Reviews Copper Thread Fittings
PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs
- PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
- Easy to install:connecting by the outer thread of the quick fitting.
- Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check StockExchilerator Basic - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counterflow Wort Chiller - Great Home Brewers Gift
- EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
- USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the ExChilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photos).
- COMES READY for you to apply 1/2 Inch National Pipe Thread fittings of your choice..
- 5 GALLONS 5MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
- COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check StockDOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
- 【PREMIUM MATERIAL】:Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
- 【TYPICAL APPLICATION】:The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
- 【EASY TO INSTALL】:Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
- 【MAX PRESSURE】:Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F(-40°C to +93°C)(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
- 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check StockTAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 3/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N3(Pack of 2)
- 【Product Name】 Straight Push to Connect Fittings Air Fittings.
- 【Size】1/4" Tube OD x 3/8" Female NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
- 【Maximum Pressure】0~145Psi【Working Temperature】32~140°F.
- 【Features】Control pipeline connection or disconnection..
Check StockTAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N1(Pack of 10)
- 【Product Name】Straight Push to Connect Fittings Air Fittings.
- 【Size】1/4" Tube OD x 1/8" Female NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
- 【Maximum Pressure】0~145Psi【Working Temperature】32~140°F.
- 【Features】Control pipeline connection or disconnection..
Check StockLUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament
- PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
- PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
- Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
- Attention - small 3D printer accessories, please keep away from children.
Check StockMMC77 Copper Base Anti-Seize Lubricant Compound 2100°F (8oz)
- BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
- Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
- Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
- Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
- Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.
Check StockBCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black
- PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
- Teflon tubes are made of premium PTFE material, unique....
- Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
- Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
- Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
- Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check StockUniversal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring
- Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
- Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
- Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance,this is one of the needed items to have in your parts kit..
- Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
- Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..
Check StockMUYI 10 Pcs 5mm Male Thread 0.16 Push to Connect PC4-M5 for PTFE Tube 3D Printer Connector
- Item Name: Quick Fittings. Model: PC4-M5..
- Material: Copper, Plastic. Color: Brass, Blue..
- Thread Diameter: 5mm. Inner Diameter (Blue End): 4mm..
- Total Size (Each): 19.8 x 10mm . Weight: 50g..
- Package Content: 10 x PC4-M5 Quick Fittings. 10 x Black Rubber Seal..
Check StockRectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant
- RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
- Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
- Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
- Ideal for application with a wide variety of fluids and gases including potable water applications.
- Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check StockCNAODUN 10 Pcs Push-to-Connect Fittings 3/8 Inch Tube OD x 1/4 Inch NPT Thread Pneumatic Male Elbow Quick Connect Air line fittings…
- ♥【What You Get】3/8" Od x 1/4" NPT Thread Push to Connect Fittings,10pcs in total.Body Style: Male Elbow.
- ♥【High Quality】These air fittings are made of high quality plastic and copper ,are widely used for automatic industry, workshop equipment, auto repair ,decoration spray paint, woodworking, dental equipment, etc..
- ♥【Working Parameters】Working Pressure:0~145psi.
- ♥【Wide Range of Applicable Tubes】These fittings can be used for a wide range of pipes, and can be used for PU / PA / PE / PVC pipes..
- ♥【Easy Application】Plug-in design, easy installation, clear threads, strong sealing..
Check StockAnti Seize Spray Lubricant | Copper | Thread Compound | Bolt Grease | Automotive | Sieze | Lube | Never Cease Temp | Spark Plug | Paste | Antisieze | Neversieze | 12 OZ Aerosol Can | BustApart
- BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
- Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
- Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
- Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
- Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.
Check Stock