Reviews Clamping Force

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Tripod Clamp Mount, Lab Stand Holder Cross Clip, for Experiment Laboratory

  • ADJUSTABLE TONG OPENING: Because of flexible tong opening, the condensing tube clamp can be used in different specifications of the lab instrument..
  • STRONG CLAMPING FORCE: The four-claw lab clamp features strong clamping force, which makes sure that the experiment supplies held by the clamp will not fall..
  • FLEXIBLE HANDLE: The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
  • FOUR CLAW DESIGN: The beaker clamp adopts four-claw design, which improves its clamping force..
  • APPLICATION: The condensing tube clamp is suitable for clamping various lab supplies such as condenser pipe, flask, etc..
Check Stock

TOLESA 7 Inch Spring Clamps for Woodworking 4PC Large Wood Clamps with 30 Lbs Powerful Clamping Force Reinforced Plastic Nylon Clamps 3 Inch Jaw Opening Clamps with Heavy Duty Spring for Gluing Crafts

  • 【Powerful & Long-Lasting Clamping Force】 - 7 Inch spring clamps with tempered steel coil spring with larger diameter and more loops provides clamping force up to 30 lbs, holding objects strongly by generating a large amount of clamping force. And the clamping force of the clamps for woodworking lasts up to 72 hour, perfect for wood gluing and securing.
  • 【Extra-Wide Jaw Opening】 - the wood clamps for woodworking comes with 4 piece and to meet DIYers and professional needs, large spring clamps for crafts have maximum jaw opening up to 3 inch perfect for thicker materials and wood chip.
  • 【Comfortable & Ergonomic Design】 - heavy duty nylon spring clamps for backdrop stand made of reinforced fiberglass with great finish and comfortable to grip because of double layer TPR handle with ergonomic design.
  • 【Flexible Jaw Pads】 - plastic spring clamps with wide pivoting jaw pads self-adjust to uneven surfaces for a good match and solid grip. Woodworking clamps can also protect work surface very well. Package includes extra three replaceable pads for free.
  • 【Wide Applications】 - With powerful clamping force and heavy duty spring, clamps heavy duty perfect for woodworking projects from small to big projects. And with easy to operate, the s....
Check Stock

GYZJ 6" Cross Slide Vise Drill Press Milling Vise, 6 in Jaw Width , 6.1 in Max Jaw Opening, Bench Mount Clamp Machine Vice Holder Clamping Tool for CNC Woodworking Milling Machine Drill Press

  • [Premium Quality Structure ]- The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Strong clamping force, not easy to move, operated simply..
  • [Smooth Guide Rail] - The guide rail surface is finely ground, and the parallelism is 0.1mm, very smooth and flat.The contact with the parts could be more precise, and the movement is smooth without jamming..
  • [Powerful Clamping Force] - The mill vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 29 KN, Jaw width: 6", Max Jaw opening: 6.1"..
  • [Flexible Handle]-The handle rotates naturally and smoothly. Pursue precision in production process, which made the contact surface finely polished, reduces the jam during use greatly and the vise jaw can be easily adjusted..
  • [Wide Application] - Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Most work of the fitters can be completed by using this clamping vise such as sawing, filing, chiseling and some assembly and removal jobs..
Check Stock

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Rockwell JawHorse Portable Material Support Station – RK9003, Black and green

  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools.
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method.
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot.
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects.
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would.
  • [EASY TO MOVE] Easy to store. With quick-release leg latches the JawHorse quickly folds down and unlockable wheels make it easy to push.
  • Hands-free clamping and foot-pedal operated for up to 1-ton clamping force.
Check Stock

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5 Ductile Iron

  • Jaw width:125mm(5"), Opening: 125mm(5"), Throat Depth: 67mm(2.6"), Clamp force: at least 5500lbs.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise.
  • Great for clamping and fixing workpiece: Higher clamping force.
  • 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 5" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works.
Check Stock

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

  • Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
  • Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
  • The handle of stamped steel plate, clamping object without deforming.
  • The heat treatment adjusting rod is easy to adjust the suitable size.
  • Additionally, the serrated jaw of locking C clamp has a strong clamping force.
  • Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
  • The quick release handle is convenient and labor saving.
  • Moreover, the spring provides good tensile force.
  • Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
  • Since the jaw can generate large clamping force, the clamped objects will not loosen.
  • Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
  • And woodworkers can use this metal tool to quickly clamp boards or frames.
Check Stock

Forward HY-DT150B-6IN Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (6")

  • Jaw width:152.4mm(6"), Opening: 125mm(5"), Throat Depth: 66.6mm(2 5/8"), Clamp force: at least 5500lbs.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength cast iron and ductile iron.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise.
  • Great for clamping and fixing workpiece: Higher clamping force.
  • 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 6" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works.
Check Stock

Amazon Basics 6-Piece Trigger Clamp Set - 2 Pieces 4-Inch, 4 Pieces 6-Inch

  • 6-piece trigger clamp set includes 4-inch clamps (x2) and 6-inch clamps (x4).
  • 4-inch clamp delivers 22 pounds of clamping force.
  • 6-inch clamp delivers 100 pounds of clamping force.
  • Made of durable nylon with hardened-steel bars to resist bending.
  • Non-marring pads provide a firm grip and protect surfaces from damage.
  • one-handed trigger for instant clamp release.
  • Ideal for clamping smaller pieces and for working in confined spaces.
  • backed by an Amazon Basics 1-year limited warranty.
Check Stock

1-Ton Clamping Force Portable Material Support Station (440 LB)

  • Replace your workbench, sawhorse, clamps, bench vice and more - just set it, lock it, and clamp your way to hands free support for your projects.
  • One metric ton of clamping force holds your projects up and off the ground to a more comfortable working height and allows you to work more safely.
  • Solid steel construction provides rigidity and strength, supporting up to a 440-lb. load. Hands-free clamping and foot-pedal operated for up to 1-ton clamping force. Jaws extend a full 37-Inch..
  • Foot pedal lever creates a hands-free work station, folds and rolls for portability and storage.
  • Simply clamp an ordinary piece of plywood into the JawHorse and you have a perfect workbench.
Check Stock