Reviews Bumper Coating

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2013 for Chevrolet Silverado 1500 Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 for Chevrolet Silverado 1500.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add....
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced....
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with....
Check Stock

Hooke Road Wrangler JK Front Bumper + Rear Bumper Combo w/All LED Lights Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road front & rear bumper combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors Sahara Rubicon Sport.
  • Winch Plate & Hitch Receiver & D-rings - Two solid D-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength. 4.75 ton capacity D-rings (9500lb. rated) included. (Front Bumper) built-in winch plate for up to 12,000 lb. (winch not included). (Rear Bumper) built-in hitch receiver for up to 9500 lb..
  • Heavy Duty Construction & Corrosion Resistance Finish - The bumpers are manufactured from durable 1/8" steel sheet and 1.9"X0.06" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included).
  • Package Include - 1 x wrangler jk front bumper.
Check Stock

Hooke Road JK Rear Bumper with Spare Tire Rack + Steel Front Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road Front Bumper & Rear Bumper w/Tire Carrier Combo Fits for Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors(Exclude 2018 Wrangler JL)..
  • Heavy Duty Construction & Corrosion Resistance - The bumpers are manufactured from durable 5/32" steel sheet and 2"X0.120" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance..
  • Front Bumper - Built-in 10*4.5" winch plate for up to 12,000lb. winch.
  • Two D-rings and 4x 18W LED lights are included..
  • Rear Bumper w/Tire Carrier - Include 2" standard receiver hitches.
  • Two D-rings and 2x 18W LED lights are included.
  • Tire carrier open with door, accommodate up to a 37" tire..
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included)..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 1987-2006 for Jeep Wrangler TJ Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 1987-2006 for Jeep Wrangler TJ.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware..
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation. Without parking sensor holes..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2005-2015 for Toyota Tacoma Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 for Toyota Tacoma.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2018 for Jeep Wrangler JK Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 for Jeep Wrangler JK.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

Hooke Road 05-07 F250 F350 Front Bumper w/Winch Plate & LED Spotlights for 2005 2006 2007 Ford F-250 & F-350 Truck, Solid Steel Full Width Aftermarket Bumper

  • 【Compatibility】 - Discovery Front Bumper for 2005 2006 2007 Ford F250 F350 Models. Bumper weight: about 94 lbs.
  • 【Full Protection Ram Bumper】 - 3-piece modular design. Rugged styling and excellent protection. Perfectly follows the body lines. Get through the treacherous off-road terrains with help of the Hooke Road Discovery Front Bumper. This awesome component is designed to provide you with excellent front end protection.
  • 【Practical Design】 - Comes with a built-in winch plate that can handle up to 12,000 lbs of winch. Equipped with 2×18w LED spotlights. Pre-cutouts that work with factory tow hooks. Equipped with 2 hooks on bull bar that accommodate a 22-inch light bar (Light bar not included)..
  • 【Heavy-Duty Construction】 - Made of 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) steel for the winch plate and mounting structure plate.
  • 【Durable Coating】 - Textured black powder coat finish & Premium E-coating process inside for long-lasting durability and corrosion resistance.
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Carhartt Women's Gilmore WP 5" Soft Toe Hiker Hiking Boot, Grey Nubuck, 8.5

  • Storm Defender Waterproof breathable membrane allows moisture to escape while keeping your feet dry..
  • Soft Toe styles meet ASTM F2892-18 standard..
  • Heel Kicker utility ledge for easy removal of boots..
  • Texturized PU Toe Bumper Coating. The texturized PU toe bumper coating is designed to provide extra abrasion resistant durability..
Check Stock

Carhartt Women's Gilmore WP 6" Soft Toe Hiker Hiking Boot, Tan, 8.5

  • Storm Defender Waterproof breathable membrane allows moisture to escape while keeping your feet dry..
  • Tan nubuck leather with high abrasion resistant 1200D material..
  • Soft Toe styles meet ASTM F2892-18 standard..
  • Heel Kicker utility ledge for easy removal of boots..
  • Texturized PU Toe Bumper Coating. The texturized PU toe bumper coating is designed to provide extra abrasion resistant durability..
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock