Reviews Clutch Pressure Plate

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

(4 Pack) 3/4" Wood Gluing Pipe Clamp Set Heavy Duty PRO Woodworking Cast Iron

  • Four plate clutch for high clamping pressure, quick release.
  • This clamp is limited only by the length of the pipe you supply.
Check Stock

Steel 26 Spline Clutch Alignment Tool

  • Widely Application: This correction tool is very suitable for use on most cars and is very practical..
  • The Scope of Work: The range of the calibration tool for automotive clutch vacancy is 14.4-2120.9-29mm..
  • Premium quality Material: Clutch Plate Alignment is made of material of plastic, not easy to damage the equipment, and avoid unnecessary losses..
  • Product Introduction: This tool can quickly complete the work of adjusting the clutch and pressure plate with one hand before assembly..
  • Pretest: This has been thoroughly quality tested before shipping to ensure product perfect. If you are not satisfied, we accept all of the return, replacement or refund requests..
Check Stock

Valeo Premium Clutch Kit 832226

  • Valeo Premium Clutch Kits are engineered using only the highest quality components and latest technology for exceptional operation and reliability.
  • Premium Friction Material for Increased Durability:  Valeo friction material is known as the best in the world, providing better heat dissipation and....
  • Consistent Comfort:  Enhanced damper technology for improved filtration of noise, vibration and harshness maintaining the comfort of the original....
  • This kit includes a clutch cover (pressure plate), clutch disc and release bearing.
Check Stock

ClutchMaxPRO Heavy Duty OEM Clutch Kit with Flywheel with Slave Cylinder Compatible with 2013-2015 VW Beetle 2010-2015 Golf 2009-15 Jetta 2012-15 Passat TDI 2.0 Turbo Diesel (CP02157HDWSFW-CK)

  • INDUSTRY LEADING CUSTOMER SUPPORT: We offer industry's best technical support to ensure 100% satisfaction.
  • KIT INCLUDES: HD Nodular Solid Flywheel (replaces heavy and inconsistent factory dual mass flywheel), HD Premium Pressure Plate, HD Premium Sprung Hub Clutch Disc (9-7/16" (240 mm) x 15/16" (23.8 mm) x 23 spline), CSC Slave Cylinder Bearing Assembly, A set of 6 each flywheel mounting bolts, A set of 6 each pressure plate mounting bolts, Alignment Tool and Installation Guide *Note: Clutch and flywheel must be used together as a set without reusing existing components..
  • LIMITED WARRANTY: All ClutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH:​​​​​​ 2013 - 2015 VW Beetle TDI (2.0L DOHC 4cyl Turbo Diesel), 2010 - 2015 VW Golf TDI (2.0L DOHC 4cyl Turbo Diesel), 2009 - 2015 VW Jetta TDI (2.0L DOHC 4cyl Turbo Diesel), 2012 - 2015 VW Passat TDI (2.0L DOHC ....
Check Stock

Complete Tractor 1112-5989 Clutch Kit Brown

  • Specs: Clutch Kit, Type: Single, Disc Outside Diameter: 10", Spline Count: 15, Includes: Pressure plate, disc, release bearing, pilot bearing and....
  • Compatible with/Replacement for Ford/New Holland: NDA7550B, NDA7563A.
  • Compatible With / Replacement For: Ford/New Holland 1801 Indust/Const.
  • 100% New aftermarket Clutch Kit built to meet OEM specifications for Ford/New Holland.
Check Stock

Bower/BCA 202FF Brng

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619004 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines.
  • To ensure the highest level of quality every clutch design that Centerforce offers is run through a gauntlet of testing procedures We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements.
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs This coupled with precise measurement and strict manufacturing control means you get parts right - the first time.
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet but also exceed industry standards.
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD mutli-disc coupling system.
Check Stock

Rareelectrical VALEO TYPE ALTERNATOR COMPATIBLE WITH VOLVO PENTA MARINE 8.1GXI GXIL GI GIL OSIIPS500G GAS 3884950

  • Engineered using only the highest quality components and latest technology for exceptional operation and reliability.
  • Premium Friction Material for Increased Durability: Valeo's premium friction provides better heat dissipation, preventing premature failure.
  • Consistent Comfort: Enhanced damper technology for improved filtration of noise, vibration and harshness maintaining the comfort of the original clutch.
  • Kit contents include: Clutch Disc, Clutch Cover (Pressure Plate), Release Bearing, Alignment Tool.
  • Trusted by major vehicle manufacturers (OE) and aftermarket industry professionals worldwide, Valeo combines its signature engineering and advanced design to deliver uncompromising performance and quality.
Check Stock

Centerforce 50058 Centerforce ® Accessories, Clutch Alignment Tool \90-97 Honda Accord 2.2L 5-Spd\

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Four Seasons (47654) A/C Clutch Assembly

  • Feature: The three main parts of the compressor clutch assembly are the coil magnet, the pulley, and the clutch plate. The clutch drive plate is splined to the input shaft of the compressor..
  • Package Included: 1 x Pulley With Bearing.
  • (Professional Installer is Highly Recommended ).
  • Pulley Assembly Width:10.4cm,Height:2.8cm.
  • Part#: 140162C,7511699,10759C,F09OGBC003,5511699,6511699.
Check Stock