Reviews Clamp Mounted

ROCKBROS Bike Repair Stand Wall Workbench Mount Rack Workstand Bike Clamp Height Adjustable Home Bicycle Maintenance Rack Bike Repair Rack for Road Mountain Bikes

  • Stably Mounted: The wall mount bike repair stand is secured by four long screws and can be mounted stably and easily. The wall mounted bike clamp acts like a strong arm with a firm grip, holding your bike in a fixed position as long as you need so you can clean or repair bike easier..
  • Adjustable Clamp: 360 degrees rotating clamp can hold your bicycle steadily, allows your bike to be held in any angle. Clamp material has a certain softness and protect your bike frame well..
  • Height Adjustable: Made of telescopic design, the height of the bike repair stand can be adjusted from 39cm/15.35inch to 55cm/21.65inch simply, suitable for mountain road bikes, also perfect for small bikes such as balance bikes..
  • Durable Materials: Made of iron, this home bike maintenance rack is durable for long time. With wall fixed design, the wall beach mount repair stand can support general maintenance and cleaning work.(Tips: Hold up to 20kg/44lbs mounted on work bench, less than 20kg/44lbs mounted on wall.).
  • Space Saving: You can choose to install the bike repair stand to the wall or work bench, even post or on the ground. It locks in place against the wall and uninstall arms when not in use, takes up less space and is more convenient to keep at home..
Check Stock

Kreg K5 Pocket-Hole Jig

  • The new Kreg Jig K5 is packed with features your are sure to appreciate.
  • It comes with a convenient front-mounted clamping handle, and it's connected to a ratcheting clamp mechanism that adjusts without tools or lock nuts.
  • The quick-release Drill Guide Block makes set up simple.
  • Front-mounted clamp handle makes clamping easy.
  • Ratcheting clamp mechanism adjusts without tools.
  • Quick-release pin holds drill block in place, and can't get lost.
  • Storage Wings provide built-in storage for bits, screws, accessories.
  • Stop-Collar Setting Block makes drill bit setup easyDescriptionThe New Kreg Jig K5 Is Packed With Features Your Are Sure To Appreciate. It Comes With A Convenient Front-Mounted Clamping Handle, And It'S Connected To A Ratcheting Clamp Mechanism That Adjusts Without Tools Or Lock Nuts. The Quick-Release Drill Guide Block Makes Set Up Simple, And The Removable Support Wings Support Large Work Pieces And Provide Additional Storage Inside. Dust-Collection Is Also Standard, With A Swiveling Dust-Collection Port For Ease Of Use. Adding In The Adjustable Workpiece Stop, Hex-Shank Drill And Driver Bits, A Screw-Selection Chart, And The Durable Construction You Expect From Kreg, And You Have The Most Advanced Kreg Jig Yet..
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

10 Pack Hold Down Toggle Clamps Woodworking,201B Clamps Hand Tool Toggle Clamp 220Lbs Holding Capacity,Antislip Quick Release Horizontal Toggle Clamp,Heavy Duty Toggle Clamp for Cam Over Clamp-SKYCY

  • Quick Release Clamp:Cam clamp quick release toggle clamps for holdfast woodworking.Cam lever hold down clamp for cnc workholding clamps.Vertical clamp with non-slip oil and stain-resistant red vinyl solid handle is easy for woodworking clamps hand tool..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material: Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Size Spesifics : 5.90 * 3.74 * 1.41 inches. screw: M6 * 45..
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

  • ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
  • Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
  • ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
  • The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
  • ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
  • ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock

ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes

  • Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand..
  • Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish..
  • Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze..
  • Durable Materials: The bike stand for maintenance is made of iron, durable for long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds).
  • Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value..
Check Stock

The Mic Clip - Best Police Radio Mic Clip by Mic+Tight

  • . It is simple and convenient, and microphone adjustment of these be carried out without disturbing the microphone stand.
  • . It is simple solution for micing these drums without the hassle of floor mounted mic stands.
  • . The clamp has some design and 3 groove points that allow it to suit a wide variety of tom and snare drumsand desired mic positions.
  • . This drum clamp can be mounted to the rim of most snare and tom drums.
Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

  • 【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
  • 【Holding Capacity】27Kg / 60Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

iPad X-Clamp with Suction Cup car Plane Mount for iPad Pro 9.7inch or iPad Mini or Tablet of Similar Size Samsung Galaxy

  • Adjustable ball head mount for omnidirectional mounting angle for easy viewing..
  • Can be mounted to multiple locations with smooth surface, such as windshield of cars, general aviation airplanes..
  • Heavy duty suction cup mount that will never fall off if properly mounted..
  • X-clamp can be adjusted to mount any sizes of tablet between the size of iPad mini to a full size iPad..
  • The clamp is made of highest quality hardened metal. With included ball head, it can also be mounted onto a tripod..
Check Stock

SMALLRIG Articulating Magic Arm with Double Ballheads (1/4' Screw) Monitor Mount for Field Monitor, Lights, Audio Recorders - 2070

  • 【FOR FIELD MONITOR 】With 1/4’’ screws on both ends, this product is compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum and stainless steel arm has a payload capacity of up to 3.3 lb.
  • 【360 DEGREE ADJUSTABLE】This SMALLRIG monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared allen wrench is ready to lock it tighter..
  • Arm component is interchangeable, it allows you to connect the other options like NATO Clamp(SmallRig 1973), Hot Shoe(SmallRig 1562), Super Clamp(SmallRig 735), and 3/8-16 screw adapter(SmallRig 1069)..
  • The thumb wingnuts with anti-off structure technology prevents the ballheads fall apart when using, and the rubber cushions to prevent the monitor from scratches..
  • The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly with single hand..
Check Stock

NIXFACE 2 Heavy Duty Hitch Coupling Clamp - Anti Rattle Device Tightener Receiver

  • Trailer hitch clamp Materials:Heavy duty steel..
  • Package Include:1 set of 2" Heavy Duty Hitch Coupling Clamp(Screws included)..
  • Vehicle Fitment:Hitch Tightener fit for 2" receivers.Designed for use with almost all hitch mounted bike racks and cargo carriers..
  • Hitch Clamp was designed to eliminates the hitch wobble at the junction of your bike rack / utility carrier / trailer hitch and your hitch receiver..
  • Easy to Install:Simple design,simple to use..
Check Stock

Neewer Upgraded Super Clamp with Mini Ball Head Mount with 1/4' Screw and Cold Shoe Mount Adapter for LCD Field Monitor, Flash, Microphone, LED Light, Light Stand, Load up to 3.3lb/1.5kg — ST11

  • 【Metal Super Clamp】: Made of high-strength aluminum alloy and stainless steel, it is solid with great durability. The maximum opening is 52mm and the minimum is 15mm, it can be mounted to anything like cameras, lights, umbrella, hook, bicycle, shelves, table, crossbars and more.
  • 【1/4" Screw】: Standard 1/4" Screw on the top of the ball head is compatible with LED light, camera, Microphone, Monitor, and other accessories, and support 360-degree rotation to meet various shooting demands.
  • 【Cold Shoe Mount】: The included cold shoe mount is suitable for attaching to cameras, such as Canon, Nikon, Sony, Olympus, Pentax, Panasonic, Fujifilm Cameras, and more.
  • 【Wide Compatibility】: The super clamp with 1/4"-20 and 3/8"-16 thread can be mounted virtually anywhere. Included anti-slip rubber cushion of the clamp helps prevent the scratches of your devices and help to lock the device tighter.
  • 【Lightweight & Portable】: Weights only 0.29lb/130g, The optimum load of this super clamp mount is 1.5kg (3.3lb), perfect for both indoor and outdoor events..
Check Stock

Complete Jewelry Soldering Pickling Kit with Pickle Pot Compound and Copper Tongs

  • 【Novel Design】: Bench pin clamp set is ideal for bench work, craft ideas, jewelry, and tools workshop. It is perfect for Drilling, Sawing, Filing and Finishing a variety of materials..
  • 【Durable 】: This Bench Pin is made of quality hardwood and comes with a steel clamp. The clamp has a capacity of 1.57"(40mm approx). Dimensions: 2-3/11" x 7-1/2" x 1/2"(58mm x 190mm x 13mm approx)..
  • 【Versatile】: Perfect for holding metal, wood or plastic for easy sawing..
  • 【Convenient】: V-Slot Bench Pin with Clamp, a portable bench pin that can quickly and easily be mounted on almost any Workbench, Desk or Table..
  • 【Perfect for Detail】: It is indispensable for for both the professional and hobbyist..
Check Stock