Reviews Carbide Tipped Drill Bit

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

  • Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
  • Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
  • Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
  • Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
  • IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..
Check Stock

Rannb Carbide Hole Saw 4.5-inch/115mm Cutting Dia Hole Cutter for Cutting Stainless Steel & Iron

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Diameter: 115mm /4.5".
  • ⭐【Ideal Design】Pilot Drill Bit is used to locate the position precisely and protect carbide teeth from impacting when the pilot drill bit....
  • ⭐【Package Content】1pcs x Hole Saw Drill Bit + 2 x Pilot Drill + 1 x Hex Wrench.
  • ⭐【Applicable Materials】Quick, precise, smooth cuts into up to 5mm~27mm thick material ,especially designed to cut alloy, iron, stainless steel....
Check Stock

MAX-CRAFT Masonry Drill Bit Set 1/4 in Golden Flute Drill Concrete Stone-10Pcs

  • ✔️MASONRY DRILL BIT DIMENSION: 1/4"(Diameter) x 3-23/32" (Overall length).
  • ✔️QUANTITY/PACK: 10 Pcs Masonry Drill Bit in a Package..
  • ✔️MATERIAL: Premium High Grade Carbide Tipped for Cutting Point for best fast penetrating and Hardened HCS and CRV Steel for Masonry Drill Bits....
  • ✔️CARBIDE TIP POINT: The 130 deg. cutting point to enable easy cutting and best self-centering without Walking off When Drill Through Bricks,....
  • ✔️CONCRETE DRILL FLUTE: 2 Flutes parabolic flute design to ensure the quick easy chips removal..
Check Stock

Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing 3/8 Dia x 1/8 Drill Dia x 1/4 Inch Quick Release Hex Shank

  • IDEAL FOR EVERY WOODWORKER – 82 Degree Countersink set with Adjustable Drill Bit Depth Stop and No-Thrust Ball Bearing..
  • SET INCLUDES – Drill bits set includes a countersink bit, a slow spiral, HSS M2 fully ground drilling bit, and a quick-release 1/4" hex shank..
  • EXCELLENT FOR CUTTING – Use the drill bits for wood-working of Natural Woods, Man-Made Boards, MDF, Chipboard, Plywood, Aluminum/Non-Ferrous, Aluminum Composite Material (ACM), Decking Materials, High Density Polyethylene (HDPE)..
  • CARBIDE TIPPED – Special carbide-tipped drill bits made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

Bosch 5/16 In. X 6 In. Round Hammer Drill Bit LBHX006

  • Carbide-tipped masonry bit with upgraded hex shank design – engineered to provide long bit life and fast material removal.
  • Asymmetric diamond-ground carbide tip – allows for fast drilling and longer bit life.
  • Upgraded hex shank – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Exclusive Bosch-made carbide – delivers outstanding durability under heavy loads.
  • Milled U-flutes with deep-cut spiral – delivers fast material removal.
Check Stock

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

Smart-Bit Pre-drilling and Countersinking Tool for Fiber Cement Board Including James Hardie Fiber Cement Board

  • Tungsten Carbide Tipped Countersink & Drill Bit.
  • The Smart-Bit stop collar spins free of the drill bit, preventing marring of the surface.
  • Each Smart-Bit comes with 2 replacement drill bits.
Check Stock

DEWALT Drill Bit SDS MAX Shank 16-Inch DW5912

  • Carbide-tipped, 2-piece design of the drill bit is made for easy diameter changes.
  • Replaceable center bit for maximum tool life of the drill bits for wood, metal and plastic.
  • Alternating tooth design of DEWALT drill bits delivers increased durability and quicker centering.
Check Stock

Bosch 7/32 in. X 6 in. Hex Shank Hammer Drill Masonry Bit LBHX020

  • Carbide-tipped masonry bit with upgraded hex shank design – engineered to provide long bit life and fast material removal.
  • Asymmetric diamond-ground carbide tip – allows for fast drilling and longer bit life.
  • Upgraded hex shank – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Exclusive Bosch-made carbide – delivers outstanding durability under heavy loads.
  • Milled U-flutes with deep-cut spiral – delivers fast material removal.
Check Stock

Bosch 7 pc. Hex Shank Hammer Drill Masonry Bit Set LBHXS7U

  • Carbide-tipped masonry bit with upgraded hex shank design – engineered to provide long bit life and fast material removal.
  • Asymmetric diamond-ground carbide tip – allows for fast drilling and longer bit life.
  • Upgraded hex shank – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Exclusive Bosch-made carbide – delivers outstanding durability under heavy loads.
  • Milled U-flutes with deep-cut spiral – delivers fast material removal.
Check Stock

Bosch 1/2 In. X 6 In. Hex Shank Hammer Drill Masonry Bit LBHX010

  • Carbide-tipped masonry bit with upgraded hex shank design – engineered to provide long bit life and fast material removal.
  • Asymmetric diamond-ground carbide tip – allows for fast drilling and longer bit life.
  • Upgraded hex shank – allows use in impact drivers and hammer drill/drivers for added versatility.
  • Exclusive Bosch-made carbide – delivers outstanding durability under heavy loads.
  • Milled U-flutes with deep-cut spiral – delivers fast material removal.
Check Stock