Reviews P10 Led Display Module

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • 【Great Value Combination - ATEZR P10 COMBO】P10 laser cutter and engraver machine comes standard with 1 air assist (KA) and 1 high density aluminum roller(KR). The 30L+/min air assist blows away the high temperature smoke generated during laser operation through the unique air duct built into the laser module, which helps to engrave more delicate models. You can use the roller to engrave objects with diameters from 2mm-150mm, such as goblets, skateboards, pencils, etc.
  • 【Stability and Efficiency】The Atezr P10 laser engraving machine is made of high-density aluminum alloy. It can ensure engraving accuracy and stability even at a high speed of 24,800mm/min, and save nearly 40%-80% of working time. The engraving area of Atezr P10 engraving machine is increased to 430mm*430mm, which can engrave larger materials.
  • 【Powerful Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutti....
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Nitecore P10 V2 1100 Lumen Tactical Flashlight with Hard Holster and Two LumenTac Batteries

  • COMPACT TACTICAL FLASHLIGHT - The P10 v2 emits 1100 lumen output and reaches up to 220 yards of throw with the latest Cree XP-L2 V6 LED..
  • GREAT FOR DUTY OR EDC - The P10 v2 maintains an even 1'' diameter for easy handling, and is lightweight enough to carry daily with the included NTH10 hard holster..
  • VERSATILE BATTERY OPTIONS - The P10 v2 operates on a single rechargeable battery or 2x CR123A batteries, incredibly versatile and widely compatible..
  • CUSTOMIZABLE OPERATION - Select tactical mode, law enforcement mode, or daily mode to customize your operation based on your needs but never lose your direct access to strobe function..
  • P10 V2 STARTER KIT - Included in this bundle is a new P10 v2 from NITECORE, an NTH10 hard holster, battery adpater sleeve, and 2x CR123a batteries..
Check Stock

4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)

  • [Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
  • [Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
  • [Easy to Use] The clock module connected to digital I/O via 2 pins..
  • [Easy to Install] This LED display designed with 4 mounting holes for easy installation..
  • [High Quality] The clock module is made of high quality electronic components, stable and reliable performance.
Check Stock

LED Driver 200 Watts 24V DC Low Voltage Transformer， Waterproof IP67 LED Power Supply, Adapter with 3-Prong Plug 3.3 Feet Cable for Any 24V DC led Lights, Computer Project, Outdoor Light

  • High quality Switch Power Supply, 100% pure copper core and coil ensure efficient, steady and reliable working. Efficiency up to 85%..
  • Reliable quality, has passed FCC,CE certification..
  • Smart protection: over-voltage protection, overload protection, overheat protection and short-circuit protection..
  • Professional power supply for LED Display Board P2 P3 P4 P5 P6 P7 P10 P12 P20 F5 F3.75 ,WS2812B WS2811 WS2801 APA102 SK6812 SK9822 etc..
  • Widely used in LED display, LED Strip, audio power amplifier, billboard etc.
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

PHEVOS 5V 40A 200w Switching Power Supply, Brass Material Transformer AC 110V to DC 5 Volt for CCTV, Radio, Computer Project, WS2811 2801 WS2812B APA102 SK6812 led Pixel Lights（5V40A

  • High quality Switch Power Supply, 100% pure copper core and coil ensure efficient, steady and reliable working. Efficiency up to 85%..
  • Reliable quality, has passed FCC,CE certification..
  • Smart protection: over-voltage protection, overload protection, overheat protection and short-circuit protection..
  • Professional power supply for LED Display Board P2 P3 P4 P5 P6 P7 P10 P12 P20 F5 F3.75 ,WS2812B WS2811 WS2801 APA102 SK6812 SK9822 etc..
  • Widely used in LED display, LED Strip, audio power amplifier, billboard etc.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

  • 4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
  • AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
  • Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
  • Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
  • Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
  • Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

45w USB-C Chromebook Charger Laptop for HP Lenovo Acer Asus Dell Samsung Google Chromebook Computer Fast Charging Power Adapter - 45W

  • Input voltage:100-240v 1.3A (50-60Hz) / Type-C Charger 45W: Output:20V-2.25A 15V-3A 9V-3A 5V-3A.(CE Certificated).
  • TYPE /USB C Charger for HP Chromebook X360 14-CA000 11-AE000 14-ca061dx.
  • Elite X2,Pavilion X2,Pro 2 :HP Pro x2 612 G2 table.
  • HP Pavilion X2 12-B000 10-N000 10-P000 Series.
  • HP Spectre x2 12-A 12-AB Series,X360 13-W 13-w060nz 13-w063nr ,13-V Series.
  • Also compatible with ASUS Transformer 3pro T303UA 12.6" Xiaomi Air 12.5" Xiaomi Air 13 Sharp FS8010 Huawei P10 Huawei P10 Plus Huawei Mate9 Pro Ipad Pro 2017 HP Spectre 13 Xiaomi 6 Nubia Z17 Meizu Pro6 Plus Le Max2 TI TPS65982 Evaluation Module VIA dock Lontium dock Fresco dock Nintendo Switch Apple Macbook ProA1707 ZMI Power Bank QB820 Google Pixel Apple A1621 Huawei Mate9 Apple Macbook A1534.
  • Package: 1x Ac adapter & 1x Ac power cable..
  • Type-C port output up to 45W Power Delivery enables fast and efficient charging of compatible devices. Multi-Protection.
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock