Reviews Cut off Cutting Cutter
Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)
- ...e, and when installing or making repairs on catalytic converters.
- Keep well oiled, not for use on stainless steel.
- EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
- Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
- EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
- NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
- Work in cramped spaces with one-handed rotation.
- The cushion grip handles ease pressure on your hand while you increase your grip.
- BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
- The head of the exhaust cutting tool won’t bend from during rotation.
Check StockHit Tools 22-ICC27 1-1/16-Inch Impact Wire Rope/Cable Cutter - Sold by Ucostore Only
- ♛ Powerful Tool ------ Excellent tool for cutting stainless steel wire rope. This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut..
- ♛ High Quality ------ Steel Cable Cutter Cuts up to 5/32"" stainless steel cable. It features hardened steel blades, thumb catch designed for one-handed operation, and contoured cushion rubber handle non-slip grips..
- ♛ Easy Cutting the Cable ------ This cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal. This cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
- ♛ MULTI USAGE ------ Heavy duty steel wire rope cable cutter CUTS UP TO 5/32” stainless steel cable. This cable cutter is a perfect tool for cutting cable, wire rope, ripcords..
- ♛ WHAT YOU GET ------ In this kit, You will get 1Pcs Excellent Cable Cutter tool for cutting stainless steel wire rope. Precise without frayi....
Check StockPVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle
- 【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
- 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
- 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
- Cushioned for comfort and non-slip security.
- 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.
Check StockOEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter
- CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
- Keep well oiled, not for use on stainless steel.
- EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
- Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
- EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
- NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
- Work in cramped spaces with one-handed rotation.
- The cushion grip handles ease pressure on your hand while you increase your grip.
- BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
- The head of the exhaust cutting tool won’t bend from during rotation.
- Lightly lubricate cutting wheels before use.
Check StockMilwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack
- CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
- EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
- EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
- Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
- NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
- Work in cramped spaces with one-handed....
- BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
- The head of the exhaust cutting tool won’t bend from....
Check Stock8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car
- 【APPLICATION】The exhaust tail pipe cutter is designed for cutting tailpipes and exhaust pipes both on and off vehicle use. Use tool to cut copper, PVC, iron pipe, etc with diameters of 3/4 to 3 inches (19-76mm).
- 【HIGH QUALITY】The chain muffler pipe cutter is made of high quality carbon steel, the surface has been anti-rust treatment and strict testing methods, strong , sturdy and durable, not easy to damage.The ergonomically non-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
- 【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
- 【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
- 【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the proces....
Check StockLittle ELF The Original Gift Wrap Cutter (2-Pack) | As seen on Shark Tank | Holiday Wrapping Paper Cutter
- Gift Wrapping Made Fun and Easy! - As Seen on Shark Tank, Little ELF Gift Wrap Cutter has revolutionized the gift wrap industry by making it easier for people to cut wrapping paper. Little ELF is a patent-pending device that is the most efficient, safe, and easy tool for cutting wrapping paper..
- Easy and Safe - Little ELF Gift Wrap Cutter is designed specifically for easy and safe use. The cutting tool keeps users safe with a durable embedded steel blade. The cutter is also made from high-quality, smooth, and long lasting plastic. Made in the USA, the device fits around rolls that are 2.25 inch or smaller in diameter. The sliding cutter is also a great tool for cutting vinyl for craft projects, bulletin board paper, and other rolled papers..
- Slice with perfection - Gift wrap cutting has always been a challenge with scissors! Scissors often rip, tear, and ruin the wrapping paper. Stop wasting paper and money! Getting the perfect cut is now incredibly easy with Little ELF. Get a straight, clean, and smooth cut every time. Little ELF is designed to make cross cuts as well, so it is perfect for trimming sheets..
- Revolutionary - The traditional and outdated method of cutting with scissors always leaves the paper either jagged, ripped, or crooked. Now, ....
Check StockSogYupk Ratchet Cable Cutter,Manual Mechanical Heavy Duty Copper Aluminum Ratchet Wire Cutting, one of the Electrician's Tools (Ratchet Cable Wire Cutter Can Cut Wire Up to 240mm²).
- 【Notes for Use】The ratchet cable wire cutter is not suitable for cutting steel rubber wire/steel rope/hard iron wire. When repairing an energized circuit, for safety, the cable must be cut off after the power is turned off..
- 【Cable Cutting】Manual ratchet cable wire cutting shears can be used to cut aluminum and copper cables, and can also be used for communication cables/single-strand cables/multi-strand cables, etc. The handle is designed with non-slip/wear-resistance, which is comfortable to hold and makes your every time It's all a pleasure to cut..
- 【Cutting range】The cutting range of the cable cutter is 240mm², which can quickly help you to complete the cutting, and the cutting edge is flat. (Copper cable ≤ 300 MCM, aluminum cable ≤ 600 MCM)..
- 【Ratchet Design】The special design of the ratchet makes the cutting position not misaligned when the ratchet slips. Open the release lever, and as your hand applies force to the handle of the cable wire cutter, the ratchet starts to drive until the cut is complete..
- 【After-sale service】Cable shear model: HS-325A. If you have any dissatisfaction with the product you received, please contact me, SogYupk will be responsible for the problem of the product, and I will provide you with a sati....
Check StockExhaust Pipe Cutter Tool and Exhaust Hanger Removal Pliers for Cutting and Disassembly of Exhaust Piping Systems
- Exhaust pipe cutter tool features pipe cutter chain w/ cutting wheels, exhaust pipe cutter w/ cushion grips, can be used as PVC cutter or copper pipe cutter. Replacement for exhaust pipe cutter chain, tailpipe cutter, tail pipe cutter, chain tail pipe cutter..
- The exhaust pipe cutter can cut the exhaust pipe cleanly, reducing burr or burr.
- Cut off the exhaust pipe on or off the car to facilitate repair or installation of a catalytic converter. Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
- Exhaust hanger removal plier separates the rubber supports from exhaust hanger brackets, works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
- Exhaust hanger removal plier has anti skid handle for easier use. You only need to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
- Exhaust pipe cutter tool and exhaust hanger removal plier are the best combination and can easily he....
Check StockZoostliss Stainless Steel Wire Rope Aircraft Bicycle Cable Cutter, Up to 5/32\ Diameter
- This cable cutter is designed for cutting steel wire which up to 5/32”, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut.Stainless Steel Wire Rope Aircraft Bicycle Cable Cutter, Up To 5/32" edge induction hardening is more comfortable..
- Knife edge by a special heat treatment, cutting fast formation without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
- Labor-saving spring roll design, One-Handed Operation, easy operation, this cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal..
- Using SK5 high carbon steel Seiko forging, durable, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do..
- If you do not like our products, we accept 30 days return, replacement and refund(Full&Partial).
Check StockAMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16' 1/8' 3/16' 1/4' Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter
- STEEL CABLE RAILING FITTINGS – This hand swager crimper is perfect for crimping the stainless steel fittings of cable railings and boat rigging..
- Provides 8 US tons of crimping force for use with swaging 1/16″~1/4″ inch fittings onto 1/16″~1/4″ wire rope cable,.
- This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8” 7×7 assemble coated steel security cable it still very sharp and clean cut.
Check StockCynaMed Finger Ring Cutter Emergency Rescue Surgical First Aid EMT EMS Paramedic Jewelers
- SAFE & COMFORTABLE OPERATION: With an extra-large twisting thumb, Cynamed Deluxe Finger Ring Cutter creates more leverage for the user to cut with minimal effort..
- PREMIUM-GRADE QUALITY: The stainless-steel is premium quality and can quickly and safely remove rings from fingers. It has a safety lever that protects the finger from the cutting blade..
- EXCEPTIONAL DESIGN: The ring cutter features a chrome-plated handle, a large thumb screw, and an extra-large stainless- steel blade. The premium design ensures an easier cut through stronger materials such as gold, silver, brass, and almost any other metal..
- EASY TO USE: Utilizing this tool is easy. Apply slight pressure by squeezing the pliers’ handle gently and simply rotate the thumbwheel which operates the cutting action of the blade. Keep turning the shank till the ring is cut. The Cynamed Finger Ring Cutter comes with a blade that is mounted on the tool..
- HIGHLY VERSATILE: The Surgical Finger Ring Cutter is ideal for cutting the ring or band safely off of a finger. It is used by many professionals such as doctors, paramedics, EMS and EMT professionals, emergency rooms, law enforcement agencies, and more..
Check StockTailpipe Cutter 3/4 to 3 Inch, Carbon Steel Chain Exhaust Pipe Cutter Tool, Tube Cutting Pliers for Cutting Exhaust Pipe Copper Pipes
- Easy Cutting: Use our exhaust tube chain cutter to quickly achieve cutting exhaust pipes, the cutting diameter of the product ranges from 3/4" to 3" (19-76mm), and can cut thin wall pipes up to 2.5mm thick.
- Unique Design: The tail pipe cutter adopts an adjustable chain lock design, the chain length is 30cm. The riveting process makes our tube cutting pliers not easy to loosen and deform. Fine-tuning screws are designed at the rear of the product to ensure that the cutter is in close contact with the pipe.
- High-Quality Material: The exhaust tail pipe cutter is made of high-hardness carbon steel material, which is durable, corrosion-resistant, and effectively prolongs the use time of the product. Comfortable coated handle on the surface, safe and non-slip, relieve your hand pressure.
- Wide Range of Applications: Our tailpipe cutter are very suitable for cutting exhaust pipes, plastic pipes, low carbon steel pipes, copper pipes, etc. They can be used without electricity. They are very suitable for you to use outdoors and help you solve the difficult problem of cutting pipes outdoors.
- Easy to Carry: The exhaust cut off tool is moderate in size, can enter a narrow space for work, and is easy to carry and store, greatly saving your storage space.
Check Stock