Reviews Brass Spring Valve

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

  • SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed horizontally or vertically.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.
Check Stock

MaxSen Deck Mount Single Hole Double Handle Pull Out Spray Commercial Pre Rinse Restaurant Kitchen Faucet (MS-5801A)

  • 【Single Hole Deck Mount Commercial Faucet】Heavy Duty Brass Faucet Body..
  • 【UPGRADE! No-screw design Spay Valve】1.42GPM (5.38LPM) Water Saving Spray Valve..
  • 【Brass Kitchen Faucet】Brass Compression Cartridges with spring check to prevent cross flow.
  • 【Easy Installed Faucet】Built-in water sealing washer , no need to apply PTFE tape..
  • 【Kitchen Sink Faucet with Sprayer】Durable Pressure and Heat Resistant Stainless Steel Hose With Food Grade Polyurethane Inner Tube..
Check Stock

Joywayus Brass Check Valve 3/4 NPS Thread Female One Way Backflow Preventer Check Valves Pack of 2

  • This valve is used to prevent the back flow of fluids.
  • Maximum pressure rating 200 psi，200 WOG (water, Oil, gas).
  • This valve has a brass body with a stainless steel spring for long-lasting durability.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

  • 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
  • 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from....
Check Stock

Primeonly27 10 pcs AV04 Air Conditioner Access Valve Core & Cap Core Remover 1/4

  • The core is a poppet valve assisted by a spring that is threaded into the steam.
  • Each valve has a core and a cap with valve core remover..
  • The caps are made of brass, they are provided with core remover and have an inside rubber o-ring.
  • The stem is a self-contained valve which opens to admit gas to a chamber.
  • 10 New Service / Access Valves 1/4 SAE x 1/4 O.D. x 4" stem. Heavy Duty.
Check Stock

EZ-FLO 20405LF Brass In-Line Check Valve

  • ✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
  • ✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
  • ✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
  • ✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
  • ✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..
Check Stock

AUTOKAY 10x HVAC AC Schrader Valve Core Remover Cap Tube 1/4' SAE * 1/4' OD * 4.65' Stem

  • 10 New Service / Access Valves 1/4 SAE x 1/4 O.D. x 4.65″ stem.
  • The core is a poppet valve assisted by a spring that is threaded into the steam.
  • Each valve has a core and a cap with valve core remover.
  • The caps are made of brass, they are provided with core remover and have an inside rubber o-ring.
  • The stem is a self-contained valve which opens to admit gas to a chamber.
Check Stock

KIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.

  • Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
  • Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
  • Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.
  • Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
  • Ideal for removing valve springs, spring retainers by compressing....
Check Stock

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
  • when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock

Maxsen Deck Mounted Type Commercial Kitchen Sink Faucet Pre Rinse with Add-On Spout for Food Service Commercial Kitchens Restaurant Hotel Application Tap MS-5801BDP

  • 【Heavy Duty Brass Faucet】Brass Compression Cartridges with spring check.
  • 【UPGRADE Spray Valve】Powerful Jet Spray, 1.42GPM (5.38LPM) Water Saving Spray Valve..
  • 【Easy Installation】 Built-in water sealing washer , no need to apply PTFE tape..
  • 【Commercial SINGLE HOLE Faucet】47'' (1193mm) in Height for Commercial or Home Kitchen.
  • 【12“ (305mm) Add on Spout 】304 Stainless steel spout and Pre-rinse sprayer. The faucet comes with a 12 inch long touch spout. With the high....
Check Stock

Milton S-437 TR VC 2 Screwdriver Type Valve Cap - Box of 5

  • Nickel plated brass, screwdriver type, TR VC 3.
  • Built in valve removal slot for easy installation and removal of valve core.
  • Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skincard.
  • Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skin card.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm²) pressure.
  • EASY STORAGE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” ....
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock