Reviews Diamond Blade For Marble
EZARC 4-1/2 inch Diamond Blade, Super Thin Diamond Saw Blades for Angle Grinder, 4.5\ Tile Blade for Cutting Porcelain Ceramic Granite Marble Tile (2-Pack)
- ★【Long Lasting Diamond Blade】High performance alloy steel matrix with consistent diamond content and even distribution provide long life, enhanced material removal. Our tile blade with 10 mm segment height guarantees a long lifetime even in the most demanding materials..
- ★【Superior Performance】Diamond saw blades with super thin X teeth turbo mesh rim not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction. Our grinder diamond blade has good cutting quality without broken edges, even on super hard fine slate and marble..
- ★【Fit Size】Our 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor (Includes a adaptor for 20mm arbor). Size:4-1/2 Inch.
- ★【Professional Design】This diamond tile blade with integrated flange design provides the best cutting quality straight, vibration-free cutting and enhances stability and safety. Silencer Holes help to low down the noise and avoid heat damage during the cutting process..
- ★【Wide Applications】EZARC tile cutter blade is designed for extremely smooth and clean cutting porcelain, granite, ceramic tile, sandstone quart....
Check StockBISupply Universal Jig Saw Blades Set of 5-46 Grit 4in Diamond Edge Jigsaw Blade Use as Tile Granite Ceramic Cutter
- [For Your Masonry Needs]: BISupply 4-Inch 46 Grit T Shank Diamond Jigsaw Blade Porcelain Cutter 5-Pack is perfect for tile installers’ toolkits.
- [Made to Last]: Hand jigsaw tool bar tile cutter is diamond-edged to help you cut tough masonry materials.
- 46 grit of the jigsaw blade porcelain tile....
- [Easy to Use]: Install the 1-inch (2.5cm) diamond tip jigsaw blade shaft into your jigsaw (tool not included).
- At 4 inches (10.2cm), backsplash tile....
- [Cut A Variety of Materials]: For straight, smooth cuts through granite, marble, porcelain, or ceramic tiles use t shank jigsaw blades.
- [Perfect for Your Jigsaw]: Diamond tipped jigsaw blade removes materials with optimal control and designed for faster blade change.
Check StockGRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches
- UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
- INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
- DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
- HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
- SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check StockDiamond Core Drill Bit Set - for Porcelain Tile Ceramic Marble Granite Drilling,BRSCHNITT 1/4' 5/16' 3/8' 4/5' 1' 1-3/8' 1-1/2' 2' 2-1/2' (6 8 10 20 25 35 38 50 65mm) Vacuum Brazed Diamond Hole Saw with 5/8-11 Thread
- ✔Size Diamond drill bit--1/4" 5/16" 3/8" 4/5" 1" 1-3/8" 1-1/2" 2" 2-1/2" (6 8 10 20 25 35 38 50 65mm), diamond height 10mm, total length 60mm, 5/8-11 thread.
- ✔Size Diamond blade:5 inch (125mm),diamond height 10mm ,segment thickness 1.2mm ,Arbor 7/8"(22.23mm) , wet or dry cutting.
- ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime.
- ✔Wide Application of blade --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
Check StockUtoolmart 4-1/2 Inch Diamond Saw Blades Segmented Rim Cutting General Purpose for Granite and Marble Blue 2 Pcs
- 【Parameter】- Product Name: Diamond Saw Blade.
- 【Material】- Made of diamond and cobalt, being titanium plated, sintered and bonded..
- 【Highly Efficient】- High sharpness and straight cutting edge makes the cutting stable and efficient..
- 【Feature】- Hot pressing process ensures that the diamond blade and the blade body are firmly combined. This saw blade has low hardness, high density, and good thermal conductivity..
- 【Usage】- Suitable for cutting non-metallic materials such as granite, marble and external wall hanging..
Check StockSHDIATOOL Metal Cutting Diamond Blades Set of 2 Pieces
- 1PC Metal Cutting Diamond Disc plus 1PC All Purpose Metal Cutting Blade.
- Metal Cutting Diamond Discs are specially designed for cutting steel tube, iron rebar (Less than dia 25mm), angle steel.
- All Purpose Metal Cutting Blade has Wide Application - Granite, Marble, Aluminum, Steel, Wood....
- No risk of break of disc,so much safer than abrasive cut-off wheel.
- Blades are made with high hardness diamond, could be used for cutting all ferrous and non-ferrous metals, with a Lower Cost per Cut.
Check StockDiapro 6 Inch Granite Blade Diamond Turbo Saw Blade with 5/8”-11 Flange for Cutting and Grinding Granite Marble Concrete Brick…
- Dry cutting & grinding applications on one blade.
- 6" Diamond saw blade segment design provide extra sharpness when cutting.
- 6 inch Diamond blade with removable 5/8"-11 flange.
- Granite saw blade cutting and grinding for granite,marble,Engineer stone or concrete.
Check Stock7 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade, Dry or Wet Cutting Ceramic Granite Marble
- 【SPECIFICATIONS 】: Diameter: 7 Inch(180mm).
- Thickness: 0.06 Inch(1.6mm), Up to 8,600 maximum RPM. This diamond blade fits for most tile saws and handheld angle grinders..
- 【Super thin turbo mesh design 】 : Super thin turbo mesh rim diamond blade can provide you with a fast, precise, smooth and chip-free cutting experience. Thicker center to avoid vibrations and wobbling..
- 【Work efficiently】: The tile blade is suitable for wet and dry cutting, and wet cutting effect is better, can extend the service life of saw blades, X mesh turbo wave is conducive to cooling and provides high-efficiency cutting efficiency..
- 【Material】: The diamond cutting wheel is made of high quality diamond, impact-resistant and high-temperature resistant..
- 【Widely Application】: Our grinder blade are specially designed for cutting porcelain, brick, ceramic tile, granite, sandstone quartz, marble, , slate, cement backer board..
Check StockT-REASURE 3Pcs 2inch Circular Saw Blade, High Speed Steel Mini Circular Saw Blade Cutting Blade Rotary Tool with 6mm Mandrel for Glass, Soft and Hard Wood Cutting
- Premium Material: Made of high quality sturdy high speed steel material, strong and durable, small size and portable, powerful and blade sharply..
- Work Efficiently: Mini saw blade teeth are very sharp which ensure fast and fluent cutting, will not damage the wood and will not burr and glitches. Make your woodworking work more fine..
- Mini Circular Saw Blade Set: 3 pieces blades: black(High-speed steel cutting blades), Silver(tungsten carbide cutting blades), yellow(diamond cutting blades) and a 6mm mandrel..
- Perfect Fit: Suitable for marble cutting machines, electric hand saws, sliding table saws, etc. Outer Diameter is 54.8mm/2inch.
- Saw depth limiter keeps your cutting work precise and accurate..
- Multipurpose: The diamond blade is ideal for grout, marble.
- the high-speed steel blade specializes in cutting right through metal, steel, carpet, glass, and copper.
- The tungsten carbide blade makes cutting hardwood, plywood, laminated flooring, drywall and plastic easily..
Check StockOKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite
- 【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
- 【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
- 【Applicable type】:Concrete cutting machine saw blade can be used for dry/wet cutting.
- 【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
- 【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.
Check StockQEP 6-7008BW 7-Inch Black Widow Micro-Segmented Rim Diamond Blade, 5/8-Inch Arbor, Wet Cutting, 8730 Maximum RPM
- Premium-grade, thin-rim diamond blade for fast wet cutting of porcelain, ceramic, granite and marble tile.
- Ideal for high speed cutting of hard masonry tile.
- Unique diamond-shaped laser cutouts prevent blade wobble and keeps blade cooler for a longer life.
- 7mm rim height for a longer life and for increased cutting contact with the blade.
Check StockQEP 6-8008BW 8-Inch Black Widow Micro-Segmented Rim Diamond Blade, 5/8-Inch Arbor, Wet Cutting, 7640 Maximum RPM
- Premium-grade, thin-rim diamond blade for fast wet cutting of porcelain, ceramic, granite and marble tile.
- Ideal for high speed cutting of hard masonry tile.
- Unique diamond-shaped laser cutouts prevent blade wobble and keeps blade cooler for a longer life.
- 7mm rim height for a longer life and for increased cutting contact with the blade.
Check StockEZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)
- 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
- 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
- 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
- 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock