Reviews Ergonomic Welding Electrode Holder

STINGER Stv002 Electrode Holder Insulated

  • V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
  • Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
  • Eliminates Arc Burns From Rod "Popping" Out.
  • Molded Thermoset insulating cover set meeting the requirements of your welding projects.
  • Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A)

  • ★Electrode Holder can be used for 300A..
  • ★Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions..
  • ★MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • ★Constructed for long life and dependability.
  • ★Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs..
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

  • Welding rod holder Accepts rods up to 5/16''.
  • Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
  • Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
  • Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
  • high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

  • Great for most Arc, MMA, Hand Stick welding jobs.
  • Arc welding electrode holders with a comfortable insulated handle and easy to operate..
  • Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
  • High quality electrode holder is with highly conductivity and improved cable connections..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

  • 1.300Amps Welding Electrode Holder American Style.
  • 2.With 35-50 quick plug. Easy connected..
  • 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
  • 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock