Reviews D ring Shackles

BASE WAVE Marine Quick Release Fixed Bail Sailing Rigging Shackle (2 Pack-2'') for Sailboat

  • 【High Quality】304 Stainless Steel D Ring Shackles, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, glossy surface, solid design, abrasion resistant, strong load-bearing..
  • 【Size】1/2 inch (12mm), Max Open Width: 1" (25mm), Working Load Limit: 800kg/1763lbs, Perfect for boats, jeeps, connect loose ends of cables, chains, tow straps and snatch blocks....
  • 【Use For】12mm screw pin anchor shackles, used for coupling chain and wire rope for camping, hiking, tie downs, towing, off road recovery and sailing hardware..
  • 【Applications】D ring shackles are used of connection accessories, apply to a variety of boat or household applications, could be also used in loading and unloading of goods, mining equipment, forestry machinery, land transportation, hoisting machinery and etc..
  • 【Package Included】Pack of 6 pcs 1/2 inch -12mm screw pin anchor shackles, one-way screw, bolt design, more sturdy, easy and convenient to use..
Check Stock

EAG Rear Steel Bumper with D-Ring and Hitch Receiver Fit for 87-06 Wrangler YJ TJ

  • RECEIVER HITCH - 2" standard hitch receiver included..
  • ROBOTICALLY WELDED - Use of laser-cutting, CNC folding and robotic assembly welder..
  • MATERIAL & FINISH - Made of 5/32" steel sheet. Textured black powder coat finish for corrosion protection and durability..
  • D-RING SHACKLES - The D-ring mounts are welded on both inside and outside for extra strength. Two 4.75 ton capacity D-ring shackles are included..
Check Stock

Single Left or Right Jounce Bumper Bump Stop Cup Compatible with Wrangler TJ Grand Cherokee ZJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ.
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat....
  • D-RING SHACKLES - High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolators included..
  • RECEIVER HITCH - 2" standard Class 3 rated receiver hitch with safety chain loop..
  • EASY INSTALLATION - EAG rear bumper is engineered to be a direct bolt-on upgrade replacement for your car's original stock bumper reusing the factory....
Check Stock

EAG Assembled Front Bumper with LED lights Compatible with 1999-2004 Grand Cherokee WJ

  • FITMENT - Fit for 1999-2004 Grand Cherokee WJ..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000lbs. winches. High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolator included..
  • LED LIGHTS - Two 12W LED Lights, integrated LED models and wiring harness included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat finish..
  • EASY INSTALLATION - EAG modular front bumper is engineered to be a direct bolt-on upgrade replacement for your vehicle original stock bumper reusing the factory mounting points..
Check Stock

EAG Steel EZ Grip Rear Bumper with Secure Lock Tire Carrier Fit for 87-06 Wrangler TJ YJ

  • FITMENT - Fit for 1987-2006 Wrangler YJ TJ..
  • EZ Grip LATCH HANDLE - The EAG patent pending EZ Grip latch handle engineered to be user friendly. The latch easily opens and closes with the ease of....
  • D-RING SHACKLES AND HITCH RECEIVER - The solid D-ring mounts are welded on both inside and outside. Two 4.75 ton D-Ring shackles and black isolators....
  • SWING OUT TIRE CARRIER - Two-way adjustable tire mount for rear tire carrier can accommodate oversized tires..
  • CONSTRUCTION - Manufactured from durable 5/32" steel sheet. Durable textured black powder coat finish..
Check Stock

EAG Classic Rear Bumper with Tire Carrier and Hitch Receiver Fit for 87-06 Wrangler TJ YJ

  • FITMENT - Fit for 1987-2006 Wrangler TJ YJ..
  • ALUMINUM HANDLE - Solid billet aluminum handle with built-in cam lock is used for rear tire carrier release. Adjustable tire mount for rear tire....
  • HEAVY DUTY CONSTRUCTION - Manufactured from durable 5/32" steel sheet. This off-road rock crawler rear bumper is completed in a two stage finish using....
  • D-RING SHACKLES AND HITCH RECEIVER - The solid D-ring mounts are welded on both inside and outside. Two 4.75 ton D-Ring shackles and black isolators....
  • INSTALLATION - No cutting and no drilling required. Assured high quality and dependability. Some application may require the license plate to be....
Check Stock

EAG XJ Steel Front Bumper with Winch Plate & D-rings Fit for 84-01 Cherokee XJ / 84-01 Comanche MJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 84-01 Comanche MJ.
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2 " x 0.120 wall steel....
  • PRE-RUNNER HOOP - Integrated pre-runner hoop provides real protection for your XJ. Two tabs on grille guard for mounting extra lights..
  • D-RING SHACKLES - High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • INSTALLATION - Easy bolt-on installation. Only 1996 and earlier require factory fender trimming..
Check Stock

WARN 100770 Winch Accessory: Epic Sidewinder, Black

  • Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
  • Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
  • Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
  • Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
  • Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.
Check Stock

WARN 100635 Winch Accessory Epic Sidewinder Gunmetal

  • Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
  • Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
  • Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
  • Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
  • Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.
Check Stock

TGL 3 inch, 8 Foot Tree Saver, Tow Strap with D Ring Shackle and 10 Ton Snatch Block

  • 3 inch wide, 8 foot long heavy duty winch strap, tree saver, tow strap with 30,000 pound capacity..
  • 10 ton snatch block doubles the capacity of your winch or redirects pull position..
  • D-ring shackles are 3/4 inch diameter body, 7/8 inch diameter pin..
  • D-ring shackles are CE certified for 4.75 ton WLL (Working Load Limit)..
Check Stock

EAG Front Bumper with LED Lights and Winch Plate Fit 84-01 Cherokee XJ / 84-01 Comanche MJ.

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 1984-2001 Comanche MJ..
  • INTERCHANGEABLE LIGHT SURROUNDS - EAG patent pending metallic gray ABS light surrounds included. Only 96 and earlier require factory fender trimming..
  • PRE-RUNNER HOOP - Integrated pre-runner hoop provides real protection for your XJ. Two tabs on grille guard for mounting extra lights. Two 12W LED lights included..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
Check Stock

EAG Full Width Front Bumper with LED Lights and Light Frames Fit for 76-86 Wrangler CJ

  • LED LIGHT AND LIGHT SURROUNDS - Two 12W LED lights included.EAG patent metallic gray ABS light surrounds included. Direct bolt-on design for secure rattle free installation..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. NOTE: D-ring shackles are NOT included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • EASY INSTALLATION - EAG front bumper is engineered to be a direct bolt-on upgrade replacement for your wrangler original stock bumper reusing the factory mounting points. No cutting or modifications required..
Check Stock

EAG Stinger Stubby Front Bumper with Winch Plate Fit for 1984-2001 Cherokee XJ/Comanche MJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 1984-2001 Comanche MJ.
  • STINGER BAR - This rock crawler bumper's benefit is the bolt-on stinger bar, which will help to prevent your Cherokee from flipping forward when coming down off an obstacle during hardcore off-roading. And it provides excellent protection for the grilles..
  • CONSTRUCTION - Use of laser-cutting, CNC folding, and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • SIMPLE BOLT-ON INSTALLATION - EAG engineered this Cherokee stinger bumper to be a direct bolt-on replacement, no drilling or cutting required..
Check Stock