Reviews Bed Railing System

Bed Rails for Elderly Adults Folding Bed Assist Rail Bed Assist bar Bed Guards for Seniors Bed Assist Handle for King Queen Full Twin (Color : Aluminum B, Size : 13cm Brackets 120x42cm)

  • BED RAILS FOR ELDRELY ADULTS：Bed assist rail can prevent the elderly and adults from falling at night, and create a reliable, independent and safe sleeping environment while in sleeping.
  • FOLD DOWN BED RAILING：Bed rails for adults elderly ，if not in use, just press the red button and slide it down to fold it, even allowing you to ignore its existence.
  • BED RAILING FOR SENIORS：This fold down bed railing provides firm stability to enable safe and easy assisted transfers.the support pole is made from Metal,it is durable and reliable for long term use..
  • ASSIST BED RAILS：This fold down bed rail is suitable for seniors, pregnant, patients for recovering, disables. the safety bed hand can help them get out of bed, stand up, especial for elderly who move difficultly. the hand guard grab bar can give them support..
  • EASY TO ASSEMBLE：Equipped with complete equipment for guardrail assembly, including instruction, easy to assemble and remove..
Check Stock

Bed Rails for Elderly Adults Bed Assist Rail Handle Bed Railing for Seniors Folding Bed Assist bar for King Queen Full Twin (Color : C-Bed Rail 120x40CM, Size : 8cm L Bracket)

  • BED RAILS FOR ELDRELY ADULTS：Bed assist rail can prevent the elderly and adults from falling at night, and create a reliable, independent and safe sleeping environment while in sleeping.
  • FOLD DOWN BED RAILING：Bed rails for adults elderly ，if not in use, just press the red button and slide it down to fold it, even allowing you to ignore its existence.
  • BED RAILING FOR SENIORS：This fold down bed railing provides firm stability to enable safe and easy assisted transfers.the support pole is made from Metal,it is durable and reliable for long term use..
  • ASSIST BED RAILS：This fold down bed rail is suitable for seniors, pregnant, patients for recovering, disables. the safety bed hand can help them get out of bed, stand up, especial for elderly who move difficultly. the hand guard grab bar can give them support..
  • EASY TO ASSEMBLE：Equipped with complete equipment for guardrail assembly, including instruction, easy to assemble and remove..
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Walker Edison Della Classic Solid Wood Twin over Wood Loft Bunk Bed Twin Size White

  • [STURDY WOOD LOFT BED] Pine Wood Frame, 8 Plywood Slats for Strong Support (Weight Limit : 175 lbs), No Box Spring Needed, Perfect Mattress....
  • [TWIN LOFT BED WITH SLIDE] Loft Slide Bed for Boys and Girls, Knot-Free Hardwood Construction with Fine Finish Guarantee Ones Feet’ Comfort and No....
  • [ULTIMATE SPACE SAVER] 28.8 Inch Under-Bed Clearance, Usable Floor Space Created in Your Child’s Room.
  • [BUILT-IN LADDER FOR STABILITY ] Customers’ Safety First When It Comes with Kids’ /Toddlers’ Loft Bed, Loft Bed With Built In Ladder Reinforce....
  • [HIGH RAILING GUARD] 11.9 Inch High Railing, Keep Your Kids Safe.
  • Easy Assemble Twin Loft Bed with Clear Instruction.
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata Cable Railing Post Slope Post 36"x1"x2" with 30-Degree Post Bottom Stainless Steel Black Powder Coated Pre-drilled with 30 Degree Angle Holes Wood Concrete Deck PR11 BA4S

  • 30-degree Post Bottom- This rectangle cable railing post (black finish) is specially designed for 30 degree ramp. It’s ideal when the side of staircase is not flat but sloped. It is pre-drilled with 10 pairs of 30 degrees angled holes to work on 30 degrees slopes and save your labor. If you need extra foot cover, pls search muzata PA09.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find aluminum cable railing posts..
  • Code compliance - This structural rectangle cable railing post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. It is important to consult local building offices about the rules since there might be different requirements in some states.
  • BlackSlope system - BlackSlope cable railing system is pre-designed to help you get a fully customized cable railing project. This system ....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock