Reviews G Thread Fittings

1/8\ PT Male Thread 6mm Push in Joint Pneumatic Connector Quick Fittings 12 Pcs Ted Lele (6mm 1/8)

  • Total Size(Each) : 19.5x 13mm/ 0.76" x 0.51" (L*W).
Check Stock

275 330 G IBC Tote Fittings Tank Water Tank Connector 2 Inch Fitting Adapter IBC Tonnage Connection Joint and 3/4 Inch Coarse Thread(2)

  • Package included: you will get 2 pieces of IBC fittings tanks, sufficient quantity can meet your daily needs and replacement, which is easy to connect tons of hose or hard pipe.
  • In addition, each joint is equipped with a LDPE gasket.
  • Note: IBC fittings tank is coarse thread.
  • Appropriate size: our product is suitable for standard IBC containers with an inner diameter of 6 cm/ 2 inches and a thread pitch of 0.4 cm/ 0.15 inches.
  • It provides a foundation for garden hoses and can extend the service life of existing valves.
  • Note: Please check the size carefully before buying.
  • Not easy to leak: 275 330 G IBC tote bag drain connector provides a stable and leak-proof connection. The tote bag water tank connector has gasket seals to prevent leakage. You can use it with confidence (Note: Before use, please check if there is LDPE gasket to avoid Water leakage. If there is water leakage, you can use sealant tape to stabilize the leaking part).
  • Quality materials: 275 330 G IBC tote fittings tank is made of quality plastic materials, which can withstand irritating chemicals and acidic water more than brass, and this durable material can ensure long-term safe use and is suitable for drinking water.
  • Convenient installation: tote fittings tank is suitable for fast connect....
Check Stock

uxcell Air Pneumatic Tube 4mm Push in Connector Fittings 5 Pcs

  • Total Size : 19 x 10mm/ 0.75" x 0.39"(L*W).
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

Quickun 1\ ABS Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting (Set of 2)

  • 【Size Information】: The double threaded bulkhead fittings are 1 inch G male and 1 inch G female thread(Bulkhead OD: 44.6mm)..
  • 【Included】2Pcs bulkhead adapter and 2Pcs plugs..
  • 【Durable】:Material:ABS.This bulkhead fittings will not fade, crack, or peel..
  • 【Easy to Use】:Drill a 44.6mm hole for installation, then assemble the ABS bulkhead and hose adaptor together.
  • 【Function】:Can be mounted in walls, tanks, or panels. Bulkhead design to make the fitting easy through holes..
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

Foster 3 Series - Steel Plugs 10pc, 1/4\ Body, 1/4\ NPT - Industrial Interchange, I/M, MIL Spec,

  • Total Size(Each) : 23.5 x 13.4mm/ 0.9" x 0.4" (L*W).
Check Stock

MUYI 10 Pcs 5mm Male Thread 0.16 Push to Connect PC4-M5 for PTFE Tube 3D Printer Connector

  • Item Name: Quick Fittings. Model: PC4-M5..
  • Material: Copper, Plastic. Color: Brass, Blue..
  • Thread Diameter: 5mm. Inner Diameter (Blue End): 4mm..
  • Total Size (Each): 19.8 x 10mm . Weight: 50g..
  • Package Content: 10 x PC4-M5 Quick Fittings. 10 x Black Rubber Seal..
Check Stock

SIQUK 5 Pieces Teflon Tube PTFE Tubing (1M) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Fitting Connector for 3D Printer 1.75mm Filament

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

PC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs

  • PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
  • Easy to install:connecting by the outer thread of the quick fitting.
  • Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock

uxcell Brass Exhaust Muffler, G3/8 Male Thread 45/64\ Hex Sintered Air Pneumatic Bronze Muffler with Brass Body Protruding 5pcs

  • Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
  • These compact and inexpensive mufflers are easy to install and maintain, particularly suitable where space is limited..
  • They are used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise requirements..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock