Reviews Clutch Friction Plate

Valeo 52255602 Solid Flywheel Conversion Kit

  • Provides a high performing and efficient solution for replacing the dual mass flywheel (DMF), this innovative solution replaces the DMF with a solid....
  • Premium Friction Material for Increased Durability: Valeo's enhanced F510 friction material is composed of an organic compound and higher copper....
  • Consistent Driver Comfort: The long travel damper technology consists of a specific friction plate with a higher damper capacity for improved....
  • Maximum Torque Transfer: Due to the flywheel's solid composition, combined with the increased clamp load of the Clutch Cover (Pressure Plate), this....
  • Simple Bolt-on Installation: No special tools or pre-loading required.
Check Stock

Rareelectrical VALEO TYPE ALTERNATOR COMPATIBLE WITH VOLVO PENTA MARINE 8.1GXI GXIL GI GIL OSIIPS500G GAS 3884950

  • Engineered using only the highest quality components and latest technology for exceptional operation and reliability.
  • Premium Friction Material for Increased Durability: Valeo's premium friction provides better heat dissipation, preventing premature failure.
  • Consistent Comfort: Enhanced damper technology for improved filtration of noise, vibration and harshness maintaining the comfort of the original clutch.
  • Kit contents include: Clutch Disc, Clutch Cover (Pressure Plate), Release Bearing, Alignment Tool.
  • Trusted by major vehicle manufacturers (OE) and aftermarket industry professionals worldwide, Valeo combines its signature engineering and advanced design to deliver uncompromising performance and quality.
Check Stock

EBC DRC Series Clutch Kit for Honda TRX-400EX 99-08 400X 09

  • Anti-swell, alloy-impregnated heavy-duty cork-based facings for smooth clutch take-up.
  • Allow modulation, unlike paper clutches that tend to snatch.
  • Complete engine set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack....
  • Built with swagged aluminum carriers that spread the load on the clutch basket and prevent clutch basket dogging.
Check Stock

4 of Slip Clutch Friction Disc Plate ID 3" w/ 5.5" OD & Thickness of 0.125" Farmer Bob's Parts FP5530-FBA

  • NOT OEM For PTO Driveshaft Slip Clutch Friction Disc, ID of 3.00" w/ 5.50" OD, & Thickness of .125".
  • 225-5530, 2255530, 247006251, 5010453, 919-FP5530, 9561620, FP5530, W41487.
Check Stock

ZeeKee Clutch Kit Heavy Duty Springs And Clutch Cover Gasket Compatible with Yamaha Warrior 350 YFM350 Raptor 350 YFM350 Big Bear YFM350

  • ★ Clutch plates kit compatible with yamaha big bear yfm350fw 1987-1998, for moto-4 1987-1995, for kodiak yfm400 1993-1998, for raptor 350 yfm350r 2004-2013, for warrior 350 yfm350x 1987-2004..
  • ★ Compatible with yamaha warrior 350 clutch parts, for big bear yfm350 clutch kit, for kodiak yfm400 clutch kit, for raptor 350 clutch kit, for moto-4 yfm350er clutch kit..
  • ★ Clutch friction plate kit (6 steels plates + 7 fibers plates + 6 springs + 1gasket)..
  • ★ Each part is manufactured using the best materials and high technology to assure long engine life and the most efficient performance..
  • ★ We provide 100% perfect customer service, please contact us by email if you have any question!.
Check Stock

4 of Slip Clutch Friction Disc Plate ID 3.594" w/ 6" OD & Thickness of .125" Farmer Bob's Parts FP6035-FBA

  • NOT OEM For PTO Driveshaft Slip Clutch Friction Disc, ID of 3.594" w/ 6" OD, & Thickness of 0.125"..
  • 00754202, 042480, 125-822, 125822, 225-6035, 2256035, 36F70, 754202, 76083, 919-FP6035, 970-0153, 9700153, DY10734, FP6035, HA00302, W34913.
Check Stock

Bower/BCA 202FF Brng

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Barnett Performance Products Extra-Plate Clutch Kit 307-30-20011

  • More clutch plate surface area helps eliminate slippage.
  • Bar-Flex oil-resistant friction material can be run wet or dry.
  • Consists of 9 friction plates and 8 steel drive plates.
Check Stock

Ultra1Plus™ ATF Dexron III/Mercon Transmission Fluid Multi-Purpose (4)

  • ✅ Extended friction durability prolongs transmission life and promotes smooth shifting..
  • ✅ Increased resistance to oil oxidation and degradation..
  • ✅ Increased clutch band and clutch pack capacity..
  • ✅ Improved protection of copper and bronze components..
  • ✅ t is compatible with gaskets, rubber bands, plate seals and discs made with elastomers and other seal materials..
Check Stock

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619004 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines.
  • To ensure the highest level of quality every clutch design that Centerforce offers is run through a gauntlet of testing procedures We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements.
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs This coupled with precise measurement and strict manufacturing control means you get parts right - the first time.
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet but also exceed industry standards.
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD mutli-disc coupling system.
Check Stock

Ultra1Plus™ ATF Dexron III/Mercon Transmission Fluid Multi-Purpose (5 Gallon Pail)

  • ✅ Extended friction durability prolongs transmission life and promotes smooth shifting..
  • ✅ Increased resistance to oil oxidation and degradation..
  • ✅ Increased clutch band and clutch pack capacity..
  • ✅ Improved protection of copper and bronze components..
  • ✅ t is compatible with gaskets, rubber bands, plate seals and discs made with elastomers and other seal materials..
Check Stock

Centerforce 50058 Centerforce ® Accessories, Clutch Alignment Tool \90-97 Honda Accord 2.2L 5-Spd\

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock