Reviews Delay Switch

BOSCH SECURITY VIDEO DS936 PIR Ceiling Mount Motion Detector (NA)

  • WIDE APPLICATIONS：360° embedded automatic infrared PIR motion sensor switches are widely used in dynamic lighting, corridors, bathrooms, basements, warehouses, garages and other places, automatic exhaust ventilation fans and other electrical appliances..
  • PIR MOTION SENSOR：The LED light bar switch can detect human movement by detecting the light emitted by the human body. 360° infrared recessed pir ceiling motion sensor detector light switch has a built-in temperature compensation chip to reduce the temperature shock sensing distance..
  • INTELLIGENT BRIGHTNESS SENSOR：The motion sensor switch adopts photosensitive control, which will not turn on the light in the daytime or under strong light conditions. You can also choose to turn on the light in any light environment..
  • 360 DEGREES CONE ANGLE：The 360-degree cone angle detection range of the PIR motion sensor switch: high sensitivity and stability, effective energy saving, and improved efficiency. Installation method: wall-mounted, suction-point installation, and ceiling-mounted installation..
  • TIME DELAY：The intelligent induction of the IR sensor light switch, it will automatically turn off after a period of delay after the person leaves. After it is turned on within the delay time, if there is no....
Check Stock

PIR Motion Sensor, WiFi Smart Home PIR Motion Detection Sensor Wireless Security Burglar Alarm Sensor for Indoor Outdoor

  • 【Warm Tips】: To figure out your values for the Sensitivity , Please set the delay time to its minimum value first , this will save your time..
  • 【Motion Activated】: Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
  • 【Delay Time Adjustable】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
  • 【Wide Application】: You can use this sensor switch in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..
Check Stock

Sensky SK037 3-12M 360 Degree Ceiling Occupancy Sensor PIR Motion Sensor Switch High Sensitive Motion Sensor Light Switch(110V-240VAC)

  • 【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements..
  • 【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night..
  • 【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, the sensor switch can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room..
  • 【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan....
Check Stock

DynaLock 6350 6350 Series Four Zone Monitor Station for Delayed Egress

  • Four zone monitor station is designed to work in conjunction with up to four Series 3101B delay egress systems.
  • Each 6350 is mounted on a standard two gang plate and includes four bi-color LED’s and one sounder with mute switch, to visually and audibly signal delay egress status at a remote location.
Check Stock

Donner Compressor Pedal, Donner Guitar Delay Pedal

  • 【Advanced Compressor Pedal】Donner’s comprehensive pedal can smoothen out dynamics between the high and low frequencies without degrading the original sound, offering you a more even and robust sound..
  • 【Versatile Functions】Our Ultimate Comp features an easy-to-use tone control: COMP (compression intensity), TONE (brightness) and LEVEL (output volume) for different uses. These dedicated controls provide you a superb sound shaping..
  • 【Two Practical Modes】The guitar compressor pedal also offers a mode selector switch of NORMAL and TREBLE. Signal can be transmitted in two modes to satisfy various needs of your playing..
  • [Analog Delay Pedal] Reproduces the warm and natural classic vintage analog delay sound..
  • [Flexible Delay Pedal] 20ms to 620ms of delay time. Adjustable delay level and feedback..
Check Stock

Taidacent Vibration Switch Module 12V High Sensitivity Vibration Delay Module Plus Relay Plus Delay Three-in-One Module Alarm Trigger

  • Shipping list: One 12V vibration sensor delay module with one ultra-high sensitivity vibration sensor..
  • corridor delay switch, delay energy-saving products.
  • connected to the vibration sensor can do a variety of alarm delay trigger, such as earthquake alarm, burglar alarm, car burglar alarm.
  • the shock sensor can also be applied to the car start automatic trigger control related products.
  • The machine equipment stops the delay alarm trigger..
Check Stock

Automatic Vacuum Switch for Power Tools Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping Monitor Power Parameters Adjustable Actuation Threshold

  • 【Upgraded Automatic Vacuum Switch】: The automatic vacuum switch features unique current sensing technology, which can turn the vacuum on....
  • 【Shutoff Delay】: In addition to automatically turn on your tool and vacuum cleaner, the automatic switch can also delay turn off the vacuum by 7....
  • 【New Updated Design】: The automatic sawdust vacuum switch features matte surface and curved edge design, which is textured and has nice touch....
  • 【Wide Application】: The actuaion threshold of vacuum autoswitch is approximately 0.25 amps (27.5 watts at 110V, 30 watts at 120V), ideal switch....
  • 【Safe To Use】: The automatic power tool switch is made of high-quality material, adopt UL-certified 14AWG power cord and quality ABS plastic case,....
Check Stock

Miniature Hidden Beeper/Cricket Prank Very Annoying Joke

  • Hide this miniature device and drive your coworkers, friends, and family members crazy! Better yet, hide two or more in the same room for additional....
  • Chirps like a cricket after a random delay. Then it goes to sleep until it wakes up and chirps again after another random delay..
  • Has built-in switch to select one of (3) modes: Mode 1 - Beeps after a random time delay at single tone at a tone/pitch that you select. Mode 2 -....
  • Also includes “stealth mode” feature which allows you to set an approximate time delay until the next beep/chirp occurs. (Subsequent beeps/chirps....
  • Runs for months on the included and replaceable CR2032 coin cell..
Check Stock

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
Check Stock

Sensky BS010H DC 12V-30V 3A Motion Activated Sensor Switch, PIR Motion Sensor Switch with Long Distance and Time Adjustable (Black-Without Light Sensor)

  • 【Warm Tips】： To figure out your values for the Sensitivity , Please set the delay time to its minimum value first , this will save your time..
  • 【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
  • 【Delay Time Adjustable】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
  • 【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..
Check Stock

Timer Relay DC 12V 24V Time Delay Relay Controller Board, PEMENOL LCD Display Digital Timer Switch Trigger Cycle Timer Module for Smart Control Power On-Off Controller

  • ...of Parameters: The current mode and parameters are clear at a glance, very clear, simple and practical. In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system. In P4 ~ P7 mode, short press the DOWN key to switch the display content (running time/cycle number).
  • ★Support Button Trigger Control: The relay module delay power off and trigger delay cycle timing circuit switch Support button trigger control, high and low level trigger, switch control, suitable for most occasions.
  • ★With Reverse Connection Protection: This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn.
  • ★Support UART Data Upload and Parameter Setting: You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off. For more details, please read the user manual.
  • ★Automatic Sleep Function: In the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function (L-P selects on to start the sleep function, about five minutes, without any ope....
Check Stock

ENERLITES PIR Motion Occupancy Vacancy Motion Sensor Light Switch, 500W, 5A, Motion Sensor Night Light, Single-Pole, Smart LED Backlight, Neutral Not Required, Ground Required, HMOS-J-W, White

  • Motion detector light switch replaces standard switch, automatically turns connected load ON / OFF based on motion detected.
  • Smart LED backlight will turn on when motion is detected for easy location in the dark in vacancy mode.
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs.
  • Time delay options: 15 sec (Test), 15 min, 30 min. Motion sensor will turn off after the delay time is up. Single pole use only. Not for three-way wiring.
  • Neutral wire not required, ground wire required for installation. 120-277VAC, CFL/LED: 150W, incandescent/halogen: 500W, motor: 1/8HP. Motion sensor wall switch ranges 180 Degree, 700 sq. ft. coverage. Operating temperature (32 – 131°F). UL listed.
Check Stock

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock