Reviews Coaxial Cable To Audio Input

Optical to Coaxial or Coaxial-to-Optical Digital Audio Converter, Bi-Directional Digital Coaxial to\\/from Optical（Toslink）SPDIF Audio Converter\\/Adapter\\/Repeater, with 1 Optical Cable \\/1 Coaxial Cable

  • 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input.
  • 【High Definition Audio】Noise-free transmission, high definition audio output for your amplifier and speaker.
  • [Multiple audio formats] Support up to 192 KHz 24bit sampling rate. Noise-free transmission, supports multi-channel surround sound, uncompressed LPCM/PCM audio and compressed 5.1 audio, including Dolby Digital (AC3), DTS to audio processor or A/V receiver with the ability to decode audio sources.
  • 【Easy to Setup】 Plug and play, no need any software and driver.
  • You will get Digital 2-Way Audio Converter, 1 fiber optic cable,1 coaxial cable, 1 Micro Cable and plug, 1 manual, 5 star customer service, please contact us by email..
Check Stock

4K HDMI Audio Extractor Splitter, HDMI to HDMI + Optical Toslink SPDIF + 3.5mm Audio Jack + Coaxial + 7.1Ch HDMI Audio Support ARC and eARC Function

  • 【4K HDMI Audio Extractor】4K HDMI 2.0 Audio Extractor is a high performance 1 HDMI input and 1 HDMI output with audio Extract Function. The Audio can be output by 3.5mm Audio Jack, Toslink SPDIF, Coaxial, HDMI Audio Port. It allows user to use the existing audio Receiver to receive 4Kx2K@60Hz, HDCP 2.3 content audio. The product also supports HDMI loop out, as well as 10bits HDR(High Dynamic Range ) pass-through and eARC/ARC Function..
  • 【Support ARC and eARC Function】Extract the Audio from TV to Soundbar or Amplifier. Connect your TV HDMI(ARC or eARC) Port to this Audio converter HDMI Output(ARC/eARC）Port with HDMI Cable, then connect Optical cable or HDMI Cable or Coaxial to Amplifier or SoundBar. (Please Note: eARC and ARC function is only available from the Optical SPDIF, Coaxial and HDMI Audio Port.) And When you select eARC function, Please make sure that your TV has power on eARC function and HDMI CEC function is also on..
  • 【High HDMI Input Resolution】Support Up to 4K@60Hz RGB 8:8:8. Color Space: RGB 8:8:8, Ycbcr 4:4:4/ 4:2:2/ 4:2:0. Color Deep: 8-bit, 10 bit, 12 bit(1080p@60HZ).
  • 8-bit (4kx2k@60Hz RGB 8: 8: 8/YUV 4: 4: 4) 8-bit, 10-bit, 12-bit(4Kx2K@60HZ Ycbcr 4:2:2/4:2:0)..
  • 【Supported HDMI Audio Extract formats】HDMI Audio Formats: ....
Check Stock

OREI eARC/ARC HDMI to Optical/Coaxial Audio Extractor, - Supports Dolby 5.1 Channel, DTS 5.1, LPCM 2.0 Channel HDTV Soundbar Speaker Amplifier (DA41)

  • Converts the audio signal from TV ARC/ eARC source into digital audio output of Toslink (optical) and coaxial simultaneously. Simply Connect your TV HDMI ARC port to Input of the DA41 and connect your audio device to the Coaxial or Toslink..
  • Input: HDMI ARC/ eARC, Output: Toslink/SPDIF and Coaxial..
  • Supports PCM5.1 / LPCM 2.0 Channel, HDMI Input to Optical/Coaxial 5.1 Output Headphone Output.
  • Supports [email protected], [email protected], Power on/off switch, LED indicator. (NOTE: It will not work with Dolby AC3/ Dolby Digital Plus etc., Also please set the Audio Output to PCM or LPCM before Using).
  • 1 x DA41 Audio Extractor, USB cable for Power, Manual. Comes with 1 Year Warranty. Troubleshooting - NOTE: When using the ARC function, the volume needs to be adjusted by your audio device. Make sure it is the HDMI ARC port of the connected TV and switch to the "on" state..
Check Stock

Analog to Digital Audio Converter, R/L RCA 3.5mm AUX to Digital Coaxial Toslink Optical Audio Adapter with Optical Cable, Coaxial Cable

