Reviews Conduit Body Conduit Locknuts

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Klein Tools D333-8 Conduit Locknut and Reaming Pliers

  • Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
  • Reams and smoothes both inside and outside of conduit.
  • Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

Rectorseal 55996 Quart Gray Pvc Conduit 633L Low Voc Pvc Solvent Cement

  • PVC Electrical Conduit Cement 633L is specially formulated for use on PVC conduit Types I and II.
  • It is a medium body cement in clear or gray to match conduit color.
  • Medium fast setting allows corrections before setting up.
Check Stock

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

Klein Tools 935 Level, 9-Inch Magnetic Torpedo Level with 3 Vials and V-groove, Tapered Nose

  • Level's high-visibility orange body is easy to see on conduit and at the jobsite.
  • Torpedo level has large, easy-to-read high-visibility vials at 3 angles: level, 90 and 45 degrees.
  • Large top-view vial windows enable easy readability from multiple angles.
  • Magnetic bottom holds securely to conduit and metal surfaces.
  • V-Groove fits contour of conduit and pipe.
Check Stock

Klein Tools 935AB1V Level, 2.5-Inch Conduit Bending Level, 1 Vial, ACCU-BEND Level Eliminates Dog-Legs in Offsets and Saddle Bends

  • Thumb screw attaches level to conduit to help eliminate dog legs when bending.
  • Large, easy-to-read high-visibility vial.
  • High-visibility orange body is easy to see on conduit and at the jobsite.
  • V-Groove fits contour of conduit and pipe.
Check Stock

Birchwood Casey Scissors Base Target Stand

  • Set includes: (1) 1/2" 7x12 AR500 Shooting Target Body, (2) AR500 Universal Ground Stand Legs, and (2) 3/8” bolts and nuts. Legs can be used with....
  • Simply slide the body slots into the stand leg slots and you're ready to shoot..
  • Entire assembly can be placed on the ground or raised to your preferred height with 3/4” conduit commonly found at Lowe’s, Home Depot, etc..
  • When you're finished shooting, line up the body and stand holes, insert the bolts, tighten the nuts, and your target can be easily carried..
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length :25',ID:3/4inch,OD:1inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
  • 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50',ID:1inch,OD:1.22inch, The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Morris Products Conduit Hanger With Bolt Features –1/2 Inch - Secures Rigid, EMT Conduit to Mounting Surfaces – Insulated Supports - Zinc-Plated Steel – Threaded Rod - 100 Pieces

  • SECURE CONDUIT: Ensure that your Rigid and EMT conduit is safely secure to mounting surfaces with this conduit hanger with bolt features..
  • DURABLE CONSTRUCTION: Morris Products’ Conduit Hangers with Bolt Features are manufactured from zinc-plated steel for ultimate durability..
  • SIZE AND QUANTITY VARIETY: Choose the exact size of conduit hangers you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” and 4”. Obtain quantities of 25, 50 and 100 in each pack..
  • IDEAL FOR MOUNTING SURFACES: Take less time to complete each task when equipped with these high-quality conduit hangers that include hardware, insulated supports and a threaded rod..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Modway Conduit 7 Piece Rattan Patio Dining Set in Brown and Mocha

  • Refresh your alfresco space with the Conduit 7 Piece Outdoor Patio Dining Set. Bringing transitional style with contemporary modern flair to any outdoor area, Conduit Armchairs feature a powder-coated aluminum frame wrapped in synthetic UV-resistant wicker rattan. Foam padded cushion and waterproof cover offer a comfortable seat while dining or entertaining. The Conduit 70" Dining Table features a tempered glass tabletop provides a smooth, easy-to-clean surface ideal for dining and entertaining.
  • Set Includes: One - Conduit 70" Outdoor Dining Table, Six - Conduit Outdoor Dining Armchair.
  • Overall Product Dimensions: 120"L x 88.5"W x 34.5"HTable Dimensions: 70"L x 38.5"W x 30"HChair Dimensions: 25"L x 24.5"W x 34.5"H.
  • Material: Square aluminium tube:40*40*1.5mm.
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock