Reviews Carbon Steel Electrode

Apera Instruments, LLC-AI1312 Apera Instruments 201T-S pH/Temp. Electrode, 8-pin Connector, The Replacement Electrode for Apera 400/400S Series Portable Meters

  • 1.Glassy carbon, or glassy carbon, is a kind of amorphous carbon, which is made by slowly heating polyacrylonitrile resin or phenolic resin to a high temperature (up to 1800 ℃) in an inert atmosphere. It is suitable to be used as an electronic conductor material for electrodes and is also widely used in table tennis.
  • 2.The advantages of glassy carbon electrode are good conductivity, high chemical stability, low coefficient of thermal expansion, hard texture, good air tightness, wide application range of potential (from - 1 to 1V, relative to saturated calomel electrode). It can be made into cylindrical, disc and other electrode shapes. It can also be used as the matrix to make mercury film glassy carbon electrode and chemically modified electrode.
  • 3.Glassy carbon electrode is one of the widely used working electrodes. It is a good inert electrode with good conductivity, high hardness, high finish, high hydrogen overpotential, wide polarization range and chemical stability. It can be used as inert electrode for anodic stripping, voltammetric determination of cathode and variable valence ions, and can also be used as chemically modified electrode.
  • 4.The glassy carbon surface must be mirror and clean. Since the surface of glassy carbon is easily polluted....
Check Stock

Hypertherm 420240 Electrode, XPR 80 Amps Mild Steel

  • 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose.
  • General purpose maintenance and repair electrode for welding low carbon steels in any position.
Check Stock

iStim Super Soft 2'x2' TENS Unit Electrodes for TENS Massage EMS - 100% Japanese Gel (2'x4' - 16 Pieces)

  • iStim ELECTRODE PAD: Use high-grade, and biocompatible SEKISUI Japanese gel, which facilitates efficient conducting of the electrical stimulator’s current to the patient’s skin in a dispersed manner. With spunlace non-woven cloth, it enhances the softness of the electrode and makes it be highly stretchable and flexible. Thus, iStim Electrode pads can be stuck to any parts of the skin tightly. Carbon Film and Carbon Fiber Wire provide great conductive surface to stabilize electrical conduction.
  • JAPANESE GEL: Japanese Sekisui Gel pads can be used up to 15 times if properly used. 100% SEKISUI Gel is the harmless ingredients and the best fit for even sensitive skin users. Highly Recommend: Use iStim premium quality electrodes with iStim TENS/EMS unit, making your every pain relief treatment more effective with perfect experience. [NOTE: DO NOT USE Extra Electrode Gel].
  • UNIVERSAL COMPATIBILITY: iStim electrode pads use standard 2mm pigtail connectors which is wide compatible with most mainstream TENS units, EMS massagers and muscle stimulators. iStim adhesive electrode pads are the best replacement accessories for your TENS/EMS device..
  • APPROVAL: OTC approved, no prescription needed. Pass SGS biocompatibility test, RoHS and LATEX-FREE test. Made in Taiwa....
Check Stock

LYINIE TENS Unit Pads 3\ Round Electrodes - Compatible with Most TENS Machines, Replacement Pads Electrode Patches for Electrotherapy, 20 Count

  • Neurostimulation electrodes made out of Svelte 2 mm carbon film (as opposed to typical 4-5 mm thick) proprietary lead wire technology provide a superior quality electrode at an economical price.
  • Known for their durability and multiple applications to the skin.
  • Every lead wire interface is customized for each electrode.
  • Achieves optimal current and maximizes conformity.
  • Each exclusive lead wire contains over 1,000 strands of stainless steel as the current carrier.
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

  • Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
  • Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
  • Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
  • Easy to operate for beginner , can read the output welding current with smart digital display..
  • Comes with a easy carrying handle easy for carry, can be used anywhere you need..
Check Stock

ACDelco GM Original Equipment 41-110 Iridium Spark Plug

  • Iridium offers better engine idle stability and smoother performance.
  • Iridium allows for smaller, more efficient electrode designs for improved cold starting and quicker acceleration.
  • Iridium fine-wire electrode helps improve ignition of the fuel and burns away carbon deposits on the tip of the plug as they form, to help improve fuel economy.
  • One piece suppressor seal blocks radio frequencies that can affect vehicle electronics.
  • Suppressor seal meters spark energy for longer electrode life and seals against combustion leakage.
Check Stock

ACDelco 41-993 Professional Iridium Spark Plug (Pack of 4)

  • Iridium offers better engine idle stability and smoother performance.
  • Iridium allows for smaller, more efficient electrode designs for improved cold starting and quicker acceleration.
  • Iridium fine-wire electrode helps improve ignition of the fuel and burns away carbon deposits on the tip of the plug as they form, to help improve fuel economy.
  • One piece suppressor seal blocks radio frequencies that can affect vehicle electronics.
  • Suppressor seal meters spark energy for longer electrode life and seals against combustion leakage. Before installing new spark plugs, use a gap guide to make sure your new spark plugs have the correct gap.
Check Stock

10 Pieces Large Electrode Pads for TENS Unit Replacement Pads for TENS Machine

  • UNIVERSAL COMPATIBILITY: the Electrode Pads Fit Most TENS/EMS in the Market with 2mm Pigtail/PIN type Connector.
  • PREMIUM QUALITY TENS Electrodes: Improved Carbon Film, Good Conductivity, Low Impedance and Uniform Current Distribution.
  • Self-adhesive Electrode Pads: Good Sticky, Quick Grab, Easy to Peel and Dry-out Resisting.
  • Medical Grade Pads for TENS Machine, Bio-compatible, Non-irritating, Superior Environmental Adaptability of Hydro-gel.
  • Reusable Electrode Pads with Individually Bagged for Convenience of Storage and Use..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

ACDelco 41-103 Professional Iridium Spark Plug (6 Pack)

  • Iridium offers excellent engine idle stability and smooth performance.
  • Iridium allows for small, efficient electrode designs for reliable cold starting and quick acceleration.
  • Iridium fine-wire electrode helps burn away carbon deposits on the tip of the plug as they form.
  • One piece suppressor seal helps block radio frequencies that can affect vehicle electronics.
  • Suppressor seal meters spark energy for long electrode life and helps prevent combustion leakage.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
  • GM regularly updates production and service part designs to integrate new materials and technologies.
Check Stock

Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 60volts (10 pieces)

  • Q179A is a gas pilot assembly (with a flame electrode rod) and ignition electrode, making it suitable for applications requiring an interrupted or intermittent electrically ignited gas pilot burner.
  • Primary aerated type burner is equipped with stainless steel fins that provide the proper flame rod area to ground area ratio for maximum flame signal and flame stabilization.
  • Stainless steel electrode(s) are mounted in ceramic insulators, which permit electrode adjustment.
  • Rajah connectors facilitate disconnecting (A1126 has terminal screws).
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock