Reviews Cnc Plasma Cutter

AG60 SG55 WSD60 Air Plasma Cutter Torch Gun Completed Plasma Cutter Machine Non-Touch Pilot Arc Plasma Cutting Equipment WSD60 Torch Fit CUT50P CUT60P CT312P (3M 10ft)

  • AG60 SG-55 WSD60 Plasma Cutter Cutting Torch Gun Completed with pilot arc non-touch plasma cutter machine..
  • Rated welding current: 50-60A. The WSD60 plasma cutter is suitable for two-hole connection machines..
  • Fit for this Torch (gun) can be used for machines such as CUT50P CUT60P CT312P etc cnc machine.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Ar500 [Explicit]

  • ½” AR500 steel is a special high carbon steel hardened to withstand repeated shots, bullets bounce off or vaporize upon impact. Targets will last....
  • Takes rifle rounds up to .338 Lapua Magnum - Stay below 2850 fps at target to avoid pitting.
  • Precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets,....
  • Cleaned with an industrial deburring machine. Will have sharp edges.
  • Use ½” carriage bolt for mounting holes. (hardware not included).
Check Stock

WS SL60 SL100 Torch Start Cartridge 9-8213 9-8277 for Thermal Dynamics Cutmaster 38/52/82/102/152 Plasma Cutter Torch Consumables

  • Plasma consumable type : Start Cartridge.
  • The Start Cartridge Reference code : 9-8213 / 9-8277.
  • The Start Cartridge can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Start Cartridge can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8213 Start Cartridge are replacement parts which produced according to the standard size , and not original.
Check Stock

WeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]

  • The Shield Cap 9-8218 used for Drag cutting.
  • the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
  • The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Mophorn 50Amp Plasma Cutter, 110 220V Dual Voltage Plasma Cutting Machine, Max 12MM Thickness Clean Cut, Portable Plasma Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

  • Powerful Air Plasma Cutter: The Cut-50F plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs..
  • Compact & Portable: The inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take..
  • High Efficiency & Energy Saving: The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%..
  • Dual Voltage: The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed. High cutting speed and cutting smoothly..
  • Wide Application: This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc..
Check Stock

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2\ Clean Cut, CUT50D

  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use..
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered..
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself..
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and....
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock