Reviews Carbon Steel Welding Electrode

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock

Hypertherm 420240 Electrode, XPR 80 Amps Mild Steel

  • 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose.
  • General purpose maintenance and repair electrode for welding low carbon steels in any position.
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

  • Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
  • Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
  • Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
  • Easy to operate for beginner , can read the output welding current with smart digital display..
  • Comes with a easy carrying handle easy for carry, can be used anywhere you need..
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...e better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contact tip of this welding torch is 0.8mm. If you use 1.0mm welding wire, you need to change the contact tip. (If you have any questions in use, please feel free to contact us. We will reply you within 24 hours.).
Check Stock

63PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit for WP-17/18/26

  • The 63pcs Tig Torch accessories (consumables).
  • Use for:WP-17 WP-18 WP-26 TIG Welding Torch, for many locations of the pipeline TIG welding arc welding and arc welding, can be welded carbon steel and some low alloy steel..
  • Electric conductivity similar with: 2% thoriated tungsten electrode at either AC or DC.No need changing any welding program..
  • Applicable machine: Mitech, Longetivity,Rilon, Krypton, Riland, Jasic, Chiry, UNT, Berlan etc.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher..
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Welding Machine,TEWLEN ARC MMA 225Amp Welder IGBT Digital Electric Welding Machine Kit, Portable 110V Inverter Welder with Electrode Holder,Ground Clip, Mask, Brush, Welding Rods and Gloves

  • ...g welding, easy operation for beginners and professional..
  • 【Portable & Widely Used】Welder machine with compact size and handle design, easy to carry and storage. Multi use for outdoor maintenance and repair, metal processing and DIY..
  • 【Complete Accessories】225A ARC Welding Machine Kit includes 1 x Welder.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

RX WELD 55PCS TIG Welding Torch Stubby Gas Lens #10 Pyrex Glass Cup Kit For WP-17/18/26

  • 55pieces TIG Torch Accessories (consumables).
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

RX WELD 57PCS TIG Welding Torch Stubby Gas Lens #12 Pyrex Glass Cup Kit For WP-17/18/26 (Large)

  • 57pieces TIG Torch Accessories (consumables) with #12 Pyrex Cups.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • Region free and easy to use, can be used for WP-17 WP-18 WP-26 TIG Welding Torch..
  • Its electric conductivity is most closed to 2% thoriated tungsten electrode at either AC or DC, and no need any welding program changes..
  • Applicable to Machine such as Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on..
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

HONE Stick Welder 110V/220V Actual 140Amp ARC Welder Machine IGBT Inverter Digital Display LCD Welding Machines with Hot Start Arc Force Anti-Stick High Efficiency for 1/16 -1/8 Welding Rod.

  • ...t, the pretty nice beads, specially when in small welding current..
  • ➠【Suitable for Series Welding Rod】The welder has amazing hot-start, is ideal for the rods AWS E6013 E7018 E6011 of 1/16"-1/8"(1.6mm-3.2mm), you just take the rod touching the workpiece, arc striking immediately, also can handle E6010 cellulose electrode, capable of welding mild steel, carbon steel, stainless steel and cast iron..
  • ➠【Safe and Stable】This welding machine has Anti-stick function easy the electrode removal from the workpiece, and closed-loop feedback control and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation..
  • ➠【Easy to Operate】The soldadora inverter 110V 220V equiped with digital display and trouble indicate, the real welding current be shown, is so easy to use that it can be used by novice or master welder. No matter is man or woman welders..
  • ➠【Portable and Support】HONE welder with a easy carrying handle, compact design, light weight, easy for carrying and storage, very convenient, can be used anywhere you need. If you meet any problem while using, please feel freely to contact us at the first time. Our customer service will help....
Check Stock