Reviews Cable Railing System

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Black Finish Stainless Steel Wood Concrete Level Deck PS02 BH4S

  • Key feature - This square cable railing post (black finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be d....
Check Stock

Muzata Cable Railing Post Slope Post 36"x1"x2" with 30-Degree Post Bottom Stainless Steel Black Powder Coated Pre-drilled with 30 Degree Angle Holes Wood Concrete Deck PR11 BA4S

  • 30-degree Post Bottom- This rectangle cable railing post (black finish) is specially designed for 30 degree ramp. It’s ideal when the side of staircase is not flat but sloped. It is pre-drilled with 10 pairs of 30 degrees angled holes to work on 30 degrees slopes and save your labor. If you need extra foot cover, pls search muzata PA09.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find aluminum cable railing posts..
  • Code compliance - This structural rectangle cable railing post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. It is important to consult local building offices about the rules since there might be different requirements in some states.
  • BlackSlope system - BlackSlope cable railing system is pre-designed to help you get a fully customized cable railing project. This system ....
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Brushed Stainless Steel Wood Concrete Level Deck PS02 LH4S

  • Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be....
Check Stock