Reviews Connecting Rod Cap

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

Small Block Fits Chevy 5.7 H-Beam Connecting Rods, 4340 Steel, 7/16

  • Precision bolt bushing allows to easily locate cap.
Check Stock

Koauto Connecting Rod 2351025240 for Tucson Sonata Optima Rondo Sportage 2.4L 2006-2010

  • Precision bolt bushing allows to easily locate cap.
Check Stock

Gallowsbirds Park

  • 11,000 BTU heat input heats up to 375 sq. ft..
  • Designed for use with liquid propane gas.
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock

2 Pcs Piston Ring Oil-Less AB-9040019 For Husky Bostitch Air Compressor CAP2000P CAP2040P CAP1512 CAP60PB CAP60P

  • Fits Models: H27508UWK / A600006. Does NOT fit the "WL" or other series units. Part Numbers: AB-9040019, AB9040019.
  • 40mm ID. This is for the 50mm Cylinder Bore..
  • This part is installed on top of the piston/connecting rod.Its purpose is to create a seal in the cylinder so that air can be pump into the compressor tank..
  • If this part wears your compressor will not pump the air properly.This is a wear part and it is advised to keep an extra one on hand..
  • This part is compatible with the following machines: Bostitch CAP2000P-OF Type 0 Air Compressor CAP2040P-OF Air Compressor CAP60P-OF Air Compressor CAP60PB-OF Air Compressor CAP1512-OF (Type 0) Air Compressor.
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

Auto Express Honda GX390 13 HP Short Block Engine Crank Shaft Camshaft Crankcase New

  • Includes: Engine Block with Piston and rings, Piston Pin, Connecting Rod, Crankshaft, Crank Seals, Crankcase Cover, Camshaft Balancer, Shaft, Low Oil Sensor, Governor, Oil Dipstick/Fill Cap.
Check Stock

Ashley Hearth Products DVAG17L 17,000 BTU Direct Vent Propane Heater, Cream

  • 17,000 BTU heat input heats up to 570 sq. ft..
  • Designed for use with liquid propane gas.
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock

Ashley Hearth Products DVAG30L 25000 BTU Direct Vent Propane Heater, Cream

  • Heats up to 825 sq. ft. with up to 25,000 BTU heat input.
  • Designed for use with liquid propane gas.
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

Ashley Hearth Products DVAG17N 17,000 BTU Direct Vent Natural Gas Heater, Cream

  • 17,000 BTU heat input heats up to 570 sq. ft..
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock

Ashley Hearth Products DVAG30N 25000 BTU Direct Vent Natural Gas Heater, Cream

  • Heats up to 825 sq. ft. with up to 25,000 BTU heat input.
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock

Ashley Hearth DVAG11N 11,000 BTU Direct Vent Natural Gas Heater, Cream

  • 11,000 BTU heat input heats up to 375 sq. ft..
  • Sealed burn system is perfect for bedrooms and living spaces.
  • Matchless Piezo lighting for quick starts.
  • No complicated venting to purchase or install, complete kit is included (includes heat shield, vent pipe, air intake pipe, flashing, cap and connecting rod).
  • Approved for use in mobile or modular homes.
Check Stock