Reviews Brazing Powder

Hot Max 24000 Brazing Flux Powder 8-Ounce

• For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
• This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
• Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
• Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
• Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

• Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
• Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
• Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
• Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
• Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
• High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

• Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
• Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
• Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
• Centurion series regulators with Protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate Gas control.

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

• 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
• 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
• 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

• NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
• HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
• PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
• WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
• AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..

Hot Max 24184 Aluminum Brazing Flux for Welding

• Formulated specifically for torch brazing aluminum.
• Normally used with 4047, 4043, or 1100 brazing filler alloy.
• Can also be used for furnace and automatic flame brazing operations.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

50 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

• NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to use..
• HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
• PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity..
• WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals..
• AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

K-T Industries 2-2750 Brazing Flux, 0.5 lb

• Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
• Country of Origin (subject to change): United States.

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

• Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
• Copper (Cu): Rest. For the best results..
• Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
• Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
• Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
• Service: Fox Alloy Time-proven formulation.
• A team of experienced welding engineers ready to answer all your welding questions.

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

• Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
• High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
• Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
• Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..