Reviews Carbide Reamer Bit

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
• The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• 3/4 " shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #3, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/4 " flute length, Partial Flute Length Carbide.
• 1" shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 2" flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 7/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 FORSTNER CARBIDE BIT

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Golden)

• Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
• Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
• This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
• Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
• Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
• The top of the tapered drill can be applied to trim the surface and s....

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Silver)

• Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
• Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
• This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
• Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
• Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
• The top of the tapered drill can be applied to trim the surface and s....

COOKDUO Juice & Strain - Lemon reamer w/seed catcher (orange)

• COOKDUO Juice & Strain - Lemon reamer with strainer/seed catcher (orange).
• Reamer and strainer - holds lemon firmly in place for easier use while getting every last bit of lemon juice.
• Strainer / Seed catcher keeps out the pips/seeds, easily & cleanly juice over dishes.
• Clear strainer cup keep hands clean from oils of the lemon and snaps onto the reamer for storage.
• Non slip handle for comfort and control, Dish washer safe, BPA free components.

DEWALT DW5229 5/16-Inch by 12-Inch Carbide Hammer Drill Bit

• ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
• Four flute design cleans debris out for fast, efficient drilling.
• Three flats on shank eliminate bit slipping in chuck.