Reviews Conduit Compression Coupling
Morris Products 14940 EMT Compression Connector, Steel, 1/2\ Trade Size (Pack of 25)
- EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure..
- Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures.
Check StockPVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4
- ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
- PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
- SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
- TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
- AIRFLOW: PVC pipe cover works as pipe sc....
Check StockLegines Brass Compression Tube Fitting Comp Union Coupling Assortment Kit 1/8 3/16 1/4 5/16 3/8 & 1/2 6 Sizes 22 Pcs
- Kit contains 6sizes: 1/8"(2 pcs), 3/16"(10 pcs), 1/4"(4 pcs), 5/16"(2 pcs), 3/8"(2 pcs) and 1/2" (2 pcs)compression coupling, total 22pcs..
- Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
- This compression union assortments are designed for specialty and general repair shops..
- Meets specifications and standards of ASA, ASME asn SAE..
- Compression unions for joining copper, brass, or aluminum tubing in low-pressure applications.
Check Stock8MILELAKE 1000psi Diesel Direct & Indirect Engine Compression Pressure Tester Gauge Test Tool Kit
- This diesel compression tester kit comes complete with adapters for both direct and indirect diesel injected engines.
- It checks diesel engine compression under cranking conditions and comes with small profile, quick coupling adapters for speed and security.
- The built-in pressure relief valve enables repeat tests without dismantling.
- The flexible hose (355 mm) gives access to restricted plug and injector ports.
- Dual scale 80 mm diameter Gauge 0 - 1000 psi and 0 - 70 bar.
Check StockParker Instrumentation Tube Fitting Accessory - Cap for use with Inch Tubing
- The item is Anderson Metals 730081-08 1/2" Brass Compression Cap.
- Used for Rough Plumbing, Pipe and Conduit.
- The product is manufactured in United States.
Check StockRain Bird CEP710X Drip Irrigation Easy Fit Compression End Plug and System Flush Fitting .710 Diameter
- Easy Fit compression coupling for rapid termination and flushing of .710" outside diameter Drip tubing.
- Removable threaded end-cap simplifies system flushing, and end-of-season winterization.
- Requires 50% less force than competitor’s compression fittings.
- Constructed of highly durable UV and chemical-resistant materials to assure long life.
- Durable, leak-resistant connection stays in place season after season.
Check StockB and K Industries 160-106 1-1/4-Inch PVC Compression Couplings
- 1-1/4″ PVC Compression Repair Coupling, Nuts With Rubber Gaskets, Rated At 150 PSI At 73 Degree Fahrenheit, For Use In Cold Water Applications On Galvanized Or Plastic Pipe..
Check StockManufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3
- Material:Conduit hangers are made of zinc-plated iron,durable to use..
- Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
- High-quality and durable conduit hangers with bolt..
- Used to secure and suspend EMT, rigid conduits from overhead supports..
Check StockSnowpiercer: The Complete First Season S1 (DVD)
- 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK,Size:3/4inch, The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
- 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
- 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
- Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
- 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock5 PC - Brass Compression Elbow Fitting 1/4\ OD Tube x 1/8\ NPT Male Pipe
- Elbow for connecting and disconnecting two tubes more easily than with a coupling.
- Compression tube connections on all ends.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Operating temperature range of -65 to +250 degrees F.
- Three piece construction - nut, sleeve and body.
Check StockVis Brass Compression Tube Fitting, Union, 1/2\ OD x 1/2\ OD (Pack of 5)
- Union for connecting and disconnecting two tubes more easily than with a coupling.
- Compression tube connections on both ends.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- Operating temperature range of -65 to +250 degrees F.
- Three piece construction - nut, sleeve and body.
Check Stock9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm
- Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
- Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check StockLiquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia
- 【PREMIUM Liquid-Tight Conduit】- Length :25',ID:3/4inch,OD:1inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
- 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
- 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
- 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
- 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock