Reviews Compressor Impeller

MXBAOHENG Pneumatic Mixer 5 Gallon Handheld Air Agitator Paint Mixer with 10CM Diameter Aluminum Alloy Impeller for Dye/Resins/Ink Mixing

  • 【Three-cylinder pneumatic motor】The motor speed is adjusted by the air regulating valve. The higher the air pressure, the faster the speed. Equipped with a silencer: it can minimize the sound of the mixer (the noise level of the mixer is related to the opening degree of the air regulating valve)..
  • 【Parameter】Stirring rod length: 40cm, Working pressure: 6-8MPa, Power: 1/8HP, Speed range: 50-2600RPM. It needs to be used in conjunction with an air compressor. Suitable for Air compressor: power: above 3kw, working pressure: 4~6 standard atmospheric pressure (58.78PSI~88.18PSI)..
  • 【Load Safety】It can decelerate or stop automatically according to load changes, and can automatically recover when load decreases.
  • it can be overloaded, and it will stop running if overloaded for a long time, without damaging, it has a self-cooling effect..
  • 【Closed Design】 Environment friendly pneumatic mixer, can be used in damp, dust and other harsh environments. Working temperature: 10-65 ℃, can be used continuously for 24 hours..
  • 【High Quality】Explosion-proof, small size, light weight, simple operation, the stirring rod and the stirring impeller are corrosion resistant, acid and alkali resistant, removable, etc..
Check Stock

MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller

  • 【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
  • 【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
  • The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
  • the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
  • 【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
  • 【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
Check Stock

MXBAOHENG Pneumatic Mixer 50-250L Paint Mixer 2500RPM Air Agitator Automatic Stirring Machine Portable Explosion-Proof Mixer for Water/Resin/Latex Mixing w/Stainless Steel Impeller

  • 【Main Parameters】 Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. It needs to be used in conjunction with an air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² / 99.56PSI..
  • 【High Quality】The stirring rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM, which can fully stir the pigment deposited at the bottom of the container.
  • the stirring impeller are corrosion resistant, acid and alkali resistant, removable, etc..
  • 【Load Safety】This portable pneumatic mixer can decelerate or stop automatically according to load changes, and can automatically recover when load decreases.
  • it can be overloaded, and it will stop running if overloaded for a long time, without damaging, it has a self-cooling effect..
  • 【Heat Dissipation Function】The porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
  • 【Cylinder Motor】Powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment w....
Check Stock

Water Pump Impeller 369-65021-1 47-16154-3 18-3098 for Mercury Sierra Tohatsu 2HP 2.5HP 3.5HP 4HP 5HP 6HP

  • Water motor impeller have 6 blades.Height:14.30mm,External Impeller Overall Diameter:33.58mm,Internal Shaft Insert Diameter:10.25mm..
  • This aftermarket impeller replaces Mercury outboard motor part #47-16154-3,Tohatsu outboard motor part 369-65021-1, impeller 18-3098..
  • Water pump impeller are 100% brand new and don't used or rebuilt..
  • Similar in design to stock OEM units and require only simple hand tools for installation.Direct replacement,OE level quality and durability..
  • Water pump impeller 100% compatible with OE parts and passed TS16949 certified.Fits for Mercury/Mariner (4-STROKE) Carb 2HP 2.5HP 3HP,Mercury/Mariner (2-STROKE) 4HP 5HP,6HP..
Check Stock

Volvo Penta Sea Water Cooling Pump Impeller Kit New OEM 4.3L,5.0L,5.7L 21951346

  • Water impeller are made of high quality neoprene,brass.High performance and durable..
  • Impeller replaces Jabsco 1210-0001,Johnson 09-1027B 09-1027B-1,OMC 3588256,Sierra 18-3081,SIE 18-3081,GLM 89540,Mallory 9-45703,Onan 132-0162,Perkins....
  • Water pump impeller diameter is 2-1/4",width is 1-1/4",shaft Diameter is 16mm..
  • Water pump impeller are 100% brand new and don't used or rebuild..
  • Water impeller have 12 months warranty and directly replacement and easy to install..
Check Stock

BODAO 47-89984T4 47-F694065 Boat Engine Water Pump Impeller for Mercury 65-225HP for Chrysler/Force 85/90/120/125/150HP Outboard Motor

  • Water Pump Impeller Dimensions : 【OD】2.33 inch 【Thickness】0.89 inch【Shaft Size】1.30 inch, Blades 6. Because of manual measurement, the data error ±0.02in.Neoprene Water Pump Impeller with Plastic Hub as Pictures Showed, Please see the pictures..
  • This Water Pump Impeller fits Mercury 65-225HP Chrysler/Force 85/90/120/125/150HP Outboard Motor OEM P/N 47-89984T4 47-F694065. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Original standard, direct replacement for the old or broken water pump impeller..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase..
  • You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. Were pleasure to help you..
Check Stock

WINGOGO Water Pump Impeller 0375638 for 10/15/18/20/25/35 HP Johnson Evinrude OMC Outboard 0775518 0777829 Sierra 18-3002

  • This Water Pump Impeller fits Johnson Evinrude OMC Outboard Motor OEM P/N 775518 375638 777829 Sierra 18-3002. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Johnson Evinrude OMC Outboard 10/15/18/20/25/35 HP Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water Pump Impeller Dimensions : Internal / Insert / Hub / Shaft Size: 0.501 inch , Depth / Height / Width/Thickness: 0.505 inch, Overall / Outer / External Diameter: 2.750 inch. Blades 6 Neoprene Water Pump Impeller as Pictures Showed, Please see the pictures..
  • Compatible with the outboards boat motor Sierra Marine 18-3002 Mallory Marine 9-45215 GLM 89650 SEI Marine 96-363-03E CEF 500351. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANCE to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirm this Water Pump Impeller fits Your Outboard Boat Motor or not. We’re pleasure to help you..
Check Stock

WINGOGO Water Pump Impeller for 25/30/35 HP Johnson Evinrude OMC Outboard 0763982 0388702 0389983 Sierra 18-3052

  • This Water Pump Impeller fits Johnson Evinrude OMC Outboard Motor OEM P/N 0763982 0388702 0389983 Sierra 18-3052. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Johnson Evinrude OMC Outboard 25/30/35 HP Boat Motors Engine Cooling System. Also for vintage Mercury outboards From 1970 through 1985 20 hp 47-89982. More Detailed Information Please See Description Below..
  • Water Pump Impeller Dimensions : Internal / Insert / Hub / Shaft Size: 0.628 inch, Depth / Height / Width/Thickness: 0.754 inch, Overall / Outer / External Diameter: 2.015 inch. Blades 6 Neoprene Water Pump Impeller as Pictures Showed, Please see the pictures..
  • Compatible with the outboards boat motor Sierra Marine 18-3052 Mallory Marine 9-45311 GLM 89820 SEI Marine 96-299-03F CEF 500311. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANCE to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirm this Water Pump Impeller fits Your Outboard Boat Motor or not. We’re pleasure to help you..
Check Stock

OCPTY Water Pump Impeller Kit 5001594 05001594 Compatible For Evinrude Johnson For 85 88 90 110 112 115 HP V4 Outboard Engines

  • IMPELLER KIT fits for Evinrude Johnson 85 88 90 110 112 115 HP V4 Outboard (for more details, please take the product description as reference).
  • IMPELLER MATERIAL is the strongest marine and hardened nylon and scientifically engineered high performance neoprene rubber.
  • WATER PUMP IMPELLER is the component that works on the liquid. The impeller rotates at high speed in the pump body driven by the pump shaft, so that the liquid flowing through the pump can obtain energy.
  • THE SIZE OF IMPELLER KIT is 12*12*11.5, there may be some errors in manual measurement, please take the real object as standard.
  • VARIOUS TYPES OF IMPELLERS are supplied in OCPTY online store, just go for any type you want. 1 year maintenance period offered.
Check Stock

Water Pump Impeller Kit,Compatible with Volvo Penta V6 V8 3.0 4.3 5.0 5.7 8.1 Engines,Johnson 09-812B F6B-9 and Jabsco 13554-0001P Sierra 18-3306 3588914, 3584350, 21213664, 3593660, 2123664 3841696

  • ◆ New Impeller Compatible with Volvo-Penta 3588914, 3584350, 21213664, 3593660, 2123664 & 3841696. Compatible with Johnson 09-812B, 09-812B-1. Compatible with Sierra 18-3306.Compatible with Yanmar 119773-42600. Compatible with Yamaha 6TA-12457-00.Compatible with Indmar S685007（320HP，325HP，330HP，335HP，340HP, 350HP）.
  • ◆New Impeller Compatible with Volvo Penta, OMC, Indmar, Yamaha, Jabsco, Johnson, Onan, Perkin,Yanmar and many other brands.If purchasing for Volvo Penta, it only fits the pumps with LONG screws used on 2005 and newer boats. Please see picture. Please note, prior to 2005 Volvo Penta used a shorter impeller on some applications. Please check your part number or size..
  • ◆Material and use:each water impeller rebuild kit is 100%new and made of high material Neoprene.Durable and sturdy. Silhouette: K 12 blades, Easy Installation.this outboard motor impeller is to pump the water through the cooling system of the engine, providing big power to your boat, and will be cooling greatly after installation..
  • ◆ New Impeller Size: Width 1-15/16"(49.2mm) . Diameter 2-1/4"(57.1mm) . shaft 5/8"(16mm) ,Drive: 12 spline.
  • Package include：1x Impeller, 1x Gasket,1x O-rings..
  • ◆Providing high quality and professional parts with great service.if y....
Check Stock

WINGOGO 19210-881-A02 Water Pump Impeller Replacement for Honda Outboard 5 7.5 8 10 HP Boat Motor Engine Parts Replace Sierra 18-3245 19210-881-A01 19210-881-003

  • Water Pump Impeller for Honda Outboard OEM P/N 19210-881-003 19210-881-A01 19210-881-A02 Sierra 18-3245. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Water Pump impeller replacement for 5HP 7.5HP 8HP 10HP Honda Outboard Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water pump impeller dimensions measured that shaft size 14.2 mm, overall diameter 41.0 mm, thickness 23.7 mm, Blades 8. Water pump impeller is made with neoprene and metal alloy as pictures showed, Please see the pictures..
  • This water pump impeller makes repair and maintenance of water pumps easy. Professional installation is suggestion. Compatible with Sierra Marine 18-3245, Mallory Marine 9-45100, CEF 500327..
  • To find the right water pump impeller for your outboard,it is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not sure, We're pleasure to help you..
Check Stock

Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set)

  • Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set).
  • Package Content: 2 x Carbon Brushes, 1 x Impeller, 1 x Seal.
  • Carbon Brush Size (Approx) : 18 x 6 x 6 mm.
  • Impeller Measures: 1-3/8" Diameter, 1/2" Width with D Shaped Drive Hub for 5/16" Diameter Shaft.
  • Impeller&Seal are also fits in FPOWER DC 12-Volt Utility Water Transfer Pump.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock