Reviews Compression Coupling

8MILELAKE 1000psi Diesel Direct & Indirect Engine Compression Pressure Tester Gauge Test Tool Kit

  • This diesel compression tester kit comes complete with adapters for both direct and indirect diesel injected engines.
  • It checks diesel engine compression under cranking conditions and comes with small profile, quick coupling adapters for speed and security.
  • The built-in pressure relief valve enables repeat tests without dismantling.
  • The flexible hose (355 mm) gives access to restricted plug and injector ports.
  • Dual scale 80 mm diameter Gauge 0 - 1000 psi and 0 - 70 bar.
Check Stock

Rain Bird CEP710X Drip Irrigation Easy Fit Compression End Plug and System Flush Fitting .710 Diameter

  • Easy Fit compression coupling for rapid termination and flushing of .710" outside diameter Drip tubing.
  • Removable threaded end-cap simplifies system flushing, and end-of-season winterization.
  • Requires 50% less force than competitor’s compression fittings.
  • Constructed of highly durable UV and chemical-resistant materials to assure long life.
  • Durable, leak-resistant connection stays in place season after season.
Check Stock

B and K Industries 160-106 1-1/4-Inch PVC Compression Couplings

  • 1-1/4″ PVC Compression Repair Coupling, Nuts With Rubber Gaskets, Rated At 150 PSI At 73 Degree Fahrenheit, For Use In Cold Water Applications On Galvanized Or Plastic Pipe..
Check Stock

5 PC - Brass Compression Elbow Fitting 1/4\ OD Tube x 1/8\ NPT Male Pipe

  • Elbow for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on all ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

Vis Brass Compression Tube Fitting, Union, 1/2\ OD x 1/2\ OD (Pack of 5)

  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4\ OD x 5/16\ OD)

  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Three piece construction - nut, sleeve and body.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Vis Compression Union Straight, 3/8\ OD x3/8 inch OD COMP Brass Tube Fittings (Pack of 5)

  • Union Straight for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

Cen-Tec Systems 68866 14” Natural Fill Floor Brush for Commercial Back Packs and Canister Vacuums

  • 14” natural fill floor brush designed to fit to industry standard 1 ½” s-wands equipped with abs or metal compression collars.
  • The robust natural fill completely encompassed the base of the brush and is designed to insure no damage to floor surfaces including hard wood, tile, polished stone, vinyl, nor laminate. A window cut to the front face of the brush allows the vacuum to capture larger debris rather than push it around as with a broom. These features make this tool ideal for hardwood floor refinishers.
  • Made of a durable PP with a reinforced collar the 68866 is designed for reliable use in a commercial environment.
  • Can be mounted and securely held by commercial extension wands equipped with a compression coupling for above the floor applications.
  • Compatible with all major brands of back pack vacuums using 1 ½” s-wands including: Sanitaire, Pro-Team, Karcher, Tennant, Mosquito, Mercury, Hawke, Nilfisk, and Sandia.
Check Stock

Fender Rumble 210 CABINET V3

  • Fire the roadie due to the featherweight portability of a the plywood ported enclosure and inset durable handles.
  • For sweet and clear high end with focused definition, this Rumble cabinet features a high-frequency compression tweeter with a convenient three-position full/off/-6dB switch.
  • For even more secure and efficient coupling between amp head and speaker enclosure, this cabinet is equipped with a Speakon jack in addition to a standard ¼” jack.
  • Pair this enclosure with the Fender Rumble 200 head or Fender Rumble 200 combo for a matched appearance and great tone.
  • Be confident with the power you use with this as the this 2x10 cabinet is rated at 700 watts (program), 350 watts (continuous).
Check Stock

American Standard AS738756-0070A Champion 4 Tank to Bowl Gasket, 1 pack, Black

  • BEST-IN-CLASS: The American Standard toilet bowl to toilet tank coupling kit ensures there are no surprise leaks with your toilet.
  • PERFORMANCE: American Standard toilet parts provide durability for bathrooms for years to come. With the Champion 2 coupling kit, expect reliable performance and durability.
  • COMPATIBILITY: Before you install, confirm compatibility by ensuring that your toilet will accept this toilet bowl to toilet tank coupling kit by checking repair part information.
  • FLAWLESS DESIGN: Designed to keep the toilet bowl and toilet tank connected with no leaks, this American Standard coupling kit is easy to install and is durably constructed.
  • INCLUDES: Coupling kit includes the toilet tank gasket, speed connect tank to bowl bolt kit with two 5/16 in. hex nuts, captive washers and speed connect bolts, two grommets, a Fluidmaster coupling nut, washer, and a close coupling washer.
Check Stock

285753A 285140, 280152, 285743, 285753, 285753AVP, 62672, 62693, 80008 3364003 3364002 AP3963893 Washer Motor Coupler, Motor Coupling Kit, Replacement for Maytag Kenmore Washing Machine

  • [285753A Packing Include] You will get 1Set 285753A Washer Direct Drive Motor Coupling..
  • [Part Number]280152, 285140, 285743, 285753, 285753A, 285753AVP, 21003, 62672, 62693, 80008, 661560, 3352470, 3363664, 1195967, AP3963893, PS1485646, EAP1485646, etc..
  • [285140 Compatible] Replacement for Kenmore, Crosley, Roper, Admiral, Amana, Estate, Inglis, etc., and Other Major Brands..
  • [Washer Direct Drive Motor Coupling Premium Quality] Our Washer Direct Drive Motor Coupling Made from heavy-duty plastic, It meets or exceeds all original manufacturer specifications for fit and performance..
  • [Service Gurantee] This Washer Direct Drive Motor Coupling comes complete with a 12-Month warranty. Our department Usually does a 100% quality inspection on the Washer Direct Drive Motor Coupling before delivery. We will refund if the Washer Direct Drive Motor Coupling is defective. If you have any problems, feel free to contact us..
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock