Reviews Carbon Steel Blade

Ontario 8155 Mark III Trench Knife (Brown)

  • 11.75"over all length,6.75"blade,.1875"thickness.
  • Natural leather sheath with brass rivets.
Check Stock

Samurai Katana Full Handmade Japanese Sword,Dragon Tsuba,1060 1095 Carbon Steel Heat Tempered Sharp Functional Fully Tang

  • This katana is a handmade 1095 high-carbon steel sword for 100%. The knife blade is thoroughly tempered and fabricated by making, hot forging,....
  • the blade is hand polished with multiple grades of sharpening stones which .Traditional 14 Stage Hand Polished Finish.blade is very sharp BLADE....
  • The blade is High carbon steel Folded Steel . and has grooves ，The blade is forged and polished repeatedly with traditional unique techniques. The....
  • Blade Material:1095 High Carbon Steel Blade Full Handmade,weight:1.20kg/2.6pound,It is 103 cm/40.55 inches in length, 26 cm/10.24 inches in handle....
  • The unique and exquisite wave hamon of the blade looks like mountains and water. This katana is decorated by gorgeous blue, thus it looks....
Check Stock

Cold Steel 1830 Napoleon Saber

  • Our 1830 Napoleon Saber takes inspiration from these exceptional swords, with an elegantly curved 1055 Carbon Steel blade and long, wide fuller, culminating in a very sharp, but practical point..
  • Steel: 1055 Carbon - The carbon content and lean alloy of this shallow hardening steel make this a very sturdy material that avoids a lot of the brittleness commonly associated with higher carbon materials..
Check Stock

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

BPS Knives Blank 06 - Blank Blade for Knife Making - 5 Carbon Steel Rat Tail Blade - Scandinavian Scandi Grind Knife Blank - DIY Knives Making Blades

  • Carbon Steel Knive Blade Blank for making knifes. Blade Blanks Hidden Tang(Rat-tail).
  • Knife Making Kit: Partial Blade Knife and Bolster. DIY knife set. Durable and robust carbon steel knife blank.
  • True Scandi Grind 1066 High Carbon Steel. Scandinavian Sharpening Blade Blank Hardness 58-59 HRC.
  • Custom Knife Kit for Making Outdoor Camping Survival Bush Knife no Handle.
  • Blade length - 5.1"(130 mm), Blade thickness - 0.1"(2.7 mm), Overall length - 8.5"(215mm).
Check Stock

STEELPORT Carbon Steel Chef Knife Care Kit | Camellia Blade Oil & Handle Wax | Protect and Maintain the Luster of Carbon Steel Blades and Wood Handles | Food Safe for Culinary Kitchen Knives

  • PROTECT & PRESERVE CARBON STEEL – Handcrafted carbon steel cutlery is for those who take pride in keeping their tools at peak performance through basic maintenance. Keep your carbon steel knife dry. Day-to-day care is as simple as hand-washing and drying your knife immediately after use..
  • MAINTAIN THE LUSTER OF YOUR BLADE – Use blade oil and handle wax regularly to protect and maintain the luster of your carbon steel blade and wood handle for years to come. A well cared for carbon steel knife will become a treasured family heirloom..
  • 100% NATURAL GRADE A BLADE OIL – STEELPORT blade oil is food-safe, Pure Cold Pressed Camellia Seed Oil sourced from Japan. Odorless and flavorless with a long shelf life makes it ideal for short or long-term storage of kitchen knives..
  • KEEP YOUR HANDLE LOOKING BRAND NEW – STEELPORT Handle Wax is a food-safe mixture of 100% natural Beeswax and oils, made in Oregon to maintain or restore luster of your handle..
  • 100% AMERICAN MADE AND PREMIUM QUALITY – STEELPORT Knife Co. is reintroducing heirloom American forged carbon steel cutlery. All STEELPORT products are proudly made in USA and completed in our Portland, OR factory. We deliver trusted performance, exceptional design and handcrafted individuality through rigorou....
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

High Carbon 1095 Steel Traditional Tanto Knife Blank Blade Skinner Hunting 1095HC New

  • 1095 High Carbon Steel Drop Point Knife Blank Blade Hunting Skinning Skinner 1095HC.
  • Dimensions: 8.875 inches Approximate Overall Length, 4.125 inches Approximate Blade Length, 4.75 inches Approximate Handle Length, 1.2 inches Widest Part of Blade, 1.15 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch).
  • High quality 1095HC (high carbon) steel construction..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
  • High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention..
Check Stock

TRUEKATANA Black Katana, Handmade Japanese Katana Sword T10 Folded Clay Tempered Steel with Black Scabbard

  • Katana, t10 carbon steel, handmade, full tang, clay tempered, real hamon, hand forged, battle ready, blade polished, sharpened, 40.5 inches, gold-plated tsuba, black cord handle, piano paint scabbard.
  • Folded t10 high carbon steel blade, hamon and hardness created with temper process..
  • Clay tempering imparts strength, flexibility, real hamon, not wire brushed or printed..
  • Expertly hand forged by seasoned sword-smiths using advanced techniques honed over centuries.
  • Overall length: 40.5 inches, nagasa length: 28.3 inches, handle length: 10.2 inches, blade sharp: sharpened, blade material: t10 carbon steel, blade width: 1.18 inches, saya material: wood, weight: 2.65 lbs.
Check Stock

Red Devil 4218 Flexible Taping Knife, 6\

  • High-carbon lacquer coated rust-resistant steel blade.
  • Designed for maximum safety and dependability.
  • Full Tang: Blade extends through the handle.
Check Stock

AULAKNIV Collect Customized Full Tang Fixed Blade D2 Steel Perfect Tactical Design 12.5" Bowie Knives Tactical,Hunting,Survival,Camping Tools W/Leather Sheath

  • Overall 11 inches Long hand forged full tang twist pattern Damascus steel blank blade.
  • 6 inches long cutting edge. Up to standard of Kukri point blade skinning Knife.
  • 4.75" long finger serrated Scale space with finger guard.
  • Approximately 5 mm Thick twist pattern Damascus steel Kukri point blade. Our Damascus steel is prepared by forging over 200 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Stanley 16-978 1-Inch Blade Wood Chisel

  • Hardened, tempered, high-chrome carbon alloy steel blade for edge retention.
  • Includes blade guard to protect work edges.
  • Precision-ground cutting edge for optimal sharpness.
Check Stock

Misono Swedish Steel Dragon Sculpture Pieces Sujibiki No.122m / 27cm

  • HIGHEST GRADE CARBON STEEL ✅: Misono uses Swedish carbon steel, considered to be one of the purest form of carbon steel..
  • HAND FORGED ✅: Misono has professionals in Sakai city hammer the carbon steel sheets to strengthened the steel exactly like traditional Japanese....
  • RAZOR SHARP BUT ONE MUST TAKE CARE OF THEIR KNIVES ✅: Carbon knives are non stain resistant.
  • PRECISION ✅: The Sujihiki is a slicing knife intended for slicing boneless fish filets and proteins. The short height of the blade creates less....
  • EXCEPTIONAL SHARPNESS ✅: 70:30 Asymmetrical bevel. By concentrating the sharpening on the face of the blade at a steeper angle than on the back, a....
Check Stock