  • Analog to Digital Audio Converter: Converts R/L RCA analog signal or 3.5mm jack AUX audio (Only 2.0Ch PCM or LPCM) to Digital Coaxial audio and Toslink Spdif Optical digital audio simultaneously. Please don't forget to set the audio output of L/R or 3.5mm Aux Port to PCM or LPCM as it is not compatible with 5.1 Channel Signal, such as Dolby Digital or DTS 5.1, Dolby-AC3..
  • High Sample Rates: Supports uncompressed 2-channel LPCM digital audio signal output.Supports output sampling rate at 48 KHz..
  • Input and Output Ports: Input Audio Connector:1x L/R Port, 1x 3.5mm jack AUX.
  • Output Audio Connector:1x Toslink,1x Coaxial.Powered by 5V/1A Power Adapter..
  • Plug and Play: Simple installation and easy operation. No extral drive installation matter. Powered by USB Cable.Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, AV Amps, etc..
  • What you Get:1x Analog to Digital Audio Converter,1x Optica Cable, 1x Coaxial Cable, 1xUser Manual,1xPower Adapter,1xIR Remote Control. Anber-Tech offers you a friendly and easy-to-reach customer service to solve your problems timely. If you have any problems, Please contact us we will slove immediately in 24 hours..
Check Stock

gofanco Audio Extender Over CAT5e / CAT6 - Coaxial/Toslink/Analog Audio, 1640ft (500m) Extension, Bi-Directional PoC, Up to 5.1-Channel, Supports Analog Stereo and Digital Audio (AudioCATExt500)

  • ✔ AUDIO EXTENDER – Extend Coaxial or Toslink digital audio signals up to 1640ft (500m) or Analog Stereo up to 1476ft (450m) over a CAT5e/6/7 cable. *Note: Good quality CAT cables are essential in delivering quality content.
  • ✔ AUDIO FORMATS – Coaxial & Toslink: Digital Audio up to 5.1-channel, supports Dolby Digital, DTS, PCM 2.0.
  • ✔ AUDIO OUTPUT – Digital audio sources can only produce audio to Toslink & Coaxial outputs.
  • Analog audio sources can produce audio to all 3 outputs. *Note: Only one input source is used at a time. When multiple sources are connected, the input priority is Analog 003e Coaxial 003e Toslink.
  • ✔ DUAL PoC – Allows 1 power adapter (connected to either the TX or RX) to power both devices through CAT cable.
  • ✔ SIMPLE INSTALLATION – No driver required.
  • Metal housing provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, visit our gofanco website or click on our name in the buy box and select "Ask a Question".
Check Stock

HDMI ARC Adapter to RCA Audio Converter Digital to Analog Stereo DAC Coaxial Optical ARC Input to Coaxial +Optical +L/R+3.5mm Jack Output for TV

  • 【Digital Audio Converter for TV】Multiple audio formats are converted to each other, supporting optical, coaxial, HDMI ARC input, optical and coaxial as well as 3.5mm AUX stereo and L/R RCA interface audio signal output at the same time. Only one audio format input can be selected at the same time, which is set by DIP switches..
  • 【HDMI ARC Adapter】HDMI ARC audio adapter can extract HDTV or projection audio that supports ARC and convert it to the audio format you need for output.( Note: If you need to use the HDMI ARC channel to transmit audio, the HDMI device (TV or projection, etc.) must support the ARC function, and the HDMI cable used needs to be an HDMI 2.0 version cable. At the same time, the converter does not support the use of the TV remote control to control the volume of the speakers.).
  • 【Pure Audio Signal】During the format conversion process of the audio signal, it will’t cause loss and interference, which will affect the quality of the audio signal.DTS/ Dolby-AC3/ DSD/ LPCM Supports sample rates including 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz. (Note: If you are using stereo R/ L or 3.5mm jack output, this unit can only support PCM audio form....
Check Stock

avedio links HDMI Switch Audio Extractor, HDMI Switch Splitter 2 Inputs 1 Output with Remote 4K@60hz, 2-Port HDMI2.0b Switcher Box with Optical Toslink SPDIF+Coaxial+Analog RCA Stereo Audio Out

  • ★[email protected] 2X1 HDMI SWITCH with AUDIO EXTRACTOR: This 4K HDMI Switch allows you connect Two HDMI 2.0 Sources to one display device, Each input source support audio extract by the Toslink+L/R+Coaxial audio output channel. No loss of quality after you split the signal. No degradation in audio quality..
  • ★ULTRA HD 4K VISUAL ENJOYMENT: Supports HDCP 2.2, HDMI2.0b,[email protected], RGB4:4:4, Full HD, UHD, HDTV, Deep Color to 36bit, also back compatible with [email protected] and 1080P. Max Bandwidth of 18.2Gbps. (Kindly Note: It is not compatible with DVI).
  • ★HDMI ADUIO EXTRACTOR: With Optical Tolink SPDIF+L/R+3.5mm Jack+Coaxial audio out allows you extract the audio from the HDMI input source ( Like PS4, PS5, Cable box, Xbox or any HDMI device)connection to a spearker, Amplifier etc. Note: If you choose optical or coaxial audio out, you can enjoy 5.1CH or 2CH or audio copy. If you choose 3.5mm or L/R audio out, you can enjoy 2CH or audio copy..
  • ★HDMI ARC ADAPTER: Supports ARC (Audio Return Channel), Extractor the Audio from TV to Soundbar or Amplifier. Connect your TV HDMI (ARC) Port to this switch HDMI Output Port with HDMI Cable, then using optical toslink, Coaxial, 3.5mm or L/R cable connect to the soundbar, Speaker, home theater, A/V rece....
Check Stock

Dingsun 192KHz Digital to Analog Audio Converter, Support USB Flash Drive/AUX/Coaxial/SPDIF/TOSLINK Input to R/L Stereo/3.5mm Jack Headphone Output, Support Decoder: SBC, AAC

  • ♬【Digital to Analog Audio Converter】Simple solution to convert coaxial or digital optical audio input to analog stereo L/R RCA and 3.5mm audio signal output. Make sure to change the audio output format to PCM or LPCM. (NOTE: It is only a Digital to Analog Audio Converter, not an Analog to Digital Audio Adapter, input and output cannot be reversed.).
  • ♬【Support Multiple Sampling Rates】Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz.
  • 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels. Support speakers and headphones play simultaneously. Built-in interference immunity and no signal input squelch circuit, provides crystal clear electromagnetic noise-free transmission. (NOTE: Do not support 192kHz sample rate audio).
  • ♬【Easy to use & Simple Settings】Connect the optical or coaxial cable to the signal source and converter, and then connect the RCA or 3.5mm audio cable to the output device and converter. Please set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. (Note: 5.1 channel is incompatible, please set the audio output to PCM or LPCM: Setting--Sound--Audio Format-PCM/LPCM).
  • ♬【Wide Compatibility】This DAC audio converter is compatible with devices with coaxial or toslink d....
Check Stock

PROZOR 192KHz Digital to Analog Audio Converter - Upgrade Volume Adjustable Optical to RCA Converter with Optical & USB Power Cable, Digital DAC Converter SPDIF TOSLINK to Stereo L/R & 3.5mm Jack

  • 192kHz DAC converter prozor digital to analog Audio converter, converts coaxial or Toslink digital PCM Audio signals to analog L/R RCA and 3. 5mm jack Audio simultaneously (input and output cannot be reversed).
  • Supports volume adjustment headphone amplifier function.
  • Audio amplifier chip and volume adjusting switch. Allowing you to drive your headphone directly and adjust the output volume. A similar amp function provides better sound quality..
  • 192kHz 24-bit sampling rate supports sampling rate at 32kHz, 44. 1kHz, 48kHz and 96kHz and 192 kHz.
  • 24-bit SPDIF incoming bit stream on L/R channels, to eliminate noise when no signal input, and automatically mute while non-audio input signal..
  • Aluminum metal casing durable aluminum metal shell makes it heat-resisted and high quality.
  • It can easily install and operate. Powered by 5. 5mm USB power cable (power adapter is not included).
  • Don't use Other plugs, It can only use 5V 1a plug..
  • Gold-plated input & output gold Plated interface to reduce signal transmission loss. Input Audio connector: 1 x Toslink (included 1m 4. 0/OD slink cable), 1 x RCA (coaxial).
  • output audio connector: 2 x RCA/L), 1 x 3. 5mm jack..
Check Stock

DAC Audio Digital to Analog Converter , Digital DTS Channel Decoder 5.1 Audio Converter Optical Fiber Coaxial Sound Adapter for PS3 HD DVD PS4

  • High performance: 24-bit audio digital signal processing, 96KHz digital receiver, 24-bit ADC. Supports uncompressed PCM, LPCM for all S/PDIF digital audio transmissions. Large audio decoding chip that decodes DTS / dolby digital audio source code..
  • Role: This 5.1 audio sound decoder converter converts coaxial digital audio from a DVD player, cable or satellite receiver to fiber optic input. Rich input interface: fiber, coaxial, analog audio interface, output interface: FL / FR, SL / SR, CEN / SW..
  • Premium Materials: Dac converter converts digital fiber or coaxial audio signals into analog RCA L / R and 3.5mm jack audio. Aluminum alloy case, lightweight, durable and heat resistant. Excellent performance, no electromagnetic noise transmission. Easy to install, practical and durable, easy to use..
  • Convenience: The compact form factor makes it suitable for installation in almost any location, regardless of space, while still providing lossless audio signals. In addition, digital coaxial or Toslink to RCA converters support plug-and-play installation, saving you time..
  • Use range: This audio converter can be used to decode network players, HD video players, DVD, SP3, and other output digital signals, HD DVD, HDTV, home theater, etc., without RCA output (L / R)....
Check Stock

Giveet Digital to Analog Audio Converter, DAC Digital SPDIF Optical (Toslink) to Analog L/R RCA & 3.5mm AUX Stereo Audio Adapter with Optical Cable for TV Box DVD PS3/PS4 Xbox Amp Home Cinema

  • 192kHz DAC converter prozor digital to analog Audio converter, converts coaxial or Toslink digital PCM Audio signals to analog L/R RCA and 3. 5mm jack Audio simultaneously (input and output cannot be reversed).
  • Supports volume adjustment headphone amplifier function.
  • Audio amplifier chip and volume adjusting switch. Allowing you to drive your headphone directly and adjust the output volume. A similar amp function provides better sound quality..
  • 192kHz 24-bit sampling rate supports sampling rate at 32kHz, 44. 1kHz, 48kHz and 96kHz and 192 kHz.
  • 24-bit SPDIF incoming bit stream on L/R channels, to eliminate noise when no signal input, and automatically mute while non-audio input signal..
  • Aluminum metal casing durable aluminum metal shell makes it heat-resisted and high quality.
  • It can easily install and operate. Powered by 5. 5mm USB power cable (power adapter is not included).
  • Don't use Other plugs, It can only use 5V 1a plug..
  • Gold-plated input & output gold Plated interface to reduce signal transmission loss. Input Audio connector: 1 x Toslink (included 1m 4. 0/OD slink cable), 1 x RCA (coaxial).
  • output audio connector: 2 x RCA/L), 1 x 3. 5mm jack..
Check Stock

Digital to Analog Audio Converter with Remote, 192KHz/24bit Digital Coaxial Toslink to Analog L/R RCA 3.5mm Audio with Both Toslink Cable and Coaxial Cable

  • 【Digital to Analog Audio Converter】-- It converts Coaxial/Toslink/Optical to Analog L/R audio with 3.5mm audio output, ( NOT capable of being reversed).
  • It can be connected to the headphone, headphone Amplifier. (Note: Please set the sound output of the signal source to PCM format.).
  • 【Supports Mainstream Digital Optical/Coaxial Input】-- Provides electromagnetic-noise-free transmission, Supports sampling rate at 32, 44.1, 48, 96,192khz, and 24-Bit SPDIF incoming bitstream to left and right channels.
  • 【Supports 2 Channel LPCM or PCM Digital Audio Signal】-- Some TV may have PCM/LPCM as the default setting. Otherwise, please set it to PCM or LPCM as below: Setting--Sound--Audio Format, such as Samsung TV, LG TV. (Not support Dolby, DTS, or other 5.1 channel surround sound signals).
  • 【IR Remote Control】-- With IR Remote control, you can easily adjust volume/choose coaxial or toslink input/mute/power on or off.
  • No need to leave the comfortable sofa. (In order to receive signal better, please aim at the infrared IR indicator on the converter when using the remote control), it can increase or decrease 40db based on the original output volume (without headphone connected).
  • 【Toslink Cable+Coaxial cable+USB Charger】-- Two cables are included for m....
Check Stock

Analog to Digital Audio Converter PROZOR ADC R/L RCA 3.5mm AUX to Digital Coaxial Toslink Optical Audio Adapter with Optical Cable for Blu-ray Player HD DVD AV Amp

  • 【ADC】This Analog to Digital Audio Converter Converts The R/L RCA Analog Signal Or 3.5mm Jack AUX Audio Simultaneously Into Digital Coaxial Toslink Spdif Optical Digital Audio (Cannot Be Reversed)..
  • 【RCA 3.5MM TO OPTICAL COAXIAL】Input: 2 x RCA (R/L, RCA Cable NOT Included), 1 x 3.5mm Jack AUX (3.5MM Cable NOT Included).
  • Output: 1 x Toslink (Including Fiber Optic Cable), 1 x Coaxial..
  • 【High Sampling Rate】Supports Uncompressed 2-Channel LPCM Digital Audio Signal Output. Support Output Sampling Rate From 48 kHz to 96 kHz. Dolby Conversion Is Not Supported And Needs To Be Turned Off Before Use. (Note: Set The Connected Device to Support Audio Output Before Use, And Set The Audio Output To PCM Or LPCM. Because It Is Not Compatible With 5.1 Channel Signal, Such As Dolby Digital And DTS 5.1, Dolby-Ac3.).
  • 【Plug And Play】Simple to Install And Easy to Operate. No Installation Problem With Extra Drive. Powered by USB Cable. Suitable for PS3, PS4, Apple TV, Xbox, Blu-Ray Player, HD DVD, AV Amps, Etc..
  • 【Package】The Package Includes 1 x Analog to Digital Audio Converter, 1 x 1....
Check Stock