Reviews Ultimate Clamping Strength

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

Pyatofyy 4 Pack T-Track Clamp, T Track Hold Down Clamps Kit Compatible with 3018-,3018-PROVer,1810- CNC Router Machine

  • Adjustable 3 gears, high, medium and low, different clamping force suitable for different working condition..
  • Constructed of high quality aluminum alloy and stainless steel provides the hold fast clamps with maximum durability and strength..
  • Maximum clamping is 60mm, the clamping height can be adjusted according to the thickness of the board..
  • Quick and easy clamping,slide the bench hold down clamp into your workbench dog hole, hold wood in place and then press the gear,easier clamping,reduce hand fatique.
  • Use with your workbench,works best on workbenches 20~40mm thickness(maximum clamping 60mm),Drill a suitable vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole..
Check Stock

Bessey VAS23 Vario Angle Strap Clamp

  • Make difficult frame and furniture clamping easy with the Bessey® Band spanner high-torque clamping system.
  • This product is easy to use easy to install and highly durable.
  • A retractable 7-meter polyester tensioning band offers exceptional clamping power.
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5 Ductile Iron

  • Jaw width:125mm(5"), Opening: 125mm(5"), Throat Depth: 67mm(2.6"), Clamp force: at least 5500lbs.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise.
  • Great for clamping and fixing workpiece: Higher clamping force.
  • 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 5" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works.
Check Stock

Forward HY-DT150B-6IN Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (6")

  • Jaw width:152.4mm(6"), Opening: 125mm(5"), Throat Depth: 66.6mm(2 5/8"), Clamp force: at least 5500lbs.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength cast iron and ductile iron.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise.
  • Great for clamping and fixing workpiece: Higher clamping force.
  • 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 6" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works.
Check Stock

Head Stud Replacement Kit for 7.3L 1993-2002 Ford Power Stroke Diesel CP879

  • ...city. Please see vehicle compatibilities above to ensure accurate fitment..
  • ULTRA STRENGTH - XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs. Rated at 220,000 psi tensile strength. Threads rolled after heat treatment for optimum fatigue strength. Ample clamping strength prevents cylinder heads from lifting..
  • EASY INSTALLATION - Broached stud ends install & make cylinder head removal easier. Installation manual is included with drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts..
  • KIT INCLUDES - 36x Heads Studs, 36x Nuts, 36x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings..
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards..
Check Stock

POWERTEC 71523 Wooden Handscrew Clamp – 8 Inch | Hand Screw Clamps for Woodworking 2PK

  • INCLUDES: (2) 8-Inch Wood Handscrew Clamp for Woodworking.
  • FUNCTION: Provides exceptional clamping action with a reliable secure grip, locking your work material into position.
  • FEATURES: Acme thread technology for sturdy quick clamping, along with large diameter spindles made with stainless steel for added strength,....
  • PERFECT HANDLE: Reinforced with steel ferrules, the large hardwood handles feature an ergonomic design built for comfort, extra torque and superior....
  • VERSATILE: This handscrew wood clamp has an adjustable 3” clamping range for an assortment of projects, plus a non-marring clamp jaw gentle enough....
Check Stock

1-Ton Clamping Force Portable Material Support Station (440 LB)

  • Replace your workbench, sawhorse, clamps, bench vice and more - just set it, lock it, and clamp your way to hands free support for your projects.
  • One metric ton of clamping force holds your projects up and off the ground to a more comfortable working height and allows you to work more safely.
  • Solid steel construction provides rigidity and strength, supporting up to a 440-lb. load. Hands-free clamping and foot-pedal operated for up to 1-ton clamping force. Jaws extend a full 37-Inch..
  • Foot pedal lever creates a hands-free work station, folds and rolls for portability and storage.
  • Simply clamp an ordinary piece of plywood into the JawHorse and you have a perfect workbench.
Check Stock

POWERTEC 71524 Wooden Handscrew Clamp – 10 Inch | Hand Screw Clamps for Woodworking, 2PK

  • INCLUDES: (2) 10-Inch Wood Handscrew Clamp for Woodworking.
  • FUNCTION: Provides exceptional clamping action with a reliable secure grip, locking your work material into position.
  • FEATURES: Acme thread technology for sturdy quick clamping, along with large diameter spindles made with stainless steel for added strength, durability and anti-corrosive properties.
  • PERFECT HANDLE: Reinforced with steel ferrules, the large hardwood handles feature an ergonomic design built for comfort, extra torque and superior control.
  • VERSATILE: This handscrew wood clamp has an adjustable 3” clamping range for an assortment of projects, plus a non-marring clamp jaw gentle enough for delicate furnishings, and rugged enough for tougher stock.
Check Stock

POWERTEC 71525 Wooden Handscrew Clamp – 12 Inch | Hand Screw Clamps for Woodworking, 2PK

  • INCLUDES: (2) 12-Inch Wood Handscrew Clamp for Woodworking.
  • FUNCTION: Provides exceptional clamping action with a reliable secure grip, locking your work material into position.
  • FEATURES: Acme thread technology for sturdy quick clamping, along with large diameter spindles made with stainless steel for added strength, durability and anti-corrosive properties.
  • PERFECT HANDLE: Reinforced with steel ferrules, the large hardwood handles feature an ergonomic design built for comfort, extra torque and superior control.
  • VERSATILE: This handscrew wood clamp has an adjustable 3” clamping range for an assortment of projects, plus a non-marring clamp jaw gentle enough for delicate furnishings, and rugged enough for tougher stock.
Check Stock

Wilton 845M Mechanics Pro Bench Vise, 4-1/2' Jaw Width, 4' Jaw Opening (28810)

  • ULTIMATE DURABILITY: 60,000 psi ductile iron movable jaw and base..
  • SMOOTH OPERATION: Inclosed spindle keeps lubricants in and contaminants out..
  • LARGE ANVIL WORK SURFACE: Accommodates a wide range of striking needs..
  • ELIMINATES MOVEMENT: Precision-machined slide bar eliminates movement in the front jaw, regardless of opened distance..
  • GREATER CLAMPING FORCE: Needle roller thrust bearing makes it Easier to apply and release greater clamping force..
Check Stock