Reviews Carbon Fiber Car Parts

Carbon Fiber License Plate Frame - Aluminum License Plate Frames Handmade Covering 100% Real Carbon Fiber | Stainless Steel Tamper Proof License Plate Screws ,CF Cover | 4 Hole Slim Frame 1 Pack

  • ✅【Customize Carbon Plate Frame】: Genuine Carbon Fiber License Plate Frame-100% by the hand customize, Made of black Aluminum License Plate Frames covered with real carbon fiber cloth, Super Quality, very nice twill weave pattern! Stronger than the true 100% carbon fiber license plate frame,Improves the look of your car and matches other high quality carbon fiber parts you may have on your car!.
  • ✅【Very Cool License Plate Decoration Effect】：High Gloss Clear Finish with protective coating. The Smooth shiny surface really pops! Frame suitable for BMW license plate, Mercedes Benz, AMG, 4RUNNER, AUDI, LEXUS, Front license plate frame or rear frames installation.
  • ✅【Fits Usa And Canada License Plate 】:License Plate Frame Carbon Fiber Standard Sizs 6.25" x 12.25"，It will not block any letters, Numbers or stickers of the license plates.Grinded and polished by hand through 16 procedures，Will be REAL 100% carbon fiber cloth the package is made on an aluminum license plate frame. than the true 100% carbon fiber license plate frame, No cracking deformation.PLEASE NOTE: This carbon fiber license frame is NOT 100% REAL CARBON FIBER FRAME.
  • ✅【Anti-Theft Plate Frame】: Tamper-proof license plate screws kit, to prevent the theft of your license....
Check Stock

Valve Cover Engine Valve Carbon Fiber Style Spark Plug Cover, Valve Cover Gasket is Compatible with Honda VTEC B18 B16 B Series（Black）

  • 【Perfectly Matched Engine Valve Cover】 The valve cover is installed on the car engine, which can protect your car engine and keep it clean (features: seal the engine so that the lubricating oil does not leak).
  • 【Valve Cover Gasket Set Compatible Models】 Compatible with 1992-2001 Acura Integra (GS-R), compatible with 1997-2001 Acura Integra (R type), compatible with 1999-2000 Honda Civic sports car (Si), compatible with 1994-1997 Honda Del Sol (VTEC) Etc..
  • 【High-Quality Valve Cover Gasket】 It is made of durable plastic carbon fiber, has a striking twill weave, and adds a unique engine valve spark plug cover, which is light in weight, high in strength, stylish & durable..
  • 【Valve Covers Light Weight】Lightweight carbon fiber, release the old wildness of your car, is definitely an ideal substitute for old parts, and improve dynamic performance. For power enthusiasts, carbon fiber hood should be their real choice..
  • 【Low Price & Low Noise & Easy Installation】 The engine cover is affordable, and the plastic carbon fiber style is cheaper than metal, and it can insulate noise better than metal. Easy to install, no need to drill and cut. (The weight is only 0.2kg).
Check Stock

Silence Shopping 3D Black Carbon Fiber Vinyl Wraps Car DIY Wrap Vinyl Roll Film Self-Adhesive Twill Weave Sheet Sticker 127X30cm/50 X11.8 (Black)

  • ❖ GOOD QUALITY: The black 3D carbon fiber vinyl wrap is made with automotive high polymer PVC that is used for wraps and conforms well to medium curve contours and shapes.
  • when applied correctly to the appropriate hard surface the film is very durable.
  • the car wrap sticker roll protects your paint from scratches and wear.
  • ❖ EASY INSTALLATION: Can be easily re-positioned and stretched for exact fitment and is soft enough to conform to all edges/contours/shapes.
  • any creases/folds air bubbles can be removed by applying hairdryer or heat gun and using a squeegee.
  • ❖ SUITABLE SIZE: The size of the carbon fiber car wrap vinyl roll is 1.27m x 30cm.
  • the carbon fiber vinyl film is water resistant and not easy to change color, this car wrap sticker roll can be quickly removed without leaving glue marks.
  • suggest use a hair dryer to heat it up to make it stick tighter and firmer.
  • ❖ ECONOMICAL ALTERNATIVE TO PAINT: It is a perfect solution for refreshing your car / home appliance / gadget.
  • it saves you both the time and hassle of any painting job.
  • our wrap vinyl is a must have for cars and bikes.
  • ❖ WIDE APPLICATION: Our car wrap sticker roll can be applied to cars hoods, boots, roofs, dashboards, gauges, interior, amplifiers, wheels, mirrors, door handles, g....
Check Stock

Carbon Firber Sheet 200x300x1mm 100% 3K Twill Weave Carbon Fiber Plate Panel Matte Surface Carbon Firber Sheets

  • Strong Strength and Light Weight:100% pure carbon fiber with no other fillers/composite layers,high strength,light weight and good flexibility,the plate panel can be used to construct strong structures, create supports,or for fabricating your own parts..
  • Twill Weave:The surface is 3K twill weave and finished with a matt surface on both sides,it without any glass fiber contents and perfect for adhesive bonding..
  • Applications:Carbon fiber plate is widely used in RC airplanes,drones,helicopters,car chassis,sports equipment,decorating parts,or can use as a photography backdrop etc..
  • Wide range of thicknesses and sheet sizes:High quality carbon fiber sheets come in various sizes,1~4.0mm,200x300/300x400/400x500mm available,it can meet your different needs..
  • Cutting,Shaping & Finishing:We recommend that you purchase professional cutting tools for cutting at local hardware store to ensures stable and precise dimensions.Please feel free to contact us with questions about carbon firber sheet..
Check Stock

Limsas Carbon Fiber License Plate Frames Black, 2 Pack Car Plate Frame with Carbon Coasters Front and Rear Slim Thin License Plate Frame Aluminum Metal Rust-Proof Universal Car Tag Holder

  • You Will Get - The product comes with specially customized carbon fiber pattern coasters and carbon screw caps. And package contains installation tools, you don’t need to purchase them separately, they are durable and not easy to rust. Including 2 carbon fiber license plate frames, 4 cup washers, 4 screw caps, 4 screws, 1 screwdriver and 2 coasters. The supporting carbon fiber license plate frame highlight your life style, and reflects the elegance and premium of your car from the details..
  • Carbon Fiber Surface - Classic and elegant license plate frames made of stainless steel, surface printed glossy carbon fiber pattern. After professional polishing technology, the surface is smooth and has no sharp edges, no need to worry about scratching your license plate and hands. ​The carbon car plate frame ensures greater strength and durability, prevents the license plate from rusting or being damaged. A classic look makes your car more elegant and stylish..
  • 2 Holes & 0.6 Inch Ultra Slim Edges Design - The thin license plate frame is designed with 2 precise holes and professionally ground, will not scratch your loved car. The ultra-thin border license plate frame is specially designed, and will not cover the state name and registration label or other impor....
Check Stock

Eramco 06384 REPL DUOTHERM Filter 1PK

  • ...produced by a professional auto parts factory, made of high-quality ABS plastic, lightweight and durable, not easy to wear and fade, impact and corrosion resistance, with qualified quality and service life Longer..
  • 【EXQUISITE CRAFTSMANSHIP】This rear vent protective cover adopts excellent processing technology in carbon fiber style and has a glossy appearance as a whole, which can add a luxurious and elegant feeling to your car. It also has a meticulous workmanship and smooth surface to enhance customer use Feel..
  • 【EXCELLENT PERFORMANCE】This rear vent protection cover is practical and can prevent dust on the surface of the air conditioning vent frame. It is always clean and novel. The strong material can withstand friction and collision in daily use..
  • 【UNIQUE DESIGN】This rear vent protective cover is decorated with classic carbon fiber patterns. It is classic and atmospheric. The overall structure strictly refers to the original car design, clean and generous, and perfectly fits the original car..
  • 【EASY TO INSTALL】This rear vent protective cover is equipped with a unique selfadhesive design on the back, which can be installed directly by tearing off the red protective film, which greatly saves your installation time. It will not harm your ....
Check Stock

Auto Accessories 5D Glossy Carbon Fiber Wrap Vinyl Film Car Interior Wrap Stickers, Car DIY Interior Exterior (12*60inch) (US Stock)

  • DIY: Black carbon fiber car vinyl wrap is specially engineered for DIY'ers. This Carbon Fiber film is ideal for long-trip fleet and motor-sport marketing applications, for a hyper-realistic carbon fiber look!.
  • Application for: Interior or Exterior of Automobile parts such as: Dashboard, Steering wheel, interior door handles, Glove compartments, car control panel, Fenders, Door handles, tire rims, exhaust pipes, ect..
  • Eco-friendly "paint": This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint!.
  • If you notice the sticker is curled and wrinkled, please be careful , the sticker can be recovery as the below step:1. Clean paste position.
  • 2. Move away the bottom paper on the back.
  • 4. Use a hair dryer to heat the wrinkled and curled place of the car sticker, then use the scraper to flatten the sticker and remove air bubbles. 5. Move away the transfer film carefully.
  • 6. Finish. Don't wash your car in 3 days..
  • Any questions please feel free to contact us, we will help you solve it..
Check Stock

JC SPORTLINE Carbon Fiber Rear Diffuser fits for BMW F06 F12 F13 M6 2-Door 4-Door 2013-2019 Bumper Cover Lower Lip Spoiler Valance Protector Body Kits Factory Outlet

  • Fitment:This Rear diffuser Fits for BMW 6 Series F06 Gran Coupe/F12 Convertible/F13 Coupe M6 2-Door 4-Door 2013 2014 2015 2016 2017 2018 2019, not for F06/F12/F13 Base & M Sport Models..
  • Material:JC SPORTLINE Carbon Fiber aerodynamics parts are using extremely strong, air craft high-grade carbon fiber material which are lighter in weight and high tensile strength ,this ensures long lasting service life you expect.Ultra high-gloss clear gel-coated finish & UV protected, this ensures long lasting service life you expect..
  • Ultra Lightweight:Our carbon fiber parts are lightweight in comparison with other materials, giving you a weight reduction gain on your build..
  • Installation:The rear lip is installed with tape and tapping screw.Highly recommend professional installation.(This rear diffuser is a part of the kit, you can take the whole kit in our store, get the better appearance and save more.).
  • This Rear Lower Lip Valance can enhance the car's sporty performance ,makes the car more dynamic..
Check Stock

High Performance Parts Front Bumper Lip Splitter – Carbon Fiber Lower Body Side Skirt Spoiler with Accessories Kit for 07-12 BMW 3 Series E90 / E92 / E93 / M3 & 08-12 M3

  • [PERFORMANCE] – High Performance Parts splitters will add a sporty and aggressive look to your car while enhancing aerodynamics by lowering overall drag. These carbon fiber parts allow full customization to the total downforce on the car dramatically improving vehicle stability in addition to grip and traction..
  • [DURABILITY] – Each High Performance Parts splitters are made from real high quality lightweight carbon fiber material with vacuum infused technology to ensure that they last and endure. UV proof clear coat to prevent any color fading..
  • [QUICK INSTALL] – Easy to assemble with all parts included. No additional parts needed. We recommend that this item to be installed by a reputable mechanic to customize and tailor to your vehicle’s specific efficiencies and dynamics..
  • [FITMENT] – A fitment guide has been provided above to ensure that this product will fit your vehicle..
  • [SATISFACTION] – We have an experience team of service representative ready to assist you with any of your questions or concerns. Customer satisfaction is our number one priority..
Check Stock

JC SPORTLINE Carbon Fiber Front Bumper Splitter Fits for A7-Sline S7 2019 2020 Fog Light Cover Trim Scoop Winglet Apron Fin Front Splitter

  • Fitment:This front bumper vent is well fits for Audi A7-Sline S7 2019 2020..
  • Material:JC SPORTLINE Carbon Fiber aerodynamics parts are using extremely strong, air craft high-grade carbon fiber material which are lighter in weight and high tensile strength ,this ensures long lasting service life you expect.Ultra high-gloss clear gel-coated finish & UV protected, this ensures long lasting service life you expect..
  • Ultra Lightweight:Our carbon fiber parts are lightweight in comparison with other materials, giving you a weight reduction gain on your build..
  • Installation: Install by self adhesive tape, no modification needed..
  • This front fender scoop vent trim can make the vehicle look like a more performance car, it adds more down force and helps aerodynamic,dramatically improve styling & appearance..
Check Stock

Vertical Wings for Hawk’S Work RC Plane 822P (2 Pairs)

  • Prmium Material: Made of high quality aluminum alloy and carbon fiber material, tail wing is durable, wear resistant, high strength and more delicate in appearance..
  • Latest Rear Wing Design: A complete set of the latest rear wing design improves handling and makes the rear more stable at high speeds..
  • Reduce Drag and Great Durability: Powder coated for maximum durability. Reduce drag and enhanced downforce, traction and stability..
  • Improve Performance: Rear wing helps to improve the overall performance of the RC car, and the original parts can be directly replaced to obtain higher strength..
  • Applicable Model: RC car tail wing is suitable for 1/10 RC on road racing drift car universal, such as for HSP, for Kyosho, for Sakura, for LC, for Tamiya, etc..
Check Stock

Single Side Eyelid Tape Stickers, Medical-use Fiber Eyelid Lift Strip, Perfect for Hooded, Droopy, Uneven, or Mono-eyelids （336Pcs）

  • 【Brilliant Compatibility】Carbon Fiber Headlight Eyebrow Cover Specially fit for Infiniti Q50 2014‑2019, can gives your car a sporty look, brings a sense of luxury and glory..
  • 【Excellent Performance】Carbon Fiber Headlight Eyebrows Eye Lid Sticker Durable and sturdy, has superior anti‑backlash and wear‑resistant properties, rustproof and colorfast for better decorative effect..
  • 【Easy to Install】Carbon Fiber Eyelids Headlight Eyelid Trim Easy to maintain and clean, simple installation with the adhesive tape on the back, just peel and stick, no drilling or welding required..
  • 【Brilliant Compatibility】Carbon Fiber Headlight Eyebrow Cover Specially fit for Infiniti Q50 2014‑2019, can gives your car a sporty....
Check Stock

WODOFO GDR Soft Carbon Fiber Car Control Gear Box Shift Knob Panel Frame Cover Sticker Interior Trim Compatible with BMW E90 E92 E93 3 Series 2005-2012 323 325 328 330 335

  • Durable & Protection: Soft Carbon Fiber Gear frame sticker is durable and prevents your car from finger nails and keys scratches. Covering the existing scratches.This cover trim is sturdy, rustless and scratch-resistant, to ensure maximum strength and durability for long lasting usage..
  • Decoration:Special carbon fiber sticker decoration parts that keep your vehicle unique and classy, instant upgrade the appearance.Freshen up the interior of your car with this car sticker accessories..
  • Easy installation: There is Double-sided tape inside.Install Carefully: Let the two sided adhesive tape set for at least an hour before doing anything but press straight down on the control gear shift panel cover. Held each cover firmly against the surface for 23 seconds after initial placement before moving on to the next, to assure flush and permanent installation..
  • Good choice for Christmas gift and New Year present..
Check Stock