Reviews Delay Time Switch

BOSCH SECURITY VIDEO DS936 PIR Ceiling Mount Motion Detector (NA)

  • WIDE APPLICATIONS：360° embedded automatic infrared PIR motion sensor switches are widely used in dynamic lighting, corridors, bathrooms, basements, warehouses, garages and other places, automatic exhaust ventilation fans and other electrical appliances..
  • PIR MOTION SENSOR：The LED light bar switch can detect human movement by detecting the light emitted by the human body. 360° infrared recessed pir ceiling motion sensor detector light switch has a built-in temperature compensation chip to reduce the temperature shock sensing distance..
  • INTELLIGENT BRIGHTNESS SENSOR：The motion sensor switch adopts photosensitive control, which will not turn on the light in the daytime or under strong light conditions. You can also choose to turn on the light in any light environment..
  • 360 DEGREES CONE ANGLE：The 360-degree cone angle detection range of the PIR motion sensor switch: high sensitivity and stability, effective energy saving, and improved efficiency. Installation method: wall-mounted, suction-point installation, and ceiling-mounted installation..
  • TIME DELAY：The intelligent induction of the IR sensor light switch, it will automatically turn off after a period of delay after the person leaves. After it is turned on within the delay time, if there is no....
Check Stock

Sensky SK037 3-12M 360 Degree Ceiling Occupancy Sensor PIR Motion Sensor Switch High Sensitive Motion Sensor Light Switch(110V-240VAC)

  • 【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements..
  • 【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night..
  • 【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, the sensor switch can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room..
  • 【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan....
Check Stock

Sensky BS010H DC 12V-30V 3A Motion Activated Sensor Switch, PIR Motion Sensor Switch with Long Distance and Time Adjustable (Black-Without Light Sensor)

  • 【Warm Tips】： To figure out your values for the Sensitivity , Please set the delay time to its minimum value first , this will save your time..
  • 【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
  • 【Delay Time Adjustable】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
  • 【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..
Check Stock

Miniature Hidden Beeper/Cricket Prank Very Annoying Joke

  • Hide this miniature device and drive your coworkers, friends, and family members crazy! Better yet, hide two or more in the same room for additional....
  • Chirps like a cricket after a random delay. Then it goes to sleep until it wakes up and chirps again after another random delay..
  • Has built-in switch to select one of (3) modes: Mode 1 - Beeps after a random time delay at single tone at a tone/pitch that you select. Mode 2 -....
  • Also includes “stealth mode” feature which allows you to set an approximate time delay until the next beep/chirp occurs. (Subsequent beeps/chirps....
  • Runs for months on the included and replaceable CR2032 coin cell..
Check Stock

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
Check Stock

UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
  • You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws.
  • the plastics case keep the module free from dust and water, which is available for more applications than the separate module..
Check Stock

Donner Compressor Pedal, Donner Guitar Delay Pedal

  • 【Advanced Compressor Pedal】Donner’s comprehensive pedal can smoothen out dynamics between the high and low frequencies without degrading the original sound, offering you a more even and robust sound..
  • 【Versatile Functions】Our Ultimate Comp features an easy-to-use tone control: COMP (compression intensity), TONE (brightness) and LEVEL (output volume) for different uses. These dedicated controls provide you a superb sound shaping..
  • 【Two Practical Modes】The guitar compressor pedal also offers a mode selector switch of NORMAL and TREBLE. Signal can be transmitted in two modes to satisfy various needs of your playing..
  • [Analog Delay Pedal] Reproduces the warm and natural classic vintage analog delay sound..
  • [Flexible Delay Pedal] 20ms to 620ms of delay time. Adjustable delay level and feedback..
Check Stock

EarthQuaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Guitar Effects Pedal

  • New custom-built enclosure, Flexi-Switch silent relay based switching for traditional latching or momentary operation, and updated reverb algorithm....
  • A dreamy sonic discovery device with up to 2 seconds of delay time and a lush reverb..
  • Features complete control over delay time, repeats, mix and voice (with the tone control), as well as control over the reverb length and mix.
  • It can run in one of 3 different modes to really play with your tone: Normal, Reverse and Swell.
  • Features an expression jack that can be assigned to one of six different controls using the 'EXP' selector switch.
Check Stock

ENERLITES PIR Motion Occupancy Vacancy Motion Sensor Light Switch, 500W, 5A, Motion Sensor Night Light, Single-Pole, Smart LED Backlight, Neutral Not Required, Ground Required, HMOS-J-W, White

  • Motion detector light switch replaces standard switch, automatically turns connected load ON / OFF based on motion detected.
  • Smart LED backlight will turn on when motion is detected for easy location in the dark in vacancy mode.
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs.
  • Time delay options: 15 sec (Test), 15 min, 30 min. Motion sensor will turn off after the delay time is up. Single pole use only. Not for three-way wiring.
  • Neutral wire not required, ground wire required for installation. 120-277VAC, CFL/LED: 150W, incandescent/halogen: 500W, motor: 1/8HP. Motion sensor wall switch ranges 180 Degree, 700 sq. ft. coverage. Operating temperature (32 – 131°F). UL listed.
Check Stock

Sensky BS010WL DC 12v to 30v Mini Pir Motion Sensor Switch Occupancy Sensor Switch for DIY LED Lighting, Light Sensor, time and Distance Adjustable (with Light Sensor)

  • 【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
  • 【Light Sensor Adjustable】: This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, when the room ambient light value is above 20 lux, the light won’t turn on, but when room ambient light value is less than 20 lux, the sensor can turn light on when motion detected within sensing range..
  • 【Delay Time Adjustable- Please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
  • 【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..
Check Stock

SENSKY BS010L DC 12V to 30V 3A Mini Pir Motion Sensor Switch,Occupancy Sensor Switch for Gun Safe, Kitchen Cabinet, Pantry, Closet led lighting (Black-With Light Sensor)

  • 【Motion Activated】 : Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting..
  • 【Light Sensor Adjustable】: This function allows you to use the motion sensor in different ambient condition, for example, you set the light sensor value to 20 lux, when the room ambient light value is above 20 lux, the light won’t turn on, but when room ambient light value is less than 20 lux, the sensor can turn light on when motion detected within sensing range..
  • 【Delay Time Adjustable- Please set this to its minimum value first then try to figure out your values for the Sensitivity and Light Sensor- this will save your time】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it..
  • 【Wide Application】: You can use this sensor in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting..
Check Stock

Pentax Wireless Remote Control C

  • 1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds..
  • 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached..
  • 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long..
  • 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times..
Check Stock

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock