Reviews Brass Manifold Valve

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

Aupoko R134A Self-Sealing Can Tap with R134A Tank Adapter, 1/2’’ Acme to 1/4’’ SAE Refrigerant Can Bottle Tap Opener with 1/4’’ SAE Female and 1/2’’ Acme Male Adapter

  • ...IBILITY ---- The R134A self-sealing can tap refrigerant dispenser with tank adapter, connects all R134A automotive air conditioning refrigerant cans. Refrigerant bottle opener with 1/2’’ ACME LH female/internal thread, the 1/4’’ SAE male/external cooling pipe connection thread can direct fitting for R12 R22 manifold. The 1/4’’ SAE female x 1/2’’ ACME male tank adapter fitting for R134A manifold..
  • ☞ R134A SELF-SEALING CAN TAP VALVE ---- This r134a self sealing can tap designs with hand operated punch/valve control, it can only be used for self-sealing cans with 1/2’’ ACME thread (Can capacity usual greater than 6OZ or so-called big cans), either cannot be used on puncture style cans..
  • ☞ USEFUL TANK ADAPTER ---- The R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" ACME male flare, connects to R134A manifold..
  • ☞ PREMIUM QUALITY ---- This R134A refrigerant self-sealing can tap with adapter is made of heavy-duty brass alloy for durable using, with screw-on design and safety check valve, even working under extreme conditions, features with long-lasting seals to prevent leaking..
  • ☞ 1 YEAR WARRANTY ---- This self sealing r134a can tap with brass tank adapter comes complete with 12 months warranty. If the dispe....
Check Stock

Pro-Force FT10 10-Gallon Portable Air Tank

  • Equipped with air pressure gauge, air line shut-off valve, pressure relief valve, easy access fill valve, 3-Feet by 1/4-Inch air hose and air chuck.
Check Stock

R12/R22/502/R290/R600a Premium Recharge Hose #3313

  • [WIDE APPLICATION] The R12 AC flow control valve adapter fits for R12 R22 air conditioner manifold with 1/4" Male to 1/4" Female. The R410 Refrigerant....
  • [FUNCTION] The valve has the adjustable opening function for convenient use..
  • [DESIGN] The R12 refrigeration charging safety adaptor with 1/4" SAE and 1/4" Female Thread. The R410 refrigeration charging safety adaptor with 1/4"....
  • [PREMIUM QUALITY] The R12 R22 R410 control valve adapter is made of high quality brass material, with high strength and durable to use..
  • [SERVICE GURANTEE] Package include: 1Pc x R12 R22 Refrigerant Charging Valve(Blue). 1Pc x R410 Refrigerant Charging Valve(Red). If you have any other....
Check Stock

CO2 Distributor Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold, Co2 Air Manifold, Kegerator Splitter, 2-way Kegerator Distributor Manifold 1/4" with Integrated Check Valves by MRbrew

  • Gas manifolds/distributors allow you to dispense your beer from multiple kegs. They are installed to create a faucet draft system. This means that you can dispense your beer and beverages quickly for your guests while maintaining equal pressure from all to to all of your faucets. A gas manifold can split the delivery of gas into several divisions to serve the draft beer system..
  • SAVE MONEY by using a single CO2 tank for multiple kegs. Great for force carbonation or dispensing! This Air Manifold / Distributor is designed to allow you to use one regulator to supply two different kegs. This is the same high-quality air distributor we use in our Kegging kits. LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. It contains a brass cock valve with a check valve. Check valves are very important to keep the beer from backflowing into your system!.
  • Has predrilled Holes for mounting and you can expand the unit by removing plug and adding an additional valve or additional manifold, so it grows with your system. This manifold features output and input barbs made for....
Check Stock

JIFETOR 3 Way AC Manifold Gauge Set, HVAC Diagnostic Refrigerant Charging Tool for Auto Household R404A R134A Refrigerant, Quick Couplers Adapter Valve Core Tool (3FT Hose, Can Tap, Blue Case)

  • AC MANIFOLD GAUGE: 3 way double movement brass manifold auto AC gauge, durable and anti-corrosion. Blue low pressure gauge with range -30inHg~250PSI, and red high pressure 0~500PSI, Celsius unit. 2-3/4″ easy to read large dial with color coded scale, and sight window on the manifold help to monitor refrigerant charging and recovery better and easily. Built in calibration screw and no-flutter pointer ensure measurement accuracy. Perfect for R404A R134A.
  • 3 3FT COLOR CODED HOSES: Refrigerant charging kit uses rubber nylon resin hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is 2500PSI. Each side is loaded with 1/4″ female brass fittings for easy connection. Red hose connects red gauge side 1/4″ male flare to red quick coupler, blue to blue, and yellow hose connects AC gauge middle charging port to can tap or vacuum pump.
  • AC R134A QUICK COUPLERS: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with R134A service port. Connect the blue coupler to AC suction service port and the red one to AC discharge service po....
Check Stock

AURELIO TECH UPGRATED Version 4 Way A/C Manifold Gauge Set Fits R134A R410A R404A R22 Refrigerants with 5FT Hose, 3 Acme Tank Adapters, Adjustable Couplers and Can Tap

  • 2020 UPGRATE VERSION: 1) Can tap with back-flow preventer. 2) 100% brass and aluminum valve gauge body, knobs are made of brass instead of plastic..
  • Tester Freon gas Service Diagnostic AC Gauges.
  • R134A R410A R404A R22 Manifold Gauge Set A/C..
  • Fahrenheit degree unit with easy to read instrument panel..
  • red for high pressure, blue for low pressure, yellow for refrigerant bottle with ACEM 1/4".
  • 1x adjustable can tap (piercing-style)(1/4" male).
Check Stock

5 Loop Radiant Heat Manifold, 5-zone PEX Tubing Manifolds with Compatible Outlets, for Hydronic Radiant Floor Heating (1/2" 3/4" PEX adapters sold separately)

  • Its nickeled brass material are higher thermal conductivity, faster heating and insertion into plastic pipes than stainless steel ones..
  • 5 loops with 1 extra drain and cap, 1” FPT supply and return, up to 1.6 GPM high flow meter..
  • Compatible to both 1/2″ and 3/4″ pipes outlets. Adapters not included please search AB manifold adapters 1/2 and 3/4..
  • Heavy duty stainless steel mounting bracket.
  • It includes automatic air vent, shut-off valve, drain valves with outlet caps, temperature gauge, flow valve, balancing valve/manual wheel for supply and return trunks..
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Aupoko R134A Self-Sealing Can Tap with R134A Tank Adapter and Valve Core Remover 1/4’’ SAE Valve Refrigerant Dispenser with 1/4’’ Female and 1/2’’ Male Adapter for Air Conditioner Manifold

  • ❄ WIDE COMPATIBILITY --- The R134A self-sealing can tap refrigerant dispenser with tank adapter, connects all R134A automotive air conditioning....
  • ❄ R134A SELF-SEALING CAN TAP VALVE --- This R134A pro ac can tap valve designs with hand operated punch/valve control, it can only be used for....
  • ❄ USEFUL TANK ADAPTER --- The R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" male flare, connects to R134A manifold..
  • ❄ PREMIUM QUALITY --- This R134A refrigerant self-sealing can tap with adapter is made of heavy-duty brass alloy for durable using, with screw-on....
  • ❄ 1 YEAR WARRANTY --- This R134A freon can tap with brass tank adapter comes complete with 12 months warranty. If the dispensing valve fails or any....
Check Stock

Lichamp R134a Can Tap, Automotive R 134a Self Sealing Can Tap and Puncture AC Freon Can 134a Adapter Fittings, TA02

  • Freon Can Tap - Smoothly connect manifold gauge hose with the r-134a freon refill cans to properly fill your ac system..
  • Compatibility - Include both r 134a self sealing and puncture style can taps, fits EPA-required self-sealing freon can and the old-style single puncture bottle..
  • Tank Adapter and Valve Core Remover - Comes with extra tank adapter for connecting 1/4" SAE tap fitting to 1/2" ACME hose fitting. Dual head valve core tool will easily remove small or large valve cores..
  • Long Lasting Materials - The can tap are made of solid premium brass and aluminum which make them can even work under extreme conditions, features with industrial grade rubber seals to prevent leaking..
  • Easy to Work - Benefit from precise threading technology and precise valve control, you can assemble and operate efficiently without worrying about loose or leaking connections..
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Partman Fit for 190627GS 16031 Excell EXWGV

  • Pressure Washer Manifold Kit 16031 190627GS 190574GS.
  • Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
  • To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
  • Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock