Reviews Conduit Raceway

Cable Tie Mount With Screw,50 Pack Saddle Type Zip Ties Holder,Black Wall Anchor For Wire Management,Electronic Cord Organizer Clip

  • WHAT YOU GET: 50 pcs 0.6*0.9" cable tie mounts, 50 pcs 6" cable ties, 50 pcs screws..
  • MUTI-USE: Perfect solution for home and Industrial wire organization,More suitable work for on the wood and gypsum board indoor or outdoor..
  • DURBLE MATERIAL: The material is heat resistant, good insulation, tough, and wear-resistant. Ensuring a cleaner and safer home and work environment..
  • CONVENIENT INSTALLATION: Easier replacement for traditional wiremold, raceway, or conduit. You can put on it effortlessly with a screwdriver..
  • RISK-FREE SHOPPING: If our product doesn't meet your needs, feel free to contact us. We are willing to provide you a new one or a full refund..
Check Stock

Woodhead 35970 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 5.00\ Mesh Length, .25–.36\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 5 in. in mesh length and works with 0.36 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35974 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 10.00\ Mesh Length, .75–.99\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.99 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Woodhead 35972 Pulling Grip, Junior Duty, Flexible Eye, 1700lb Approximate Break Strength, 8.00\ Mesh Length, .50–.61\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 7 in. in mesh length and works with 0.61 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Woodhead 35973 Pulling Grip, Junior Duty, Flexible Eye, 2800lb Approximate Break Strength, 10.00\ Mesh Length, .62–.74\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 10 in. in mesh length and works with 0.74 in. cable diameter. The pulling grip cable maintains an approximate break strength of 1700 lb..
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

Woodhead 35975 Pulling Grip, Junior Duty, Flexible Eye, 4100lb Approximate Break Strength, 12.00\ Mesh Length, 1.00–1.24\ Cable Diameter

  • Pulling Grip: considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit.
  • Design: made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability.
  • Applications: flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles.
  • Easy-to-install: the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cable/nylon and wire rope.
  • Specifications: flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..
Check Stock

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock

Hot Wheels Roll Out Raceway Track Set

  • ​The Hot Wheels Roll Out Raceway combines racing and storage in one cool and convenient package.
  • ​When collapsed, the Hot Wheels Roll Out Raceway serves as a bucket that can hold up to 80 die-cast vehicles and 5 track pieces It includes a....
  • ​When unrolled, the Hot Wheels Roll Out Raceway is a 5-lane raceway, with a fair start mechanism and a finish line that shows the winner -- up to 5....
  • ​The tracks can connect to other sets (sold separately) for extended racing and enhanced challenges.
  • ​With a car included for action right out of the box, the Hot Wheels Roll Out Raceway set is an awesome gift for kids 4 years and older.
Check Stock

Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver

  • A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
  • It is a service entrance cable accessory, but not a metal cable.
  • The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
  • Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.
Check Stock

D-Line 39\ White Quarter Round Cable Raceway, Corner Cord Cover, Self-Adhesive Floor Molding with Wire Channel, Baseboard Cable Hider - 0.87\ (W) x 0.87\ (H) x 39-inch Length - White

  • D-Line 0.87” x 0.87” Quarter Round Cable Raceway covers expansion gaps between wood floors and baseboards, while providing an easy-to-use cord cover around floor perimeters. These features make D-Line Quarter Round Raceway a popular alternative to traditional floor edging, with the added benefit of a cable channel! Popular for hiding cables around benches and worktops too..
  • The 0.87” x 0.87” (W x H) Quarter Round Raceway dimensions scale well to blend with popular baseboards, while providing capacity for cables bending around corners, ideal to cover cords on benches and worktops also..
  • D-Line Quadrant Cable Raceway lengths are supplied with strong self-adhesive backing for peel & stick installation..
  • D-Line corner raceway has a one-piece design & patented click-lock lid for quick and easy installation… while also providing flexibility to add or remove cables. D-Line 0.87” x 0.87” Raceway features combine to enable approximately 50% quicker installation versus traditional baseboard trims! To cover cords around 90-degree bends Raceway Accessories are available, allowing the user to hide cords around a variety of popular angles..
  • Each pack contains: 1x D-Line Quarter Round Cable Raceway - 0.87” (W) x 0.87” (H) x 39” Length – White (pai....
Check Stock

Hot Wheels 2018 50th Anniversary Then And Now Nissan Skyline GT-R R33 46/365, Blue

  • ​The Hot Wheels Roll Out Raceway combines racing and storage in one cool and convenient package.
  • ​When collapsed, the Hot Wheels Roll Out Raceway serves as a bucket that can hold up to 80 die-cast vehicles and 5 track pieces It includes a carrying-handle for easy portability.
  • ​When unrolled, the Hot Wheels Roll Out Raceway is a 5-lane raceway, with a fair start mechanism and a finish line that shows the winner -- up to 5 cars can race at one time.
  • ​The tracks can connect to other sets (sold separately) for extended racing and enhanced challenges.
  • ​With a car included for action right out of the box, the Hot Wheels Roll Out Raceway set is an awesome gift for kids 4 years and older.
Check Stock

D-Line Cord Cover Decorative Wall Cord Hider Paintable Cable Concealer Cable Raceway Wire Cover Wall Mounted TV Wire Hider Electrical Cable Management - 1.18in W x 0.59in H x 39in Length - White

  • D-Line Cable Raceway is a cable management solution used to hide & protect surface cables. By utilizing D-Line Raceway - appearance improves, with the half-round profile of D-Line cord hider designed to discreetly hide cords. D-Line Raceway also protects surface cables by making cords less accessible to curious pets and infants..
  • Hide TV wires with D-Line’s decorative half round TV cord hider. Patented hinge and click-lock lid gives easy cord access, great when AV appliances are upgraded. Single piece 39-inch D-Line raceway lengths make stylish cord covers for wall mounted TV, as 39-inch is sufficient for covering wall mounted TV cord drops… versus shorter lengths which often require multiple short lengths & bulky connectors to hide TV cables..
  • D-Line Cable Raceway is a great wall cord cover, with D-Line’s half round wire cover blending with décor… and able to appear as the natural top section of baseboards. Compatible cord concealer accessory packs allow the user to hide wires around most popular angles. D-Line raceway bends & tees forgives imprecise cuts or measurements, while connectors & end caps fit securely under cable channel lengths. One-piece design of D-Line half round cable raceway avoids need to cut lid & b....
Check Stock