Reviews Cmos Display Module

Juried Engineering LM339N LM339 Quad Differential Comparator Industrial Grade Breadboard-Friendly IC DIP-14 (Pack of 5)

  • SINGLE-CHANNEL: TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V.
  • FRONT SHAPING MODULE: This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module.
  • CMOS AND TTL: Rail-to-rail output can directly drive a CMOS or TTL logic.
  • EASY TO OPERATE: Without threshold setting, the sine wave, square wave and triangular wave can be transformed into square wave, which can be used easily without debugging.
  • GREAT EXTENSIBILITY: At the same time, it has great extensibility, just change a small amount of the original.
Check Stock

Brandmotion 9002-8857V2 Rear Vision System with CMOS Infrared Camera and Adjustable Bracket for 2007-2018 Jeep Wrangler JK with Factory Display

  • Unique high mount camera system for Jeep Wrangler JK.
  • Fully adjustable camera bracket design to accommodate virtually any wheel design.
  • CMOS Infrared camera system allows you to have a bright, clear view even while backing up in low-light surroundings.
  • Includes a camera head extension to accommodate offset wheels.
  • Includes an RCA jumper harness to connect to factory display and flash module to activate camera input for radio.
Check Stock

2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera

  • Nice performance: the IR-Cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video.
  • Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
  • IR-CUT camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
  • CMOS sensor interface: the camera module adopts appropriative CMOS sensor interface (CSI), via the CSI bus.
  • A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor.
  • Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + (except Pi Zero/ Zero W).
  • Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light.
  • The brightness of infrared light will adjust automatically based on the dark of the circumstances.
Check Stock

OCESTORE USB Isolator Module ADUM3160 USB to USB Voltage Isolator Board USB Digital Isolation Protection with OC Protection 5KV ESD MAX

  • 【OPTIMAL PERFORMANCE】OCESTORE premium upgrade USB Isolator Module adopts Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics and is easily integrated with low and full speed USB-compatible peripheral devices..
  • 【HIGH QUALITY】OCESTORE premium USB Isolator Module is made of high quality material which can use for a long time.Note: USB Isolator Module can't work for USB 2.0 High Speed Devices.Only work for USB1.0 USB 1.1 USB2.0 Devices..
  • 【SUPER IMPORTATNT】OCESTORE premium USB Isolator Module can widely compatible with A variety of industrial USB devices Noise sensitive areas.1W MAX. Low and full speed data rate: 1.5 Mbps and 12 Mbps.
  • 【WIDE APPLICATION】OCESTORE premium USB Isolator Module is widely used in Electronics，Computers，Accessories，Computer Accessories，Peripherals，Computer Cable Adapters，USB-to-USB Adapters..
  • 【PACKAGE & SERVICE】Package Include: 1 Pcs x USB Isolator Module .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

100fps 1.56mm Fisheye Lens USB Camera 1/2.7' CMOS OV2710 Web Cam Full HD 1080P USB with Camera Mini Infrared Night Vision USB2.0 Web Camera with IR Cut and 10pcs Led Board for Android Windows Linux

  • FULL HD 2mp 1080P Fisheye Day Night USB WEBCAM:The streaming night vision camera usb provides incredibly sharp 1080p to capture crystal clear images and records 1080@30fps video,used for all kinds of machine as below: machinery equipment,all-in-one machine,POS equipment,STB,smart box TV BOX,advisement player,LED display,automatic vending machine,safety box,notebook,video door phone,MID,Tablet external,evaluator,Medical Equipment,on-the-spot law enforcement,etc..
  • High speed USB 2.0 interface Fisheye Day Night USB Camera Mini Webcam: High speed USB 2.0 interface for connection with PC computer,laptop,tablet,High frame rate: 30fps@1080P/60fps@720p/480p@100fps,usb connecting port in this camera,usb 2.0 data transmission,occupy less bandwidth,greatly improved the working efficiency,Webcamera_usb usb camera also support OTG protocol(UVC),2mp,Max resolution:1920*1080P,White balance Function:Excellent indoor and outdoor effects,vivid colors. .
  • MJPEG/YUY2 Compression Format 2mp Fisheye Night Vision Camera with 10pcs led Lights: High Speed 1080P HD IR Infrared USB Camera with mini metal housing,1080p usb camera with MJPEG/YUY2 compression format help to save more storage space,streaming with less demand on your computer provides faster and smoother video upl....
Check Stock

ACEIRMC 4pcs Si7021 GY-21 SHT21 HTU21 Digital Humidity Temperature Sensor Module Replace SHT11 SHT15

  • The humidity and temperature sensor board that carries a digital SHT21 humidity and temperature sensor from Sensirion..
  • Si7021 GY-21 Module Industrial High Precision Humidity Sensor I2C IIC Interface Module For Arduino Low Power CMOS IC Module.
  • It has a 4-pin interface that can communicate directly with the analog pins.
  • It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/temperature sensors in 3x3 mm DFN-6 packages, featuring precision sensing over a wider range and lower power consumption..
  • The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms..
Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

  • ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
  • ♛ The Display Module can support analog S P I and hardware S P I.
  • ♛ The Display Module is designed with one socket for sd card.
  • ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
  • ♛ This is a new 2.8 inch serial S P I color display module without touch function.
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

FDSF Diy In12 In-12 Nixie Tube Pcba Kit Digital Clock Beautiful Gift,No Tubes

  • 2.12/24 hour module: Click "Up" key to change.
  • 3.Sleep module. Long Press "UP", while no display , into sleep module(22:00~07:00 no display. 07:00~22:00 display). Display all "0"number,out of sleep module..
  • 1.Set : Long Press "Down" key into setting . Click "Up","Down" to select , and Long Press "Down" key to finish..
  • 4.Set back color: Click "Down" to change color. when color refresh that means it is into change color automatic (every day change one color),or color is fixed..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Ximimark 1PCS 5V 12864 LCD Display Module 128x64 Dots Graphic Matrix LCD Blue Backlight

  • 12864 LCD Display Module 128x64 Dots Graphic Blue Color Backlight.
  • This product is a LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
  • Package included： 1PCS x 5V LCD Display Module 128x64 Dots Graphic Matrix LCD 12864 Blue Backlight New.
  • If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply..
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock

High Speed Comparator High Speed Frequency Meter Front Shaping Comparator for Low-Voltage Applications Conversion Circuit

  • LOW VOLTAGE APPLICATIONS -- The input common mode range is better than the swing input, which is very suitable for low voltage applications..
  • APPLICATION -- Digital module can be used for wide voltage range and periodic signal shaping..
  • FRONT END ADJUSTMENT -- Used as a front end conditioning module in time domain measurements for frequency and phase difference..
  • PARAMETER -- The input voltage is 10 to 1000mV, the input frequency is about 200MHz DC, and the input impedance is 50 ohms..
  • RAIL TO RAIL OUTPUT -- The output level mode is rail to rail output, which can directly drive TTL / CMOS level..
Check Stock