Tioyar Front Bumper w/Winch Plate + 5 LED Lights Fit 1984-2001 Cherokee XJ and Comanche MJ
- Fit 84-01 Cherokee XJ /1984-2001 Comanche MJ.
- Bumper uses 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tubes to make the bumper harder and more durable. The grade 3 textured black powder coating is corrosion resistant and durable..
- Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The front bumper contains a built-in winch plate that can support a 12,000-pound winch. inside and outside of the D-ring mount are mechanically welded to achieve maximum strength..
- Both the inside and outside of the D-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. It is also safer when off-road. The front bumper is equipped with 1x144W LED aluminum light + 2x20W LED aluminum lights + 2x18W LED aluminum lights..
- Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock
Hooke Road Wrangler JK Front Bumper + Rear Bumper Combo w/All LED Lights Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors
- Fitment - Hooke Road front & rear bumper combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors Sahara Rubicon Sport.
- Winch Plate & Hitch Receiver & D-rings - Two solid D-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength. 4.75 ton capacity D-rings (9500lb. rated) included. (Front Bumper) built-in winch plate for up to 12,000 lb. (winch not included). (Rear Bumper) built-in hitch receiver for up to 9500 lb..
- Heavy Duty Construction & Corrosion Resistance Finish - The bumpers are manufactured from durable 1/8" steel sheet and 1.9"X0.06" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
- Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included).
- Package Include - 1 x wrangler jk front bumper.
Check StockHooke Road Tundra Bumper Combo Full Width Front Bumper & Rear Step Bumper Compatible with Toyota Tundra Pickup Truck 2014 2015 2016 2017 2018 2019 2020 2021
- Rugged Off-Road Front Bumper and Rear Step Bumper Combo Compatible with Toyota Tundra 2014 2015 2016 2017 2018 2019 2020 2021 All Models, Bumpers don't have pre-drill holes for blind spot monitoring system and factory back-up sensors..
- Heavy duty 5/32" steel plate, texured black powder coat finish. Premium e-coating process for 5-year corrosion protection under normal use..
- Front bumper equipped with 2 d-rings and 2×18w high power LED floodlights. Rear bumper equipped with 2 d-rings and 2×18w high power LED spotlights..
- Easy bolt-on installation with clear and detailed instruction..
- Package contents: Front bumper and rear bumper assembly.
- front and rear d-rings and all showed LED lights.
Check StockHooke Road Wrangler TJ Bumper Combo Front + Rear Bumpers with D-Rings & Receiver Hitches Compatible with Jeep Wrangler TJ 1997-2006
- Hooke Road Front Bumper + Rear Bumper Kit Fit for Jeep Wrangler TJ 1997-2006.
- Two Stage Textured Black Powder Coat Finish.
- High Strength D-Ring Mounts w/ D-Rings Included.
- Front Bumper:D-Rings & 2x LED Accent Lights included.
- Built-in winch plate for up to 12,000lb. winch.
- 2 Year Hooke Road Manufacturer's Warranty & Life time customer support.
Check StockSmittybilt 76651D-01 SRC Classic Rear Bumper
- Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
- Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
- Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
- Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
- Easy to install without drilling or cutting. Follow the instructions to install!.
Check StockOCPTY Front and Rear Bumper with D-ring & LED Lights & Winch Plate fit for 2013-2018 for Dodge Ram 1500 (Front Bumper Not for Rebel)
- [Fit for]:2013 2014 2015 2016 2017 2018 for Dodge Ram 1500.
- [Winch Plate & D-Ring Shackles]:Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
- [Package Included]:1XFront Bumper,1XRear Bumper,Mounting Hardware as Shown.
- [Never Rusts]:Front and Rear Bumper have a high quality,Powder coated Black Finish and along with our advanced laser welding technology, prevents rust from occurring..
- [Bolt-On Installation]:The OCPTY bumper is engineered to be a direct bolt-on installation for your . As a direct fit replacement, this bumper requires no additional cutting, welding, or fabrication for installation..
Check StockHooke Road Cherokee XJ Metal Front Bumper and Rear Bumper Combo Compatible with Jeep Cherokee XJ 1984-2001
- FITMENT: Full Width Front and Rear Bumper Kit Compatible with Jeep Cherokee XJ 1984-2001 Models. Moderate installation needs minor cutting to install front bumper...
- DESIGN: The front bumper Integrated grille guard hoop provides superior protection..
- EXTEA LIGHTING: 2×18W LED spotlights and 2×18W LED floodlights included..
- CORROSION RESISTANCE: The bumpers were made of heavy duty 9-gauge(5/32 inch) steel. Textured black powder coat finished. Premium E-coating process for 5-year corrosion protection under normal use..
- FOR OFFROAD: Front bumper has built-in winch plate for up to 12000 lbs use. Rear bumper has 2" standard hitch receiver. Include 4 D-rings and D-Ring isolators..
Check StockHooke Road Tundra Rear Step Bumper Full Width Steel Bumper with D-Rings for 2007 2008 2009 2010 2011 2012 2013 Tundra Pickup Truck
- FITMENT: Rear Step Bumper for 2007 2008 2009 2010 2011 2012 2013 Tundra Models. Simple bolt-on installation, no cutting or drilling required. Not compatible with factory back-up sensors..
- DESIGN: Rugged styling and full protection bumper. Retains factory receiver hitch. Equipped with led lights for extra lighting. Include mounting holes for licence plate..
- CONSTRUCTION: Heavy-duty, high tensile 11 gauge (1/8 inch) & 10 gauge(9/64 inch) steel..
- CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
- 2 D-rings (9500 lbs rated, D-rings w/ rubber rings).
- Installation instruction. (Bumper weight: about 80 lbs)..
Check StockTioyar Front Bumper + Rear Bumper with Winch Plate & LED Lights & 2 Hitch Receiver Kit for 97-06 Wrangler TJ Textured Black
- Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
- Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
- Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
- Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
- Easy to install without drilling or cutting. Follow the instructions to install!.
Check StockHooke Road Mad Max Front Bumper Grill w/ 2X 18W LED Lights for 2018-2022 Jeep Wrangler JL & Gladiator JT
- FITMENT: For 2018-2022 Jeep Wrangler JL and 2020-2022 Gladiator JT Models. Simple bolt-on installation. Bumper weight about 88 lbs..
- DESIGN: One-piece grill structure integrated increases structural strength. Contradiction space exterior design style, possess aesthetics exterior,....
- 2 STAGE FINISH: Texture black coated finish on the surface, premium E-coating process interior for 5-year corrosion protection..
- D-rings (9500 lbs rated, d-rings w/ rubber rings).
- Stubby front bumper provides greater tire clearance.Decorated w/ vivid Red "since 1941" pattern in two sides..
Check StockRam 1500 Bumpers Kit Front & Rear Bumpers Textured Black Steel w/ D-Rings & LED Lights Compatible with Dodge Ram 1500 2013-2018 Pickup Trucks (Excluding Rebel)
- 【FITMENT】CROWMT 4×4 Front Rear bumper Replacement for Ram 1500 (2013 2014 2015 2016 2017 2018) Pickup Trucks (Excluding Rebel), Not compatible with OE sensor & factory back-up sensors.
- 【FRONT BUMPER DESIGN】Front bumper w/4×18w LED Spotlight & D-rings, Winch plate – rated up to 12,000 pounds.
- 【REAR BUMPER DESIGN】Rear bumper w/2 ×18W LED Floodlights & 2×3/4” D-Rings, Rated 9500 lbs.
- 【MATERIAL】Textured Black Powder Coat Finish.
- Premium E-coating process for 5-year corrosion protection under normal use.
- 【INSTALLATION】Easy bolt-on installation, Come with Hardware & Detailed instruction.
- 2-Year Manufacturer’s Warranty & Lifetime Customer Support.
Check StockSingle Left or Right Jounce Bumper Bump Stop Cup Compatible with Wrangler TJ Grand Cherokee ZJ
- FITMENT - Compatible with 1984-2001 Cherokee XJ.
- CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat....
- D-RING SHACKLES - High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolators included..
- RECEIVER HITCH - 2" standard Class 3 rated receiver hitch with safety chain loop..
- EASY INSTALLATION - EAG rear bumper is engineered to be a direct bolt-on upgrade replacement for your car's original stock bumper reusing the factory....
Check StockHooke Road Tacoma Rear Back Steel Bumper w/2 ×18W LED Floodlights & D-Rings Compatible with Toyota Tacoma 2016 2017 2018 2019 2020 2021 2022 Pickup Truck
- FITMENT: Solid Steel Rear Bumper Fits for 2016 2017 2018 2019 2020 2021 2022 Tacoma Models. Directly bolt-on installation, no cutting or driling required. Work with factory towing hitch.
- DESIGN: Rugged styling and full protection rear bumper. Equipped with led lights for extra lighting. Not compatible with factory back-up sensors. Include mounting holes for licence plate.Pre-formed cut-outs to accommodate factory license plate lights..
- CONSTRUCTION: Heavy-duty, high tensile 10 gauge (9/64 inch) & 8 gauge(11/64 inch) steel construction..
- CORROSION RESISTANCE: Texured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
- 2 D-rings (9500 lbs rated, d-rings w/ rubber rings).
- Installation instruction. (Bumper weight: about 76 lbs)..
Check Stock
