Reviews Connecting Fittings

NIBCO - K05540C C4807 2 HXH 90 ELBOW PVC, White, 2' (C48072)

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs

  • Hex bushing for connecting two pipes with different diameters.
  • 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

10-2 Plastic Triglides Slides

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

NIBCO C4806 2 HXH 45 ELBOW PVC White, 2 Inch

  • 45-degree elbow for connecting two pipes at an angle.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

NIBCO U4810 11/2 HXHXH 45 WYE PVC White, 1.5 Inch

  • Wye with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.Lead Free.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

PHITUODA 10Set Cabinet Furniture Connecting Cam Fitting with Dowel and Pre-Inserted Nut

  • 【Package Included】 10 Sets Furniture Connecting Fittings(10 x Cam Fittings + 10 x Dowels + 10 x Pre-Inserted Nuts).
  • 【Usage】Furniture Connecting Cam Fittings can be used for many types of furniture, cabinet, drawer, dresser and so on..
  • 【Dowels】Male thread diameter: 6 mm/0.23".
  • Length:40 mm/1.57",Made of high quality steel, durable and long-lasting..
  • 【Cam Fitting】12mm x 15mm/ 0.47" x 0.59"(Dia.*H),Made of zinc, strong rust resistance, exquisite workmanship, sturdy and durable..
  • 【Pre-Inserted Nut】6mm x 12mm/0.24" x 0.47"(Inner Dia.*H),made of high quality metal, adopting expansion principle for perfect locking effect..
Check Stock

NIBCO C4804 2 HXMIPT MALE ADAPTER PVC, White, 2' (C48042)

  • Adapter for connecting pipes or fittings of different types.
  • Hub opening on one end and male National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 406-020 PVC Pipe Fitting, 90 Degree Elbow, Schedule 40, White, 2' Socket (Pack of 5)

  • Elbow for connecting two pipes or fittings at a 90-degree angle.
  • Socket ends for connecting two unthreaded pipes or fittings.
  • PVC for chemical and corrosion resistance, strength, and light weight.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2466 standards for quality assurance.
Check Stock

Spears 829 Series PVC Pipe Fitting, Coupling, Schedule 80, 1-1/4" Socket

  • Coupling for connecting two pipes with the same diameter in a straight run.
  • Socket ends for connecting to male pipes or fittings.
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal.
  • Maximum operating temperature of 140 degrees F.
  • Meets ASTM D1784 and D2467 standards for quality assurance, and certified by NSF International for potable water service.
Check Stock

NIBCO - K09825CA C4811 2 HXHXH SANITARY TEE PVC, White, 2 Inch (C48112)

  • Tee with three openings for connecting and branching three pipes.
  • Hub ends for connecting to male unthreaded pipes or fittings.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

Spears 461 Series PVC Pipe Fitting, Adapter, Schedule 40, 2' NPT Male x 2' Spigot

  • Adapter for connecting pipes or fittings of different types.
  • Male NPT threads on one end and spigot connection on the other for connecting two pipes with different ends.
  • PVC for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance.
Check Stock