Reviews Connecting Rod Crankshaft

Traxxas 5409 TRX 3.3 Engine Multi-Shaft with Recoil Starter

  • Multi-Shaft allows installation in non-Traxxas vehicles requiring different flywheel offsets.
  • Lightweight reciprocating assembly allows higher revving performance and reduced parts stress.
  • Knife-edged connecting rod reduces drag and turbulence while the channeled design directs oil flow down to the crankshaft.
  • Slide type carburetor provides less restrictive, straight through airflow for more power and improved throttle response.
  • Giant Power tune machined aluminum cooling head promotes even heat distribution for stable engine temps and rock-solid tuning consistency.
Check Stock

CNS Main Rod Bearing Kit Compatible/Replacement for BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54

  • COMPATIBLE WITH: BMW E34 E36 E46 E53 E83 E60 E39 M50 M52 M54.
Check Stock

Crankshaft, 69mm, Forged Chromoly, 8 Dowel, VW Journals, Compatible with Dune Buggy

  • Complete crankshaft, Connecting rods, Wrist pin bearings, Main bearings and seals sold separately for single-cylinder crankshaft.
  • Fits: Ranger 570 Crew EPS Full-Size 2015, 570 Crew Full-Size 2015, 570 EPS Full-Size 2015, 570 Full-Size 2015-2018, 570-6 Crew 2016-2017, Crew 570-6 2018, RZR 570 2012..
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

2340L5-V 5hp 60 gal Two-Stage Compressor (200/3)

  • Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
  • Maximum Power and Flexibilty: 100% continuous duty, 5 hp 2-stage air compressor, 175 psig maximum operating pressure and a 60 ASME reciever tank provide plenty of punch for the most demanding applications.
  • Easy to Service: Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
  • Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.
Check Stock

2475N7.5-V 7.5hp 80 gal Two-Stage Compressor (230/3)

  • Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
  • Maximum Power and Flexibility: 100% continuous duty, 5 or 7.5 hp two-stage air compressor, 175 psig maximum operating pressure and an 80-gallon ASME receiver tank provide plenty of punch for the most demanding applications.
  • Easy to Service:  Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
  • Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.
Check Stock

2475N7.5-P 7.5hp 80 gal Two-Stage Compressor (230/1)

  • Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
  • Maximum Power and Flexibility: 100% continuous duty, 5 or 7.5 hp two-stage air compressor, 175 psig maximum operating pressure and an 80-gallon ASME receiver tank provide plenty of punch for the most demanding applications.
  • Easy to Service:  Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
  • Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.
Check Stock

Ingersoll-Rand 2340L5-V 5hp 60 gal Two-Stage Compressor (230/3)

  • Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
  • Maximum Power and Flexibilty: 100% continuous duty, 5 hp 2-stage air compressor, 175 psig maximum operating pressure and a 60 ASME reciever tank provide plenty of punch for the most demanding applications.
  • Easy to Service: Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
  • Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.
Check Stock

Genuine OEM Lexus Toyota 04152-Yzza1 Oil Filters + Drain Plug Gaskets - Set Of 5

  • Material: Oil Filter is a microporous filter paper treated with high-quality resin, Oil Drain Plug Gaskets Made of High Quality & Durable Material..
  • Oil Drain Plug Gaskets Specification: 12mm Inside Diameter X 21mm Outside Diameter X 1.78mm Thick, quality replacement crush washers designed for a solid seal.
  • Function of the oil filter is to filter out harmful impurities in the oil from the oil pan, and supply the crankshaft, connecting rod, camshaft, supercharger, piston ring, and other motion pairs with clean oil to provide lubrication, cooling, Cleaning effect, thereby extending the life of these parts..
  • Oil Filter Manufacturer Part Number: 04152-YZZA1, 04152-31090.
  • Oil Drain Plug Gaskets REPLACES PART # 90430-12031 90430-12028 095-156 65394.
  • Fitment: Replace Oil Filter and Oil Drain Plug Gaskets of Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h.
Check Stock

King \XP\ Racing Performance Main Rod Engine Bearing Set Compatible with 02 - 14 Acura / Honda 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24

  • COMPATIBLE WITH: 02 - 14 ACURA / HONDA 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24.
  • 1 KING RACING [XP] SERIES Crankshaft Main Bearing Set (Standard Size).
  • 1 KING RACING [XP] SERIES Connecting Rod Bearing Set (Standard Size).
  • 1 KING Thrust Washer Set (Standard Size).
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included

  • LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included.
  • Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior.
  • Works with 2 – 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4″ Shaft. Tecumseh Engines 2-6.5 HP with 3/4″ Shaft.
  • Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
  • Package included: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 1 x Clutch Bolt, 1 x Washer Kit, 1 x wrench and 1 x Connecting Link.
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

150cc 4-Stroke GY6 Single CylinderMotor Long Case Engine for Scooter ATV Go Kart Engine CVT Auto Clutch Motor Bike with Kick Start Lever Carburetor CDI Starter Solenoid Coil

  • 【Features】Engine Type: GY6 Single Cylinder 4-Stroke. Engine oil type: SF15W-40 not come with oil. Cooling: Air Cooled .Displacement: 150cc.
  • 【High-flow Oil Pump】Reduces the wear of friction pairs and prolongs the engine service life..
  • 【Crank Shaft】 The engine is low speed with high torque and has large diameter bearings for crankshaft connecting rod, increasing the reliability of the bearings..
  • 【CVT】CVT consist mainly of 2 transmission pulleys and 2 transmission belts. It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • 【NOTE】 Installation Manual Is NOT Included Professional Installation Is Highly Recommended.
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • ...r working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wear of the friction pair.
  • 【Forced Air Cooling Engine】The outside of the cylinder is covered with metal fins, when the cooling fan blows air over the fins, the heat generated by the engine is directly released into the air. Cvt mainly consists of 2 drive pulleys and 2 drive belts, its compact and simple design allows seamless switching between an unlimited number of different gear ratios for smooth acceleration rates.
  • 【FITS】Compatible with 150cc Gy6 11" Long Box Engine Size scooters and vehicles, (Gy6 125cc and 150cc motors have different sizes, the difference is the length of the rear swingarm), 110cc-150cc Atvs and with Gy6 engine Karts are compatible with this item and also fit most 150cc vehicles made in China.
Check Stock