Reviews Bushing Installer Set

Ajax Tools Pneumatic Brake Pin & Bushing Driver Kit (AJX-A1166)

  • Includes One Mercedes Benz Bushing Remover/Installer.
  • Designed to Remove and Replace Metallic Bushings on Mercedes Rear Axles.
  • Services Almost All Mercedes Passenger Cars from 1984 and Up.
  • Features a Pressure Piece that Provides Correct Position of Replacement Bushing.
  • Includes a Cut-Out In Cap to Allow Sighting of Bushing Position.
Check Stock

Maureen 29090 Anchor pin Bushing kit (Truck)/Bushing Removal Tool/Bushing Tools, Black, 14.5 x 4.75 x 1.25

  • This professional grade subframe bushing installer and remover tool set is compatible with BMW E32 E34 E38 E60 E65 E66..
  • For replacing the subframe bushings without the need for removing the rear axle assembly..
  • The fine thread and thrust bearing allow the bushing to be fitted quickly without hassle..
  • It is Ideal for replacing the subframe bushings whilst still on the vehicle, and without the need for removing the rear axle assembly..
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

Alltooetools Subframe Bush Removal Tool Kit Compatible with BMW E32 E34 E38 E60 E65 E66

  • Includes One Bushing Remover/Installer Kit.
  • Features a Design that Allows Replacement of the Rear Axle Carrier Ball Joint with the Carrier in Place.
  • Offers Service for: E38, E39, E52, E53, E60, E61, E63, E64, E65, and E66.
  • Applications Include: BMW 528i, 528i Wagon, 540i, 540i Wagon, 525i, 525i Wagon, 530i, 740i, 740il, 750il, and all 1995 - 2003.
  • Expertly Designed and Crafted to the Exacting Standards Expected from CTA Tools.
Check Stock

JessEm Model 08350 Dowelling Jig Master Kit, Black (08350-)

  • APPLICATION: Create 1/4, 3/8, and 1/2-inch dowel holes on the end or face of your work piece.
  • MULTIPLE DOWEL HOLE CONFIGURATION: Locations of dowels can be pre-set in 1/8-inch increments, perfect for creating multiple dowel hole configuration.
  • BUILT-IN ALIGNMENT SLOTS: Built-in alignment slot allows you to match up dowel holes that are spaced further apart for perfect aligned dowel holes.
  • STURDY CONSTRUCTION: Constructed of precision CNC machined aluminum, anodized for durability and laser engraved for fast set ups.
  • INCLUDED GUIDE BUSHING CARRIER: Includes 3/8-inch guide bushing carrier with 5 guide bushings, 1/2-inch guide bushing carrier with 3 guide bushings, and 1/4-inch guide bushing carrier with 7 guide bushings.
Check Stock

Swiss Madison Well Made Forever SM-BT01C, Chrome

  • Allows installer to pre-set water temperature for maximum safety and comfort.
Check Stock

OEMTOOLS 27119 Bearing and Race Installer Set, Seal Driver Set, Bearing Race Installer, Seal Installation Tool, Bearing Install Tool, Axle Seal Installer

  • ASSIST IN REPAIRS: This bearing race and seal driver set aids in wheel bearing repairs and rotor repairs.
  • Remove and install bearing races of all sizes with bearing driver set.
  • Bearing race punch set helps correct suspension system.
  • PREVENT DAMAGE: The seal installer kit prevents damage to race and axle housing.
  • Don’t have to use a power tool to use this bearing and seal driver.
  • EASY TO USE: The heavy duty seal driver takes minutes to use and saves energy.
  • Race bearing and seal driver set comes with easy instructions.
  • Discs and handles with tool bearing and race installer set can be organized in sturdy carrying case.
  • ADAPTABLE FIT: Bearing installation tool comes with 9 driver discs to fit most standard wheel bearings.
  • Driver discs with set are: 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch.
  • VERSATILE TOOL: Flip discs in bearing pusher over and use to install seals.
  • Bearing and race installer kit is multifaceted.
Check Stock

National Oil Seals 710493 Axle Shaft Seal

  • Compatible with Jeep Vehicles with Dana Model 30 Non-disconnect Front Axles 1994-1996.
  • Material：Made of high quanlity steel with great strength，black oxide finish. excellent solid and durable with great rust..
  • Similar to Stallion ST-190 , compatible with 6764A Axle Seal Installer with 6797A and 6798A.
  • This tool makes quick work of installing the inner axle seals without damage..
  • Package Included : 4pcs/set Inner Axle Seal Installer Set.
Check Stock

Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude

  • Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
  • Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
  • Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
  • Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
  • High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check Stock

Performance Tool W89710 Harmonic Balancer Installer

  • Works on most European and Asian vehicles including BMW, VW, Toyota, Honda, Kia and Hyundai.
  • Services harmonic balancers as well as under drive pulleys and recessed crank threads on Dodge Hemi, GM Gen III/IV, and Ford 4.6 and 5.4 modular engines.
  • Set includes the traditional installer adapters as well as long reach adapters for late model applications.
  • Special adapters make this a complete master harmonic balancer installer set for most car and light truck applications.
  • Heavy-duty forcing screw has internal threads to fit the threaded adapters, Blow molded case keeps set components organized for easy selection.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock