Reviews Conduit Locknut Pliers

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

Snowpiercer: The Complete First Season S1 (DVD)

  • 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK，Size：3/4inch， The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
  • 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
  • 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
  • Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
  • 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock

Morris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack

  • Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
  • For use with Non-Metallica Liquid Tight conduit.
  • Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock

FirmiBang Liquid Tight Connector 3/4 in - Non-Metallic Electrical Conduit Fittings, UL Listed PVC Conduit Fitting (Straight, 5 Pack)

  • ▲PREMIUM QUALITY - Liquid tight connectors are made of high-impact PVC, Flammability rating 94V-2, Temperature index 125 ° C. Rust and corrosion resistant..
  • ▲Easy to install - FirmiBang flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule..
  • ▲Wide Application Range - Electrical conduit connector is suitable for indoor or outdoor use. Connects type B non-metallic liquid-tight conduits to weatherproof outlet boxes, pool and spa equipment motors, central air-conditioning units and various other electrical enclosures and hubs..
  • ▲PACKAGE - Each connector comes with a sealing washer and locknut. We have different models of liquid-tight connectors to meet your different needs..
  • ▲After-sales guarantee - If you have any question with our liquid tight connectors , Feel free to contact us. We will answer you as soon as possible..
Check Stock

ISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4

  • HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
  • SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
  • EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • PACKAGE - Each connector comes standard with a O-ring and locknut..
  • WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check Stock

1-in Liquid-Tight Connector

  • Superior liquid tight seal and pull out strength.
  • No threading of the conduit or tubing required.
  • Smooth interior surfaces for easier wire installation.
  • Furnished with steel locknut and seal gasket.
Check Stock

Lamson E943E-CAR Carlon Male Adapter

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting, 4 Pack, UL Listed

  • Material: Nylon material, resist sea water, gasoline, alcohol ,grease and so on..
  • Performance: Flammability classification 94V-2.
  • Installation: Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
  • Application: Suitable for indoor/outdoor usage.
Check Stock

OTC 4542 Stinger Wheel Bearing Locknut Socket Set - 7 Piece

  • 7-Piece wheel bearing locknut socket set.
  • For use with 1/ 2 inch ratchet or breaker bar.
  • Set contains 55 mm hex locknut socket 2-3/8 inch hex locknut socket 2-1/ 2 inch hex locknut socket 2-1/ 2 inch rounded hex locknut socket 2-3/4 inch rounded hex locknut socket 2-9/16 inch rounded hex locknut socket and 2-3/8 inch rounded hex locknut socket works.
Check Stock

Husky 1052 Mini Pliers Variety Set for Electrical and Maintenance Applications (Set of 5, Zippered Pouch Included)

  • PLIERS INCLUDE: Linesman, Diagonal, Long Nose, End Cutting, Flat.
  • COMPACT SIZE: With how small these are, you can fit these into tight spaces. This is useful for your electrical applications in tight areas, especially if you need to do delicate operations like pulling wire through conduit.
  • RUBBERIZED GRIP allows you to maintain full control, even when working in slippery conditions.
  • HIGH CARBON STEEL makes up the grabbing end of these pliers. This is a high-strength material that can be used in automotive and industrial applications.
  • ZIPPERED POUCH has hook and loop straps on the inside that fit all of the pliers included. Keep it zipped up and stored away, protecting these tools from the elements for when you need to use them next.
Check Stock

Rab Lighting HBHH100HQTVG HB HID Flood 100W MH QT HPF with Hood Verde Green

  • Housings: die cast aluminum with powder coat finish.
  • Set screw for hood, grill, or visor attachment.
  • Heavy duty mounting arm with internal O-ring, locking teeth, and stainless steel screw.
  • EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver.
  • rugged die cast aluminum ballast housings with powder coat finish.
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal tool includes 1 x Hose Clamp Pliers.
Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

  • Dual inlet thread for connecting pipe and locknut.
  • Machined flange for support against tank wall.
  • Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check Stock