Reviews Broken Tap Drill Bits

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • ...s cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2".
  • Wildly range of adaptations:Can be used with Power drills, flat or allen wrenches,tap adapters. ONE-YEAR WARRANTY & 24HRS ONLINE SERVICE by XEWEA.
Check Stock

ACETOP 6 Pcs Combination Tap Drill Bit HSS Titanium Coated 3-in-1 Metric Hex Speed Drill Thread Tap Set Spiral Screw Tapping Bit Tool for Drilling Tapping Countersinking, M3 M4 M5 M6 M8 M10, Gold

  • [Specifications and packaging]: 6 pcs multi-function drill tap bits.Include size: 6-32NC, 8-32NC ,10-32NC, 10-24NC, 12-24NC, 1/4-20NC..
  • [Fitment]: Hex shank tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Drill tap bit set is a classic high speed steel structure + titanium coating..
  • [Advantage]: Combination titanium drill bit 1/4 inch hex shank fits into power tools more easily and securely..
  • [Quick Replacement, One-Click Drilling]: Thread drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Straight Fluted Screw Extractor Set 5 Pcs M4-M18 | 3/16-Inch to 5/8-Inch Easy Out Bolt Extractor Set for Broken Bolt Thread Repair Carbon Stee

  • 1.STRAIGHT FLUTED SQUARE BROKEN SCREW EXTRACTOR：Solve the problem that the broken screw cannot be removed. 5 models can deal with metric M4-18 or....
  • 2.SCREW RANGE USE:NO.1 M4-M6~2.2-4.6MM Drill Bits.
  • 3.SQUARE CLAMPING:The tail is square, which is convenient for the tap to clamp and manually exit the screw..
  • 4.STRAIGHT FLUTED: Directly and quickly jam the inside of the screw after drilling to facilitate the removal of the screw..
  • 5.THE SCREW TYPE IS APPLICABLE: Phillips screw, internal hexagon screw, external hexagon stud, flat screw, etc., as long as the screw thread diameter....
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set

  • 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
  • 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
  • VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
  • HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
  • CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
  • DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
  • HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
  • MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
  • HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • ...s cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2".
  • Wildly range of adaptations:Can be used with Power drills, flat or allen wrenches,tap adapters..
Check Stock