Reviews Drill Bit To Drill Out Broken Bolt

NEIKO 01925A Screw-Extractor and Left-Hand Drill-Bit Set, HSS M2 Steel Drill Bits, Alloy Spiral Flutes, Reverse Drill-Bit and Bolt Extractor, Easily Remove Stripped Screws and Broken Bolts, 10 Pieces

  • BOLT EXTRACTORS: Extraction bits easily remove broken screws, studs, bolts and other fittings effectively. Stripped bolt remover and extractor works on seized bolts, broken fasteners, and commonly called an easy out..
  • LEFT HANDED DRILL BIT: Left-hand drill bits are made from cobalt fortified high speed steel for increased durability and service life. Reversed drill bit are used for removing broken bolts or studs turning left to prevent further tightening of the bolt or screw..
  • SPIRAL FLUTES: Unscrew tool with spiral flute bit dig into the screw, increasing grip as torque is applied for removal of screws, fasteners and bolts. Strip screw extractor kit gets those stubborn fasteners out..
  • METAL CARRYING CASE: Stored in a durable metal index carrying case for easy organization and storage with all sizes that are clearly labeled. Carrying size for when WD40 or easy out lubricant doesn’t get the job done..
  • INCLUDES: Sizes: Left hand bits / reversed drillbits - 5/64", 7/64", 5/32", 1/4", 19/64" and Matching Alloy Extractors (stud outs) - #1, #2, #3, #4, #5 in a ....
Check Stock

Gifts for Men - Damaged Screw Extractor Kit Stripped Screw Extractor Set DIY Hand Tools Gadgets Gifts for Men Broken Bolt Extractor Screw Remover Sets

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

Broken Screw Extractor set Stripped screw remover Easy out bolt extractor set Left hand drill bits 11PCS Screw remover and extractor Grabit pro screw extractor

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • ...over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt extractor can work on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few. Meanwhile, comes with a box which make it so portable for easy carrying..
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Todays Tools scrwgrb001 Screwdriver Grip

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Stripped Screw Remover Set - 6 Pieces - Black Nitride

  • 6-PIECE STRIPPED SCREW EXTRACTOR SET – this kit includes a screw extractor bit to remove all common sizes of damaged, stripped, or broken screws. BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • BLACK NITRIDE FINISH – helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL – typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design with a total of 5 bit sizes..
  • EASY TO USE – PLEASE WATCH THE PRODUCT VIDEO FOR FULL INSTRUCTIONS. Set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole. Switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw..
  • MUST-HAVE TOOL – whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the damaged screw out and your project back on track..
Check Stock

Damaged Screw Extractor Set for Broken Rusty Screw, Cool Gadgets Gifts for Men and Women, A HassleFree Broken Bolt Extractor and Screw Remover Set HSS M35 (70 HRC)

  • Extra Strong, Reliable and Durable M35 HSS High-Speed Steel – The stripped screw extractor is manufactured from High Speed Steel (HSS) M35 with a 70 HRC hardness(Far Better than 6542, 4341 Material), which effectively removes broken screws from any surface..
  • Solve Any Broken Screws – This Damaged Screw Extractor Set works with any drill on any screw or bolt.With our dynamic set of extractor drill bits, removing stripped, painted over, rusted or rounded screws & bolts has never been easier or more efficient !.
  • Easy to Use - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next use the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • Gifts for Men and Women, Holiday Gift Guide - This Damaged Screw Extractor makes an amazing gift for any occasion. A must-have stocking stuffer ....
Check Stock

XDOVET Screw Extractor Set, Screw and Bolt Extractor Set, Easy Out | Heavy-Duty | Rocket Socket-25PCS

  • 【25 pcs bolt extractor set&multi-application】 Extractors from 1/8 inch (3.5mm) to 7/8 inch (23mm) by 1/32” increment and comes with a heavy-duty storage case.Extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications..
  • 【Precisely machined aggressive multispline teeth】The internal thread with reverse spiral flutes design to bite down to provide maximum gripping power, the more you turn, the tighter the socket grips.Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping..
  • 【High-visibility size】 Extractor size and recommended drill bit size are etched on each tool for quick selection of the right drill bit.Heavy-duty blow-molded case lets all the bolt remover stay organized and take your set on the go.Compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools. The knockout pin for easier removal..
  • 【Premium industrial grade material】Made of heat-treated high-quality high-carbon steel (chromi....
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • EFFORTLESS SCREW & BOLT EXTRACTION: Use the ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each co....
Check Stock

Topec 55-Piece Screw Extractor & Broken bolt extractors, Multi-spline Extractors, and Drill Bits for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts & Screws

  • 【PREMIUM INDUSTRIAL GRADE MATERIAL】 - Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel)，is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins..
  • 【55-PIECE MULTIFUNCTIONAL SCREW & BOLT EXTRACTOR SET】- It contains 16 high speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
  • 【WIDE RANGE OF APPLICATIONS】Our screw and bolt extractor kit makes fastener extraction a breeze. the Drill Bit Guide complemented by the HSS drill bit provides the user with a clean and precise screw extraction. Damaged screws and bolts will be easily extracted..
  • 【EXACT SIZE】:16 high speed steel drill bits Size:（5/64"，7/64"，1/8"，5/32"，3/16"，7/32"，1/4"，19/64"，9/32"，5/16"，11/32"，3/8"，13/32"，7/16"，15/32"， 1/2"), 13 multi spline extractors Size：(1/8"，5/32"，3/16"，7/32"，1/4"....
Check Stock