Reviews Cnc Plasma Table Made In Usa

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

uxcell Roll-in Spring M6 T Nut, Roll Ball Elastic Nuts for 4040 Series Aluminum Extrusion Profile, Pack of 12

  • Made from carbon steel,have high hardness, surface is Nickel-plated for good rust resistance..
  • Used for T-slot aluminum profile 40x40 series..
  • Easy to be roll into T slot of aluminum profile..
  • Package Content: 12 Pcs x 4040 Series M6 Roll Ball Elastic T-Nuts..
  • 4040 Series Aluminum Profile T-Nuts widely Use to build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

Magnum Target 12” Tall IDPA/ISPC Steel Shooting Target 3/8' AR500 Range Target w/ T-Post Hook

  • Set includes (1) 7” x 12” 3/8" AR500 IDPA Hanger Target with a 5/8in. Diameter hole and (1) 3/8" AR500 Hanger T-Post Topper Hook..
  • These AR500 steel targets are great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Three eighths inch thick AR500 steel targets are rated to 3200 fps at 100 yards..
  • This target and hook are manufactured from new high quality 3/8 inch thick AR500 steel plate made in the USA..
  • These products are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process ensuring the longest life. Reversible steel target face doubles the life of the shooting target..
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock

Magnum Target AR500 Steel Shooting Target 3/8' Stringer Hostage Reactive Dueling Tree T-Post New

  • Set includes: (1) 3/8" 12x24 AR500 Shooting Target Body, (6) 3/8" X 4" AR500 Dueling Tree Swinging Tabs, and (1) T-Post Mount made from 3/8" AR500 with integrated hook for a hanger/gong..
  • Everything included is made entirely of 3/8" AR500 steel. T-Post not included. Our durable, 3/8" AR500 interlocking paddle rings allow for smooth and consistent paddle rotation. They are more durable and wear less over time compared to tube designs..
  • These AR500 steel targets are great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Three eighths inch thick AR500 steel targets are rated to 3200 fps at 100 yards. Steel shooting targets are manufactured from new high quality 3/8 inch thick AR500 steel plate made in the USA..
  • Steel shooting targets are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life..
Check Stock

Magnum Target Zipper 3/8' AR500 Steel Hostage Reactive Dueling Tree Shooting Target for T-Post New

  • Set includes: (1) 3/8" 10.5"X20" AR500 Shooting Target Body, (4) 3/8" X 4" AR500 Dueling Tree Swinging Tabs, and (1) T-Post Mount made from 3/8" AR500 with integrated hook for a hanger/gong..
  • Everything included is made entirely of 3/8" AR500 steel. T-Post not included. Our durable, 3/8" AR500 interlocking paddle rings allow for smooth and consistent paddle rotation. They are more durable and wear less over time compared to tube designs..
  • These AR500 steel targets are great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Three eighths inch thick AR500 steel targets are rated to 3200 fps at 100 yards. Steel shooting targets are manufactured from new high quality 3/8 inch thick AR500 steel plate made in the USA..
  • Steel shooting targets are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life..
Check Stock

Dreneco T-Slot Bolts Stainless Steel Hammer Head Bolt T Bolts for Woodworking, M8×50mm,3 pcs

  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Material: high quality nickel plated carbon steel.Antirust and long life. High quality T head screws for aluminium extrusions, suitable for 40mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

Magnum Target AR500 Combatant Steel Hostage Reactive IDPA Shooting Target 3/8 11x13 for T-Post

  • Set includes: (1) 3/8" 11X13 AR500 Combatant Shooting Target Body, (1) 3/8" X 4" AR500 Swinging Tab, and (1) T-Post Mount made from 3/8" AR500 with integrated hook for a hanger/gong..
  • Our durable, 3/8" AR500 interlocking paddle rings allow for smooth and consistent paddle rotation. They are more durable and wear less over time compared to tube designs..
  • These AR500 steel targets are great for most pistol (10 yards) and rifle calibers (100 yards), including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Three eighths inch thick AR500 steel targets are rated to 3200 fps at 100 yards..
  • Steel shooting targets are manufactured from new high quality 3/8 inch thick AR500 steel plate made in the USA. Steel shooting targets are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life..
Check Stock

M5 25]-T Bolt Aluminum Connector-T Head Screw-T Bolt-for 2020 Series T-Slot Aluminum Profile (50PCS)

  • Thread Diameter: 8mm (M8), Bolt length 16mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M5x12mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 20 Series Aluminum Profile 10pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 6mm (M6), Bolt length 12mm..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock