grit edge has a kerf approx. 1/16 inch (1.6 mm), which can achieve a perfectly clean and precise cutting effect.....
  • 【Design for Tough】This diamond oscillating multi tool blade is used to remove defective tile grout, cut soft tiles, plaster, and porous concrete....
  • 【Application Scenarios】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work,....
  • 【Universal Fitment】 EZARC oscillating multitool blade set includes two additional adapters, which is compatible with most oscillating multi-tool....
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 40T (14080)

  • Table saw blade features #400 grit diamond-ground teeth for a smooth finish.
  • Precision-tensioned and balanced table saw blade for an accurate cut.
  • Construction-grade carbide teeth on these table saw blades for longer life.
  • 40 teeth and 20° hook angle with ATB grind.
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

EZARC Diamond Oscillating Tool Blade Set Multi Tool Mortar Cutting Saw Blades Precise for Grout Removal and Soft Tile Cut 4-Pack

  • 【Diamond Oscillating Blades Set】Great set with 3 different types of diamond saw blades, easily remove tough grout between tiled surfaces. Three....
  • 【Long-lasting & Durability】Diamond grit oscillating saw blades have 5 times longer life than carbide grit blades in tough applications. Our....
  • 【Precise & Clean Cut】 The diamond grit kerf design of the oscillating blades provides precise and clean cutting effect. Oscillating multitool....
  • 【Cutting Material】This diamond oscillating multi tool blade is used to remove defective tile grout, cut soft tiles, plaster, and porous concrete....
  • 【Multi-application】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove....
Check Stock

3 Pieces Diamond Sharpening Stone Diamond Knife Sharpener Plate Honing Whetstone for Kitchen Sharpening Dull, Blunt or Tired Edges (1000/ 2000/ 3000 Grit)

  • Simple Single Sided Plating: the diamond sharpening stone adopts the common single sided design, and you can get the most out of that side to hone your knife or blade, a simple way to produce a faster, cleaner cut.
  • Notable Tips: remember to wash the knife after honing with the diamond sharpening plate.
  • For good results, use with water or honing oil, do not put the knife sharpener in the dishwasher or immerse it in water.
  • Quality Material Selection: our diamond stone sharpener is made of diamond material with good wear and corrosion resistance, not easy to fracture or fade, serving you for a long time.
  • Proper Size for You: the diamond grit stone measures about 17 x 7.5 x 0.1 cm/ 6.69 x 2.95 x 0.04 inches, a suitable size for you, and this small size makes it light, portable to carry around, very convenient.
  • Multiple Choices: you will receive 3 pieces of diamond honing stones in different styles, including 1000 grit, 2000 grit and 3000 grit, sufficient quantity and a variety of choices to meet your needs.
Check Stock

BOSCH RCB8DG 1-Piece 9 In. Grit 50 TPI Diamond for Cast Iron and Block Reciprocating Saw Blade

  • Diamond Grit cutting edge for cutting cinder block, brick, cast iron, pipe and other abrasive materials..
  • Up to 3-times faster and 3-times longer life than carbide grit blades.
  • Vacuum brazed diamond grit blade for heavy use.
Check Stock

Work Sharp WSBCHBSS Benchstone Knife Sharpener

  • PRECISE, CONSISTENT: Sharpening Guides can be set to 20 or 25° or removed to sharpen freehand..
  • TRI-BRASIVE BENCHSTONE: Angle Guided, 3-sided abrasive sharpening system. Quickly index between coarse and fine diamond and fine ceramic stone. Medium (400) Grit Diamond and Fine (800) Grit Diamond Plates quickly restore a sharp edge, while the Fine Grit Ceramic Stone creates an incredibly keen edge on any knife..
  • PIVOT-RESPONSE : Abrasive follows the curve of the blade to maintain contact and create the best results. Feature can be locked out to provide a rigid sharpening surface for a wide range of knife & tool sharpening applications..
  • Additional angle guides for 15 and 17 degrees are available. Replacement abrasives are available to service your tool for long life..
  • 3-YEAR WARRANTY - protects every Work Sharp tool against defects due to workmanship or design.
Check Stock

3Pack 4-1/2-Inch 60-Grit Diamond Compact Circular Saw Blade with 3/8-Inch Arbor, for Cutting Ceramic Tile, Stone Tile, Backer Board and Cement

  • AFFORDABLE: Why pay $10 per blade? OA-BRES saw blades match or exceed name-brand quality at a fraction of the price. 3Pack 4-1/2-Inch(115mm) 60-Grit Diamond Disc Compact Circular Saw Blade, arbor size 3/8-inch(9.5mm) .The number of saw blades is 3 times that of the Rockwell RW9283 , with better quality and better price..
  • DURABLE: Manufactured with high quality and durable heat-treated manganese steel and #60 diamond grit can provide longer cutting life..
  • ADVANCED DESIGN: The segmented design improves airflow, helps the saw blade to dissipate heat, and remove cutting dust, provides a smooth, fast, clean and efficient cutting. helping to maintain the saw blade's cutting performance..
  • APPLICATION:Max 13,000 RPM, our diamond disc are ideal for cutting ceramic tile, stone tile, backer board, cement, concrete, roof tiles, brick, block, marble, granite, paving, masonry ..
  • COMPATIBLE: Fit for Rockwell RK3441K & RK3440K 4-1/2 inch mini circular saw, WORX WX429L and PORTER-CABLE Pce381..
Check Stock

LENOX Tools Reciprocating Saw Blade Double-Tang 11-inch Diamond-Grit 1766356

  • Dual-tang design allows the user to flip the saw blade around, reducing the amount of wasted grit.
  • Diamond-grit cutting edge and dual tangs help ensure long saw blade life.
  • Narrow kerf edge removes less material for fast cutting.
  • Reciprocating saw blade design provides straight, clean cuts.
Check Stock

Erfo Double-Sided Diamond Sharpening Stone, Knife Sharpener Whetstone 300/1000 Grit Fine/Coarse, 8 X 3 Inch

  • 【Sturdy & Durbale】: The sharpening stone kit uses high-quality abrasives and adopts lector diamond plating technology, which is more strong and durable than waterstone. Diamond sharpening stone has long service life and can be used for a long time..
  • 【Double-sided Design】: Coarse grinding and fine grinding combination, one diamond stone can easily solve coarse and fine sharpening work. 300 Grit side is suitable for any daily sharpening, 1000 Grit will help you make the tool smoother after using 300 Grit..
  • 【Fine Workmanship】: Diamond bench stone has a simple and elegant shape, smooth and neat edges, no paddles, you can use it with peace of mind. Diamond stone sharpener is easy to maintain than other whetstone..
  • 【Multi-purpose】: This whetstone sharpener has widely range of applications. You can use it to sharpen any blade, such as kitchen knife set, chef’s knife, steak knife, sontoku knife, paring knife, wood chisels, jade, etc..
  • 【Warm Tips】: After sharpening, you need to clean the knife before cutting. Use with water or honing oil for better effect..
Check Stock