Reviews Butt welded Gate Valve

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Amerex B240 Stored Pressure Water Fire Extinguisher 2.5 gallon for Class A Fires

  • Exclusive crevice-free, butt-welded cylinders.
  • Temperature range from 40° F to 120° F.
Check Stock

Valterra 7210 ABS Gate Valve, Black, 2\ FPT x Spig

  • [ 304 Stainless Steel Material ] Our gate valve is made of high quality 304 stainless steel material, this gate valve is sturdy and durable..
  • [ Straight Style ] The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • [ Easy to Use ] It's easy to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • [ Widely Used ] Suitable for water, oil, gas, steam, mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
  • [ What You Will Get ] Yosoo Gate Valve, Yosoo worry free guarantee and friendly customer service.
Check Stock

Wall Mount Gate Hinge, Wood Fence Link Gate Hinge, Heavy Duty Outdoor Post Chain Hinge,Diameter 5/8\ Hinge Pin,304 Stainless Steel 2 Pack

  • Package:2 PACK chain link fence gate post hinge..
  • Size:‎5.0 x 1.5 x 1.7 inches(5/8" male pin).It can withstand 480 lbs.With this hinge installed, the door can rotate about 290°.(Female Frame Hinge not included).
  • Easy to install: use screws or bolts to fix the fence door hinge on the post or wall(Screws not included).The installation location can be easily located according to the actual situation, and the installation is easy. Using these brackets, it's a breeze to move gates..
  • Use place:Flat Back Wall Mount gate hinge great for garden gate, driveway gate,barn doors, sheds gate, fences gate, etc..
  • Material: Chain link fence gate hinge is made of high-strength 304 stainless steel, anti-rust, Sturdy and durable,Stronger and more durable than galvanized iron or 201 stainless steel.The argon arc welding process is used, both sides are welded, and the reinforcing ribs are added to make the wall-mounted door hinge support strong and durable, and can withstand heavy doors.Heavy duty chain link can be used indoors or outdoors,Will not rust even in the rain..
  • Handmade, hand welded and polished.The 5/8" male pin adopts the T-shape design, which can bear greater weight. The bottom of the T-shape pin is welded and polished, It is well-manufactured..
Check Stock

NORJIN 1-2.5 inches Gate Valve Lockout Device with Safety Padlock, Water Spigot Lock Oil Gas Valve Lock Natural Gas Valve, Red

  • ☑【Gate Valve Lockout Set】 1pcs red gate valve locks and 1pcs padlocks. Suitable for outdoor faucet or electrical locking applications to help prevent the valve from opening during maintenance and repair..
  • ☑【Compatible With】Gate valve locking device and padlock set is suitable for gate valve handles from 1" to 2-1/2" (25mm-64mm) in diameter, with stem diameter up to 3/4 inch..
  • ☑【High Quality Material】 The lockout device is made of polypropylene material, strong and durable, high temperature resistant, impact resistant, and meets OSHA's lockout standard and designed for safety standards..
  • ☑【Wide Application】 Valve locks are commonly used for hose bib, gas, propane and water valves, plus forklift gas valves. Easy to use, suitable for professional and industrial use (not recommended for home use)..
  • ☑【Excellent Service】 If you have any questions or concerns, please feel free to contact us. It is our policy to render the best service to our customers..
Check Stock

Outdoor Faucet Locking System - Insulated Garden Hose Bibb and casing Lock and Cover - Saves Water, Prevents Unauthorized use and Vandalism, and is Easy to Install

  • Gate valve lock, 5 inches to 6.6 inches, recycled plastics, outdoor and domestic outdoor faucets, holiday homes, rental properties, office buildings, parks, schools, restaurants, etc..
  • A hollow circular shell surrounds the gate valve handle and is used in conjunction with a padlock to help prevent the gate valve from opening during the opening process, maintenance and repair.
  • Can accommodate padlock shackles with a maximum outer diameter of 175mm / 6.89in.
  • One lock hole can require multiple authorizations to operate the locked gate valve.
  • Suitable for 2.36 "-6.89" diameter stems, stem / shell, recycled polycarbonate is non-conductive and impact resistant, red, high visibility.
Check Stock

Barrel Gate Hinge 7\ Heavy Duty Grease Zerk fitting Welding Plate (Lot 2 Pair)

  • Seven Inch Barrel Gate Hinges include: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The welding plates are steel and hinge pins are high quality copper. Holds up to 900 pounds..
  • Each hinge set measures 7" long and 1.5" wide. The height of the hinge is 1.625". Each welding plate measures 1.94" long and 1.25" wide. The thickness of the plates is 0.375"..
  • Easy to Mount - Easy to attach to gate or door and the mounting posts. Can be used with spacers. Clearly defined mounting plates make it easy to know how far along to weld. Pre-painted black..
  • Each pair of barrel gate hinges holds up to 900 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
  • Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

4 Sets Water Spigot Lock, Gate Valve Lockout Device with Safety Padlock,1-2.5" Diameter Valve Handles Faucet Locks Outdoor for Gas Water Spigot Petroleum

  • ...with 4 pieces of outdoor faucet locks, and 4 pieces of red combination locks.
  • They are designed in red color, highly visible and eye catching, preventing others from using water pipes without permission, and don't worry about the water being stolen.
  • Suitable Size: our gate valve lockout device is suitable for gate valve handle with a diameter of 1 to 2-1/2 inch (25 mm to 64 mm), and compatible with padlock shackles up to 0.39 inch outside diameter.
  • Please check the size information carefully before purchasing.
  • Security Design: the outdoor faucet handle lock features a hollow circular housing for surrounding the gate valve handle, combined with a combination lock, to help prevent the valve from opening during maintenance and repair.
  • Durable material: the gate valve lock is made of ABS, impact resistant and can withstand rough and harsh weather without breaking, temperature range from minus 46 degrees Celsius to 183 degrees Celsius (minus 115 degrees Fahrenheit to 361 degrees Fahrenheit).
  • The padlock combination red is made of zinc alloy, which is waterproof and rustproof, and you can set safe codes conveniently with the four....
Check Stock

Skelang 2-Set Gate Hinge 7”, Weld-on Hinge Barrel Style for Swing Gate and Trailer Ramp Gate, Total Load Capacity 4400 Lbs

  • MATERIAL: The barrel gate hinge is made of cold rolled steel and covered black electrostatic powder coating, rust and corrosion resistant.
  • SIZE: Total length is 7 inches, barrel diameter is 1-3/8 inches and pin diameter is 3/4 inches, mounting plate gap is 1-1/2 inches.
  • SMOOTH ROTATION: The gate hinge pair features grease fitting and an internal ball bearing, making for a smooth and squeak-free operation.
  • EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
Check Stock

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

5\ Weldable Barrel Hinges Heavy Duty Bullet Hinges Weld on Steel, Detachable Ball Bearing Gate Door Hinges for Metal Swing Door,Trailer Ramp Gate,3/4\ Dia Pin,600 lbs Load Capacity(2Pcs)

  • Size：4.8 x 1.3 inch / 123 x 34 mm (L x W), 0.75 inch (19 mm) diameter Pin. 600 lbs load capacity..
  • High Quality Materials：Heavy duty weld on barrel hinges are made of carbon steel Q235B, high strength, high load capacity and hardness for long service life..
  • Smooth & Mute：Bullet hinges weld on steel with ball bearing can be rotated 360 degrees, low friction, more smoother and quieter..
  • Application：Male to female weldable gate door hinges can widely for sliding door, metal door, swing gate, trailer ramp gates, garage door, windows or anywhere you need a hinge to weld on..
  • Easy to use：Hinge pins are welded to either the outer frame or the gate/door and then inserted into the welded hinge pin to create custom, heavy-duty hinges..
Check Stock