Reviews Butt Weld Gate Valve

5\ Weldable Barrel Hinges Heavy Duty Bullet Hinges Weld on Steel, Detachable Ball Bearing Gate Door Hinges for Metal Swing Door,Trailer Ramp Gate,3/4\ Dia Pin,600 lbs Load Capacity(2Pcs)

  • Size：4.8 x 1.3 inch / 123 x 34 mm (L x W), 0.75 inch (19 mm) diameter Pin. 600 lbs load capacity..
  • High Quality Materials：Heavy duty weld on barrel hinges are made of carbon steel Q235B, high strength, high load capacity and hardness for long service life..
  • Smooth & Mute：Bullet hinges weld on steel with ball bearing can be rotated 360 degrees, low friction, more smoother and quieter..
  • Application：Male to female weldable gate door hinges can widely for sliding door, metal door, swing gate, trailer ramp gates, garage door, windows or anywhere you need a hinge to weld on..
  • Easy to use：Hinge pins are welded to either the outer frame or the gate/door and then inserted into the welded hinge pin to create custom, heavy-duty hinges..
Check Stock

Valterra 7210 ABS Gate Valve, Black, 2\ FPT x Spig

  • [ 304 Stainless Steel Material ] Our gate valve is made of high quality 304 stainless steel material, this gate valve is sturdy and durable..
  • [ Straight Style ] The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • [ Easy to Use ] It's easy to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • [ Widely Used ] Suitable for water, oil, gas, steam, mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
  • [ What You Will Get ] Yosoo Gate Valve, Yosoo worry free guarantee and friendly customer service.
Check Stock

NORJIN 1-2.5 inches Gate Valve Lockout Device with Safety Padlock, Water Spigot Lock Oil Gas Valve Lock Natural Gas Valve, Red

  • ☑【Gate Valve Lockout Set】 1pcs red gate valve locks and 1pcs padlocks. Suitable for outdoor faucet or electrical locking applications to help prevent the valve from opening during maintenance and repair..
  • ☑【Compatible With】Gate valve locking device and padlock set is suitable for gate valve handles from 1" to 2-1/2" (25mm-64mm) in diameter, with stem diameter up to 3/4 inch..
  • ☑【High Quality Material】 The lockout device is made of polypropylene material, strong and durable, high temperature resistant, impact resistant, and meets OSHA's lockout standard and designed for safety standards..
  • ☑【Wide Application】 Valve locks are commonly used for hose bib, gas, propane and water valves, plus forklift gas valves. Easy to use, suitable for professional and industrial use (not recommended for home use)..
  • ☑【Excellent Service】 If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..
Check Stock

Outdoor Faucet Locking System - Insulated Garden Hose Bibb and casing Lock and Cover - Saves Water, Prevents Unauthorized use and Vandalism, and is Easy to Install

  • Gate valve lock, 5 inches to 6.6 inches, recycled plastics, outdoor and domestic outdoor faucets, holiday homes, rental properties, office buildings, parks, schools, restaurants, etc..
  • A hollow circular shell surrounds the gate valve handle and is used in conjunction with a padlock to help prevent the gate valve from opening during the opening process, maintenance and repair.
  • Can accommodate padlock shackles with a maximum outer diameter of 175mm / 6.89in.
  • One lock hole can require multiple authorizations to operate the locked gate valve.
  • Suitable for 2.36 "-6.89" diameter stems, stem / shell, recycled polycarbonate is non-conductive and impact resistant, red, high visibility.
Check Stock

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

  • What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
  • Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
  • Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
  • These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
  • Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
  • Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Eagle-2000-FSC Gate Opener with Free Receiver, 2 Remotes and EG360 Monitored Photo Eye Included

  • The Eagle-2000-FSC Slide Gate Operator is designed for commercial use. Its built for gates up to 45’ feet or 1000lbs. It is equipped with a heavy duty 20’ft of nickel-plated chain and a no-weld chain kit for easy installation.
  • Package includes – Eagle-2000-FSC Electric Slide Gate Operator, (2) 10ft nickel plated chains, 2 wireless remotes, 1 receiver, and 1 photo eye sensor. We also provide 5-year limited warranty for commercial, and 7-year limited warranty for residential operation.
  • Smart Technology – Equipped with our modern Diamond Control Board, the ultimate feature packed and installer friendly control board in the industry. Featuring an open and close delay, motor brake, anti-tailgating, partial open, stop-reverse and auto close timer.
  • Safe and Secure – The Eagle-2000-FSC allows you to open the gate with a use of the release crank during a power outage. This model cannot be manually pushed open nonetheless, it is equipped with lighting and surge protection.
  • Power and Hardware– With the service technician in mind, the Eagle-2000-FSC is easy to install. Equipped with a no-weld Chain Brackets and a Pre-wired Receiver Terminal. It is also powered by ½ Horse Power Motor & an AC 120 VAC @ 60 Hz 5.7 AMP. Additionally, with an all-weather UV R....
Check Stock

Heavy Duty Gate Hinges 5 Inches - 2 Pack Black Iron Door Hinge Barrel Style 450 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 5 inch, barrel diameter is 1 inch, back plate width is 1 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 450 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges.
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

Heavy Duty Gate Hinges 7 Inches - 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

  • Heavy Duty Design: Hinge length is 7 inch, barrel diameter is 1.25 inch, back plate width is 1.25 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity..
  • Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
  • Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
  • The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges..
  • 100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..
Check Stock

4 Sets Water Spigot Lock, Gate Valve Lockout Device with Safety Padlock,1-2.5" Diameter Valve Handles Faucet Locks Outdoor for Gas Water Spigot Petroleum

  • ...with 4 pieces of outdoor faucet locks, and 4 pieces of red combination locks.
  • They are designed in red color, highly visible and eye catching, preventing others from using water pipes without permission, and don't worry about the water being stolen.
  • Suitable Size: our gate valve lockout device is suitable for gate valve handle with a diameter of 1 to 2-1/2 inch (25 mm to 64 mm), and compatible with padlock shackles up to 0.39 inch outside diameter.
  • Please check the size information carefully before purchasing.
  • Security Design: the outdoor faucet handle lock features a hollow circular housing for surrounding the gate valve handle, combined with a combination lock, to help prevent the valve from opening during maintenance and repair.
  • Durable material: the gate valve lock is made of ABS, impact resistant and can withstand rough and harsh weather without breaking, temperature range from minus 46 degrees Celsius to 183 degrees Celsius (minus 115 degrees Fahrenheit to 361 degrees Fahrenheit).
  • The padlock combination red is made of zinc alloy, which is waterproof and rustproof, and you can set safe codes conveniently with the four....
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16

  • For Accurate Calibration of Butt Fillet Type Welds.
  • Determine the Leg Size of the Fillet Weld.
Check Stock