Reviews Bearing Locknut

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

Mueller Industries 109-814 Float Valves, 0.75 Inch

  • Dual inlet thread for connecting pipe and locknut.
  • Machined flange for support against tank wall.
  • Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.
Check Stock

APEX: The Story of the Hypercar

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels m....
Check Stock

OTC 9852 6 and 8-Point Wheel Bearing Locknut Socket Set with Tool Board

  • Package Dimensions: 37.592 H x 64.77 L x 84.582 W (centimetres).
  • Wheel bearing locknut's are easy to remove or install with these specially designed sockets.
Check Stock

Teak Tuning Apex 71D Urethane Fingerboard Wheels, New Street Shape, 7.7mm Diameter, Ultra Spin Bearings - Made in The USA - Cream Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels make as you powerslide across a surface or do a sharp turn.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. ....
Check Stock

Teak Tuning Apex 71D Urethane Fingerboard Wheels, New Street Shape, 7.7mm Diameter, Ultra Spin Bearings - Made in The USA - Cherry Red Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels m....
Check Stock

Teak Tuning Apex 71D Urethane Fingerboard Wheels, New Street Shape, 7.7mm Diameter, Ultra Spin Bearings - Made in The USA - UV Vanilla Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels make as you powerslide across a surface or do a sharp turn.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. ....
Check Stock

Teak Tuning Apex 71D Urethane Fingerboard Wheels, New Street Shape, 7.7mm Diameter, Ultra Spin Bearings - Made in The USA - Grey & White Swirl Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 71D DUROMETER || The New Street Style wheels hit the sweet spot with a 71D durometer. They’re not too hard, and they’re not too soft. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels m....
Check Stock

OTC 1909 3-1/4" 8-Point Octagon Locknut Wrench

  • 3-1/4 inch 8-point octagon locknut wrench.
  • High strength steel resists rounding out.
  • For use with 3/4 inch square-drive manual tools only.
  • Measure from flat to flat to determine size of locknut.
Check Stock

Teak Tuning Apex 61D Urethane Fingerboard Wheels - New Street Shape, 7.7mm Diameter - Ultra Spin Bearings - Made in The USA - Denim Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 61D DUROMETER || The New Street Style 61D wheels are our softest wheels yet, and are equivalent to 101A hardness. The feel of these wheels are very similar to real skateboard wheels. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These wheels are made in the USA using a premium quality, custom Teak blended urethane. Each wheel is casted and cut in New York. Colors are handmixed and may vary slightly between sets. Many fingerboarders love the squeak....
Check Stock

Teak Tuning Premium Fingerboard Apex Bearing Wheels, Strawberry – Matte Finish – New Street Style, Custom Teak Urethane – Custom Bearing Lock Pocket – 77D Hardness, 7.7mm Dia. – Made in The USA

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 77D DUROMETER || These New Street Style wheels feature a 77D durometer, making them slightly harder than the 71D Apex Wheels. With a 7.7mm diameter, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket – a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These custom wheels are made in the USA with premium quality urethane. Many fingerboarders love the squeak sound that urethane wheels make as you powerslide across a surface or do a sharp turn.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sti....
Check Stock

Teak Tuning Apex 61D Urethane Fingerboard Wheels - New Street Shape, 7.7mm Diameter - Ultra Spin Bearings - Made in The USA - Ocean Swirl Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 61D DUROMETER || The New Street Style 61D wheels are our softest wheels yet, and are equivalent to 101A hardness. The feel of these wheels are very similar to real skateboard wheels. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These wheels are made in the USA using a premium quality, custom Teak blended urethane. Ea....
Check Stock

Teak Tuning Apex 61D Urethane Fingerboard Wheels - New Street Shape, 7.7mm Diameter - Ultra Spin Bearings - Made in The USA - Grey & White Swirl Colorway

  • APEX SERIES, NEW STREET STYLE FINGERBOARD WHEELS || The New Street Style bearing wheels are the first of many Teak Tuning Apex Series shapes to be released. The New Street Style wheels are the “standard” fingerboard wheels that have the typical size and shape that is seen in fingerboarding.
  • 61D DUROMETER || The New Street Style 61D wheels are our softest wheels yet, and are equivalent to 101A hardness. The feel of these wheels are very similar to real skateboard wheels. Measuring 7.7mm in diameter and 4.9mm wide, these wheels are great for easy riding and doing tricks on all kinds of surfaces.
  • BEARING POCKET || We took all the feedback from the first release and have worked to make these even better. Apex wheels now include a Bearing Pocket - a full custom bearing lock that prevents the bearing from coming out except while using a bearing press. Additionally, we’ve further tweaked our custom bearings to provide even more spin – and with the ability to full tighten the locknut down, these wheels spin forever.
  • MADE IN THE USA || These wheels are made in the USA using a premium quality, custom Teak blended urethane. Each wheel is casted and cut in New York. Colors are handmixed and may vary slightly between sets. Many fingerboarders love the squeak....
Check Stock