Reviews Copper Solder

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • ...ful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small a....
Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering (32 oz.)

  • Nokorode regular paste solder flux lead free, 8 oz.
  • Recroseal's nokorode regular paste solder flux 8Oz.
  • Cleans and fluxes in one operation saving time and money.
  • Special oil base protects the solder joint against corrosive attack.
  • It's non-aggressive formula is ideal when used on copper and brass fittings.
  • Lead free and acid free-safe to use on potable water systems.
  • When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint.
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • ...dering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
  • 【Widely used Solder Remover】:The Desoldering Wick & Desoldering Pump can be used to correct mistakes with....
Check Stock

SFC TOOLS Standard Jewelry Soldering Kit with Silver Solder Wire Kit-1750

  • Kit Includes: Mini Butane Torch, Sparex Pickle Compound.
  • Handy Flux, Magnesia Soldering Block, Copper Tongs with Curved Tip,.
  • Silver Solder Wire - Easy, Medium and Hard,.
  • Tweezers - Boley Style, Third Hand w/Tweezers, Tripod with Mesh Screen,.
  • Eco Solder Pick, Wire Cutter (Style and PVC color may vary), Utility Flux BrushDescriptionWe put this soldering kit together with all the tools and supplies you will need to start soldering, whether you are a beginner, taking a class, or are setting up your studio. You will be able to immediately solder sterling silver, fine silver, PMC3, nickle silver, copper, brass, and bronze. These soldering tools are all you need to perform small soldering tasks for jewelry making and repairs, tasks such as balling headpins, soldering chain ends, pin backs and bails, soldering jump rings closed and so much more. We recommend starting with 16-22 gauge sheet and wire if you're a beginner. Butane is not included and will need to be purchased separately. Kit includes: SFC Tools Micro Torch - Handheld Butane Torch, Silver Solder Wire 20 gauge - 1 foot each of easy, medium, and hard, Sparex Pickle Compound - 10 oz jar, Handy Flux - 8 oz. jar, Magnesia Soldering Block, Copper Tongs, Precision Tweezer - AA Fine Tip, Third Hand with Cr....
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • ...e size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.
Check Stock

EASTMAN Sterling Lead Free Solder, Silver, 85325 EASX1, 1 Count (Pack of 1)

  • PLUMBING SOLDER: Pipe soldering is ideal for sealing, joining, coating, and filling metals.
  • COMPATIBILITY: Solder wire is perfect for use on brass, bronze, copper, galvanized iron, monel, steel, stainless steel and all other solderable alloys that require maximum reliability of solder joints.
  • VERSATILITY: Designed for safe use in potable water applications for plumbing, heating, and industrial applications.
  • DURABLE: The Flo Safe lead free solder metal is alloyed from pure virgin metals.
  • meets all state and federal specifications for Safe Drinking Water Act, and meets ASTM B-32 alloy TC specification.
  • MELTING POINT: Pipe solder features a maximim temperature before melting of 410 degrees.
Check Stock

Stained Glass Supplies Solder for Stained Glass Solder 1 Lb Spool and 2 Rolls Electrical Conductive Copper Tape 1/4 Inch for Paper Circuits Jewelry Repairs

  • ...ke is normal, please use in a ventilated place.
  • Stable and reliable: solder plate material ratio is reasonable, uniform melting point, good fluidity, can present a regular smooth appearance. The melting temperature is 361-421 degrees Fahrenheit. Note: to ensure the welding effect, please wrap the edges of glass with copper foil first.
  • Good adhesive: the stained glass copper foil tape has nice adhesion to a variety of surfaces, resulting in a smooth surface, which also has an easy-to-peel backing for long-term use.
  • Please be careful and wear appropriate gloves during the wrapping process of glass and other material with pointed edges to avoid scratches.
  • DIY exquisite crafts: this set of electrical conductive tape and solder can meet various needs of glass handicraft makers.
  • The copper tape 1/4 inch allows you to draw fine lines and get smooth glass pieces, and soldering wire for stained glass can make your glass pieces firmly welded together, to assist you in the smooth production of delicate crafts.
  • Practical combinations: the combinations of copper craft supplies are not only suitable for glass crafting enthusiasts, but also can be applied for other electronic products for welding and repair work, which can withstand the different environment both indoo....
Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
  • 3.0mm,1.5m), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
  • width: 2.5mm), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • ... size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and efficiency to your work.
Check Stock